PT6 Factory Installed Compressor Wash Ring
 

Does anyone have a photos of this they they can post here. I'm after a photo for a class and I can't find one on the internet.

I do have plenty of photos of the hand held compressor wash ring, but that's not what I'm after.

This video shows it with decent views of it looking into the inlet plenum, and shows it spraying.


You might be able to get a still shot you can use from the video.

For the King Air B300 PT6A-60A:
Beechcraft Engine Wash Rings Kit 130-9003-xx (xx being a number specific to your aircraft serial number)
Aircraft: B300(350), B300C(350C)
KIT NO. 130-9003-xx

An alternate solution is the Tronair (blue) removable flexible hose ring.

You may also need the Turbine Wash Tube PWC32271.

For King Air, most important is the EXTENDED DRAIN KIT HBS/TPA 300EDM (one kit for both engines). This will avoid removing and re-installing the lower cowlings at every engine internal wash or rinse.

A good source is Kadex Aero Supplies in Canada.
https://cimg0.ibsrv.net/gimg/pprune....e306ee9b8e.jpg


https://cimg6.ibsrv.net/gimg/pprune....2b16b835d3.jpg
https://cimg8.ibsrv.net/gimg/pprune....429feda7ea.png