737 Take off Thrust Question
Thread Starter
Join Date: Oct 2007
Location: home
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
737 Take off Thrust Question
Hi all, Type Rating on B738 due next year. Fleet fitted with CFM56-7B26.
I am having trouble deciphering this paragraph:
"The full rated takeoff thrust for the installed engine is available at a thrust level position less than the forward stop. Fixed or assumed temperature derated takeoff thrust ratings are set at thrust level positions less than full rated take off. The maximum rated thrust is available at the forward stop"
I am unsure what 'full rated take off thrust is'
My question is what is full rated take off thrust? It's not the maximum the engine is rated produce, and it's not the derated/ATM maximum, it is somewhere between but what exactly?
Thank you in advance.
I am having trouble deciphering this paragraph:
"The full rated takeoff thrust for the installed engine is available at a thrust level position less than the forward stop. Fixed or assumed temperature derated takeoff thrust ratings are set at thrust level positions less than full rated take off. The maximum rated thrust is available at the forward stop"
I am unsure what 'full rated take off thrust is'
My question is what is full rated take off thrust? It's not the maximum the engine is rated produce, and it's not the derated/ATM maximum, it is somewhere between but what exactly?
Thank you in advance.
Join Date: Jan 2018
Location: Amantido
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Full rated thrust of 26K is set at a thrust lever angle, when you apply a derate of 24K or 22K the thrust lever angle is less than 26K. If you use assumed temperature as well (FLEX on Airbus?) the thrust lever angle is even lower for each of these ratings.
The maximum rated thrust is the maximum thrust the engine is capable of delivering with the thrust lever at the forward stop and you would use it only if terrain contact is imminent in the GPWS and Windshear escape maneuvers. And I would guess it's also more than 27K bump.
On the latest models, the full rated thrust is indicated by an amber line in the Primary Engine Indications on the Upper Display Unit. This amber line is also the limit for autothrottle operation.
The maximum rated thrust is the maximum thrust the engine is capable of delivering with the thrust lever at the forward stop and you would use it only if terrain contact is imminent in the GPWS and Windshear escape maneuvers. And I would guess it's also more than 27K bump.
On the latest models, the full rated thrust is indicated by an amber line in the Primary Engine Indications on the Upper Display Unit. This amber line is also the limit for autothrottle operation.
The maximum rated thrust is the maximum thrust the engine is capable of delivering with the thrust lever at the forward stop and you would use it only if terrain contact is imminent in the GPWS and Windshear escape maneuvers. And I would guess it's also more than 27K bump.
The max rating available for the CFM56-7 on the 737-800 is less than the max rated thrust the engine is capable of (used on the -900ER). On the shorter 737-6/7/800 models, the max ratings are lower to account for the ability of the tail to counter the thrust pitch-up (shorter aircraft means less moment arm for the tail surfaces). On the non-FADEC 737-300/500, this thrust limit was via a physical block in the throttle - on the FADEC NG this is done with a rating plug on the FADEC.
Thread Starter
Join Date: Oct 2007
Location: home
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys, but I’m still curious, What is the difference between ‘full rated take off thrust’ and ‘maximum rated thrust’ where FRTT isn’t a derate or ATM value?
Join Date: Jan 2018
Location: Amantido
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Join Date: Jan 2018
Location: Amantido
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Not quite. Max rated thrust (for the ambient conditions) is achieved with the thrust lever ~2 degrees short of the forward stop. In those last two degrees of throttle travel, you get what is known as 'headroom' - basically limited overboost. Headroom is to account for various tolerances and to make sure you can always get full rated thrust. It depends on the specific conditions, but headroom is usually between about 0.5% and 1.0% N1 (figure roughly twice that amount of thrust).
The max rating available for the CFM56-7 on the 737-800 is less than the max rated thrust the engine is capable of (used on the -900ER). On the shorter 737-6/7/800 models, the max ratings are lower to account for the ability of the tail to counter the thrust pitch-up (shorter aircraft means less moment arm for the tail surfaces). On the non-FADEC 737-300/500, this thrust limit was via a physical block in the throttle - on the FADEC NG this is done with a rating plug on the FADEC.
The max rating available for the CFM56-7 on the 737-800 is less than the max rated thrust the engine is capable of (used on the -900ER). On the shorter 737-6/7/800 models, the max ratings are lower to account for the ability of the tail to counter the thrust pitch-up (shorter aircraft means less moment arm for the tail surfaces). On the non-FADEC 737-300/500, this thrust limit was via a physical block in the throttle - on the FADEC NG this is done with a rating plug on the FADEC.
And according to the 737 technical site, the forward stop - or just short of it - is actually 27K bump, available as an option.
