PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Tech Log (https://www.pprune.org/tech-log-15/)
-   -   Fly-by-wire elements in the 747-8? (https://www.pprune.org/tech-log/405980-fly-wire-elements-747-8-a.html)

Less Hair 17th February 2010 08:44

Fly-by-wire elements in the 747-8?
 
Boeing's latest 747-8 will incorporate a partial FBW control. My question is: What exactly is controlled by that new system? I know about the roll spoilers. How about the ailerons, speedbrakes and stuff? Will these systems have any mechanical backup? How about artificial feel? Are there any new FBW-"laws" or protections? How about system or elec failures? Can't find any details yet. Thanks for any link that's a little more detailed.

SMOC 17th February 2010 11:46

Spoilers as you said plus the O/B ailerons are FBW

Speedbrakes should be as well, I'd say the spoiler mixer and aileron programmer in the wheel wells have been replaced by something new leaving the I/B aileron as the only mechanical roll control and therefore can double as mechanical backup rather than a couple of spoilers like on the 777.

Artificial feel for the roll control is a simple spring and the output is reduced by locking out the O/B aileron at high speed.

I don't think there are any new FBW-"laws" or protections however the -8 will be "tweaked" to fly like a -400.

Elec failures - with 4 engine generators I doubt they'll have any problems, the -400 is no problem with spoiler or O/B aileron issues.

A RAT has been added, I believe it's due to the wind milling speed of the GEnx-2B which are considerably bigger and only have 18 fan blades which may be the cause. I think the RAT is purely for hydraulics sys 3 from memory.


All times are GMT. The time now is 04:05.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.