Racetrack VS Hold
in spite of being a close friend of DOC 8168, I can't seem to grasp an understanding of the difference between a racetrack and a holding pattern, same procedure design, different speed limits (propeller, jet).
I am asked to join a hold on a final approach fix, does that hold become a racetrack once I'm cleared to descend and approach? or what are the implications. many thanks again. |
Racetrack is essentially a course reversal maneuver, hold is a hold. They have different shape/size of protected airspace/MOC around them - hence different speed limits.
However, AFAIR Doc 8168 doesn't have any description of the protected airspace for racetrack. It must be somewhere deeper in procedure design docs... |
A racetrack is a protected area in which you may use the described procedure (racetrack) to descent from the fix and establish onto the approach course. Racetracks are generally provided where aircraft arrive from a variety of directions and sometimes when limited protected areas exist.
A racetrack is similar to but fundamentally NOT a hold. The two may well be aligned in most cases. The racetrack differs in that entry into the racetrack is restricted when compared to the entry into the hold. This means sometimes in order to be allowed to enter the racetrack an entry into the hold must first be achieved to establish onto the inbound course before proceeding outbound on the racetrack. Racetracks are entered similar to holding patterns but considerations:
|
All times are GMT. The time now is 14:19. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.