PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Tech Log (https://www.pprune.org/tech-log-15/)
-   -   piston engine questions (https://www.pprune.org/tech-log/362691-piston-engine-questions.html)

downwind 18th February 2009 02:40

piston engine questions
 
Dear all,

I have a question;

An engine has a compressio ratio of 5:1, if the total volume is 1500cc, the swept volume will be??

Oh and ps does anyone have a good load of pratice piston enigne exams for an upcoming exam psiton engines exams I have to sit?

Thank you.

barit1 18th February 2009 03:26

The 5:1 says the total volume can be considered 1500cc, divided into 5 parts.

One piston stroke displaces four of those five parts.

So, one part is 1500/5 or 300cc. Four parts is thus 1200cc; this is the swept volume.

But it's been a while...

nick14 18th February 2009 10:51

Is it not 6 parts with the 5:1??

My calculations make 1 part 250, multiplied by 5 to make 1250 swept volume.

It has been a long while for me too!

Nick

barit1 18th February 2009 13:53

No - in the bottom dead center state, the volume is 1500cc.

At top dead center the volume is 1/5 of 1500, or 300cc.

(That's how compression ratio is defined, isn't it?)

So the swept volume is: 1500-300 = 1200

barit1 - The Birthday Boy :)

qiutong 18th February 2009 14:15

Happy birthday Barit1!

I agree with you. Nick14, you have taken six total parts, five swept and one combustion chamber, and sqeezed them into the one (combustion chamber) thereby describing a 6:1 comp ratio. 5:1 equals five total into one. The one is part of the total.

Hakeem 18th February 2009 17:25

@ barit 1
 
Many more happy returns!!!!!!!
And ofcourse ur right and the given ratio is just 5:1 and not 6:1.....:ok:


All times are GMT. The time now is 04:02.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.