2 questions: B737 A/T GA mode and Hold Exit Armed!
1. You make GA-Around...and A/T is not armed. After you have pressed TO/GA, your pitch mode is TO/GA. Then you arm A/T...how you now can get A/T to GA mode? (normally A/T is armed/engaged and mode goes to GA after TO/GA pressing)
2 You are flying Hold with LNAV...you have pressed exit hold and executed it. You are still on hold and on CDU(right/below) you have exit armed. What you have to do, if you now want to cancel exit armed? (plane normally continues to fly Hold after flying over Hold waypoint) Thanks! |
1. Missed your opportunity! Use man thrust until Aa (had a small idea that you could arm it and press N1 but I don't think that it would work). You can arm the A/T however so that if you select another mode, or enter alt acquire it will go into N1 or MCP speed mode.
2. Legs page and re-enter the hold. |
OK, thanks!
|
One point on the a/t function on app. that alot of people dont seem to know and i'm sorry if you do but worth stating i think is that you can have the a/t armed but not doing anything if you simply de-select speed. This then allows you to fly the a/c manually but have the a/t system armed and usable in the event of a goaround.
|
Actually that is SOP in my outfit, however Boeing discourages that way of A/T operation since the low speed protection mode (it is NOT a true alpa floor mode) engages very fast and sometimes close to Vref which will lead to A/T interference with manual flight when not desired.
|
So deselect it again.....normal operation for us
|
All times are GMT. The time now is 21:44. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.