PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Tech Log (https://www.pprune.org/tech-log-15/)
-   -   wx code decode help (https://www.pprune.org/tech-log/108729-wx-code-decode-help.html)

danyoren 12th November 2003 22:41

wx code decode help
 
Hi everybody,

came across this METAR of KYIV UKBB

can anyone explain to me the part after the QNH?

UKBB 121500Z VRB01MPS 6000 SCT007 M01/M02 Q1030 86CLRD70 NOSIG

thanks
danny

lowfield heath 12th November 2003 23:04

These 8 numbers/digits are in Standard eight figure group appended to routine motne/opmet (actuals)

In this example the crucial thing is as follows

//CLRD// (insert any digits in first and last two places) means that the previously broadcast contamination has ceasec to exist (eg snow, ice etc).

For full details Met section of Jepps page 71/2

Hope this helps

Regards

danyoren 12th November 2003 23:25

Thanx Heath
I am now more knowledgable than my Instructor pilot.

Danny
:O :ok:

bsevenfour 13th November 2003 09:38

Danny for the digits either side of cleared:

86.....The first two digits are the runway designator. If there are parallel runways the left hand one gets the normal runway designation and the right parallel has 50 added to it. So 36L would get 36........ while 36R would get 86........ If 88 is used the information applies to all runways

......70 this is measure of the braking coefficient. Braking coefficients of .40 and above are good.

danyoren 15th November 2003 15:20

thankx

DANNY
:ok:


All times are GMT. The time now is 06:16.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.