PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Tech Log (https://www.pprune.org/tech-log-15/)
-   -   Formula for VHF range anyone? (https://www.pprune.org/tech-log/103115-formula-vhf-range-anyone.html)

Snoopy 21st September 2003 10:45

Formula for VHF range anyone?
 
I seem to remember a formula for calculating the VHF range of a transmitter taking into account the curvature of the earth. I think that it was:

Square root (height in feet) x 1.something

I have forgotten what something is....does anyone know what something is and/or can actually confirm whether the formula is correct and whether the answer unit is statute miles or nautical miles?

Burger Thing 21st September 2003 11:26

I believe it is 1.25 x SQR(Transmitter height in feet) + 1.25 x SQR(Receiver height in feet)

The answer should be in nautical miles

But that works of course only for the line of sight. Any big mountains in between will spoil the business.

donut king 21st September 2003 11:59

just math!!!
 
1.25x (square root distance agl...in feet)

AGL= distance above transmitter.

Answer= xxxx n.m.


I think!!!!!!!!

Therefore... 5000 ft AGL equals signal reliability of 88.39 n.m. Sounds about right!

Anyone else please correct/add input if I'm wrong!

D.K.

P.S. DME is another story!!!

Ex Douglas Driver 21st September 2003 12:05

d = square root (h^2 + 2hr)

where:
h = height above earth's surface
r = earth's radius = 6371km or 19418808ft

1000 FT = 32.4 NM
10000FT = 102.5 NM

This gives the visible horizon from one point. If you want to figure out the range between 2 elevated objects, then add together the 2 values of d.


So that would make it
d (in NM) = 1.025 x square root height in feet

Snoopy 21st September 2003 12:21

Thanks for the input!
Much appreciated


All times are GMT. The time now is 16:59.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.