Airbus a320 FINAL APP mode
Hello everyone... I just watched a video/briefing I found on the Airbus WIN Application done by captain Savary and published in January 2019. In the video, captain Savary says that the FINAL APP mode doesn’t guarantee altitude constraint compliance. (Prior to a leg that includes an FPA) Therefore the APPR push button should not be pressed until the TO waypoint is a fix with a coded FPA . (EG: 3 degrees) I never knew about that restriction and looking at the FCOM, I can’t find such a restriction.. can somebody bring clarification? thank you |
Originally Posted by saviboy
(Post 10393963)
Hello everyone... I just watched a video/briefing I found on the Airbus WIN Application done by captain Savary and published in January 2019. In the video, captain Savary says that the FINAL APP mode doesn’t guarantee altitude constraint compliance. (Prior to a leg that includes an FPA) Therefore the APPR push button should not be pressed until the TO waypoint is a fix with a coded FPA . (EG: 3 degrees) I never knew about that restriction and looking at the FCOM, I can’t find such a restriction.. can somebody bring clarification? thank you FCOM says the approach should be armed once the TO waypoint is the final descend point. I had been thinking already why but the above would make sense, althougt i do not see any explanation in the FCOM regarding it. The relevant part of the procedure: APPR pb on FCU ............................................................ ......................................................PRESS Press the APPR pb when all of the following conditions are satisfied: ‐ The aircraft is cleared for approach ‐ TO waypoint is the Final Descent Point. APP NAV......................................................... .................................CHECK ARMED or ENGAGED FINAL....................................................... ............................................................ .... CHECK ARMED |
Ok. Thanks. I just checked in a fresh FCOM as well.. I operate the aircraft in the USA and unfortunately we don’t use Airbus FCOM... which is why I didn’t see any change... thanks again... |
Note: if APPR pb is pressed earlier, FINAL APP mode may engage. As a consequence, resulting speed and altitude management in FINAL APP may be inappropriate before FDP. |
Thank youn |
Originally Posted by saviboy
(Post 10393963)
Hello everyone... I just watched a video/briefing I found on the Airbus WIN Application done by captain Savary and published in January 2019. In the video, captain Savary says that the FINAL APP mode doesn’t guarantee altitude constraint compliance. (Prior to a leg that includes an FPA) Therefore the APPR push button should not be pressed until the TO waypoint is a fix with a coded FPA . (EG: 3 degrees) I never knew about that restriction and looking at the FCOM, I can’t find such a restriction.. can somebody bring clarification? thank you in DSC-22_30-80-30-20 there is a note : Note: if APPR pb is pressed earlier, FINAL APP mode may engage. As a consequence, resulting speed and altitude management in FINAL APP may be inappropriate before FDP. They are basically telling You that it could bust the constraints, hence arm APP when your TO point is the FDP. |
All times are GMT. The time now is 20:44. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.