Go Around while flying the BUSS in A320
 

While flying using the Back Up Speed Scale (BUSS) and if carrying out a Go Around, should we retract Flaps from Flap 3 to Flap 2 or Flap 3 to Flap 1.

Hi Boyington
I had replied to one of your posts on go around. The same logic applies in BUSS. In a go around Flap retraction of one step basically comes from flap full configuration landing where the drag is too much and is mandatory with flaps full. Flap 1,2,3 are takeoff configurations but you still retract one step to keep the procedure same. With unreliable speed and BUSS activated you are landing in flap3, would you risk stalling the aircraft just to follow a ritual of one step retraction? Just leave it as they are. With UAS you are not going anywhere just level off at circuit altitude and do another approach. At circuit altitude if you are uncomfortable retract to flap2 when speed is in the upper band. In any case you never retract to one unless overweight.

Even I found this info somewhere, where it was mentioned that Go Around Flap is flap 1 in case of Back up speed Scale flying. Can you please quote the reference, I am unable to find it.