APU Test button
Any specific procedure should use when we make APU auto shutdown test ...
https://cimg8.ibsrv.net/gimg/pprune....56181d95a.jpeg |
Yes. The procedure is don't touch it.
That the maintenance panel! |
Follow the AMM Chapter 26 (Fire Protection) procedure with associated warnings and cautions if you are an engineer. If not, leave it to your engineers unless you have a specific FCOM procedure to use it.
It injects a simulated ASD signal so warnings, functions and indications can be checked by BITE test. |
Just watch out for the ‘wings fall off’ button. It’s on the same panel. So take your time. :E
|
But it's just so inviting ;) - it's a bit like the Simpson's - "What is your fascination with my forbidden closet of mystery"....must.....push.....button.....
|
On the B-727 anytime you did the fire test with the APU running, you did an APU auto shutdown test.:)
|
All times are GMT. The time now is 16:17. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.