I fail to understand how you can actually have a `DH of 0 ft`, [...] You would be on the runway (hopefully!) at this point anyway. What now forms the basis of your `decision`. [...]? |
Cat 3B. The DH is either a positive number (and there aren’t many around anymore) or it’s no DH, not DH 0’. On my ac where we set 0’ because it doesn’t go any lower there are no auto calls of ‘approaching DH or minimums’ and 0’ actually means NO DH. So providing everything keeps working (ASA doesn’t say MANLAND, Flare annunciates) it will land with no requirement for any visual reference.
|
Originally Posted by Uplinker
(Post 10790069)
I would say the DH is the (final) point at which you elect to continue the autoland, or go-around, and even with a DH of 0 ft there is still the rollout tracking and stopping part of the autoland left to go. If the aircraft landed way off to one side of the runway (or even the grass) instead of on the runway centreline, you might elect to go-around, even though you had "landed". |
Thanks FD; its good to hear that some aircraft systems are being used with matching certification and operational approval. Also, that common sense is not yet flattened by 'training for the sake of training'.
What was the other aircraft type. Uplink, 'off the runway'; a highly improbable scenario given system integrity requirements, and instrument displays and alerts, e.g. LOC deviation. Operational thinking from 'the early days' has evolved with increasing experience and knowledge. Low DHs relating to visual cues became 'confirm a runway', which was more for the pilots peace of mind than operational practicability. Also changes in procedure with more knowledge of realistic minimum visibilities, 50-70m RVR could be 00 met vis; personal experience lowest was 90-110m RVR (ATC / fire rescue may limit operations to 50/75 m) GA from the runway might be muddled operational regulatory thinking about a mixed integrity auto-land and rollout systems; fail-op land, fail-passive rollout. Not a lot of common sense in some operational regulation. dh, wiggy; ok. Why not look outside and enjoy the view; there is a lot to see, and many differences day/night, different runway surfaces/lighting. LOC deviation on the runway - unlikely; yet in VMC practice it was quite a surprise when ATC switched runways and ILS while ground-roll was still engaged. (I think that LOC display remained centred, but the aircraft didn't). |
Originally Posted by Uplinker
(Post 10790069)
I would say the DH is the (final) point at which you elect to continue the autoland, or go-around, and even with a DH of 0 ft there is still the rollout tracking and stopping part of the autoland left to go. If the aircraft landed way off to one side of the runway (or even the grass) instead of on the runway centreline, you might elect to go-around, even though you had "landed". |
PEI. I love a good view as much as anyone, but with 75R my concentration is elsewhere.
SE. Absolutely if there is a DH, otherwise the casting vote is based on cockpit indications alone(GS, LOC, ASA, FMAs etc). Today’s lockdown challenge is to find approaches with a 3B DH. My starter for ten is Brescia (30/100) as the only one on our list of lo vis airfields. Good luck ! |
Interesting that some don’t want to look out of the window on 3b no DH. The basis of AWOPS training is one pilot heads out (normally PF) and one firmly heads down in (normally PM depending on operator SOP). Are you saying you see no value to seeking visual cues on a no DH approach ? A good unexpected visual cue forms another great resource if you’re lucky. Fog patches, midpoint significantly greater than 75m ? Perhaps you join the group of guys with newspapers In the windows to block out the sun or cockpit storm/ override light on in the dark because you’re IFR so there’s no need to look out.
Another lockdown question teeser. Why 75m for 3B no DH ? |
A320, fail-operational. Certified NO DH (min RVR 75m). |
Originally Posted by atakacs
(Post 10791770)
Only lurking in this thread but what does RVR 75 mean if there is no DH ? In effect does it still mean that if you don't see the runway at 75m you should go around ?
For no DH operations unless there is a failure the pilot takes no decisions and actions apart from operating non-automated stuff like the reversers. The min value of RVR = 75 is an arbitrary limit to enable vacating the runway and taxing. In the sense you'd at least will be able to repot where you are after getting lost. There are two other values of similar nature: 125 m is the min requirement for manual roll-out. 300 m for manual landing (IIRC used to be 350, happy to be corrected on this one). A proposed fully autonomous landing under nil/0 conditions exists on paper for quite some time, search the interweb for ICAO CAT IIIC. The technology does not exist yet. |
All times are GMT. The time now is 06:38. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.