PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Tech Log (https://www.pprune.org/tech-log-15/)
-   -   Pedal to the Metal - Top Speed (https://www.pprune.org/tech-log/317635-pedal-metal-top-speed.html)

Gazeem 11th Mar 2008 17:55

Pedal to the Metal - Top Speed
 
I was just crossing an ETP the other day and wondering what altitude you should fly at for top speed.

Say that winds are calm at all levels on an ISA day, fuel is not an issue and you wanted to get somewhere ASAP (let's not get bogged down in airmanship issues) where would you go? Is higher better? Or would you descend to get a better TAS?

OPEN DES 11th Mar 2008 18:19

Assuming ISA,nil wind: you want to maximise your TAS.

You should fly MMO/VMO at the mach/ias crossover altitude. This depends on the aircraft type (VMO/MMO ratio). FL260/FL300 is a ballpark figure.

Cheers

FCS Explorer 11th Mar 2008 18:49

in my 738 speed limitations graph the Vmo and Mmo meet at 26000ft...

411A 11th Mar 2008 21:53

FL310-330 at M.86 is high speed for the L1011....we do it all the time, unless restricted behind an Airboos...which is never good, as the European wonder is very s l o w.....hardly gets out of its own way.:rolleyes:

misd-agin 12th Mar 2008 01:36

Posted - You should fly MMO/VMO at the mach/ias crossover altitude. This depends on the aircraft type (VMO/MMO ratio).

I agree.

Capn Bloggs 12th Mar 2008 02:51

411A,

FL310-330 at M.86 is high speed for the L1011
Is that at your Vmo? If not, you're not going as fast as you could...:E

411A 12th Mar 2008 03:28


Is that at your Vmo? If not, you're not going as fast as you could...:E
Any faster and the First Officer starts squirming in his seat...:E

Old Fella 12th Mar 2008 11:32

Tristar MMO
 
Try MMO 0.95 Mach. Cruise 0.90 Mach.

Tight Slot 12th Mar 2008 12:22

411A, stuck behind an Airbooos? Down at FL330 - hmmm, I'd be up at at least 370 in in mine even at MTOW and gladly let you sail on under...

Regards


All times are GMT. The time now is 07:13.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.