Join Date: Jan 2018
Location: Amantido
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Unfortunately terms can get confusing, also between the FCOM and the FCTM sometimes and I admit I might have had a brainfart.
Hopefully this image will clear your doubts. It's a screenshot from the well known 737 handbook app.
If you derate your engine to 24K the position would be less than 26K.
The FCOM goes on to say that if the EEC operate in alternate mode, you would get 26K thrust before the forward stop (or earlier than 2 degrees before the stop).
Hopefully this image will clear your doubts. It's a screenshot from the well known 737 handbook app.
If you derate your engine to 24K the position would be less than 26K.
The FCOM goes on to say that if the EEC operate in alternate mode, you would get 26K thrust before the forward stop (or earlier than 2 degrees before the stop).
If you're operating in Alternate mode, you can potentially get a lot of overboost - especially on a cold day. Again, you're not supposed to go there.
Join Date: Jan 2018
Location: Amantido
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Firewall an NG - what do you get
B737 NG Certified/Rated/Derated thrust
A couple of old threads that might help.
B737 NG Certified/Rated/Derated thrust
A couple of old threads that might help.
Thread Starter
Join Date: Oct 2007
Location: home
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
These replies are really appreciated. Thank you.
The quoted paragraph is from the company Part B technical manual - not the FCTM, so it may confusion with terminology. It suggests there is a position between max rated and the derated position, but having read these replies I think that might be a mistake.
The quoted paragraph is from the company Part B technical manual - not the FCTM, so it may confusion with terminology. It suggests there is a position between max rated and the derated position, but having read these replies I think that might be a mistake.
“Rated thrust” is what you paid for, 24k or 26k etc and occurs at a thrust lever angle less than full forward.
“Maximum thrust” is with the levers at the full forward stop, 27.2k
“Maximum thrust” is with the levers at the full forward stop, 27.2k
There is a max rating based on what rating plug is installed on the FADEC. You can only get 27.2k if that's the rating plug on the FADEC, no mater how far forward you push the throttle (assuming Normal mode - all bets off in Alternate mode).
Read the thread...
Join Date: Jan 2018
Location: Amantido
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Just to be sure on something, since I am mostly on the Classic.
The amber line on the NG with double derate option moves to indicate whatever derate is selected in the FMC. That is, on a 26K engine if 22K is selected - with or without ATM - the amber line indicates the N1 value to get 22K of thrust and not 26K.
It's been too long I've been in a NG sim. Is it correct?
The amber line on the NG with double derate option moves to indicate whatever derate is selected in the FMC. That is, on a 26K engine if 22K is selected - with or without ATM - the amber line indicates the N1 value to get 22K of thrust and not 26K.
It's been too long I've been in a NG sim. Is it correct?
Thread Starter
Join Date: Oct 2007
Location: home
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
This is from the Boeing website
"Depending on the airplane-engine model combination, extra performance-reserve thrust may be available for emergency use during takeoff and go-around. For example, performance-reserve thrust is available for a 737-700 with -7B22 engines, since the -700 airplane can accept the higher -7B24 thrust. The engine control allows takeoff/go-around thrust up to this rating when the thrust lever is pushed full forward. If the installed engine has the highest rating offered for that 737 model (for instance, a 737-600 with the -7B22 rating), there is no performance-reserve capability. Like the "overboost" thrust of the 737-100/-200/-300/-400/-500, performance-reserve thrust is for emergency use only."
https://www.boeing.com/commercial/ae...y/sy01txt.html
Having read this I believe 'Max Rated Thrust' means the maximum thrust available on the model of 737NG you are flying. So 27,300lb for every single -800 at the full stop, 24,200lb for a -700 and so on.
'Full Rated Takeoff Thrust' means the highest rated thrust for the model of CFM-56 your individual aircraft is fitted with, which should be the value shown on the IDENT page. This may be 27,300lb for a -800/-900 but may well be lower. For an aircraft with -7B26s it should be 26,400lb - and you will get that value at a TLA short of the full stop.
Obviously, from a planning perspective the extra thrust available is no good to you as you can only plan for 'full rated take off thrust' and the A/T won't give you any more - however I think I have a better idea of what the engines will actually do for me if I ask them.
Any thoughts?
"Depending on the airplane-engine model combination, extra performance-reserve thrust may be available for emergency use during takeoff and go-around. For example, performance-reserve thrust is available for a 737-700 with -7B22 engines, since the -700 airplane can accept the higher -7B24 thrust. The engine control allows takeoff/go-around thrust up to this rating when the thrust lever is pushed full forward. If the installed engine has the highest rating offered for that 737 model (for instance, a 737-600 with the -7B22 rating), there is no performance-reserve capability. Like the "overboost" thrust of the 737-100/-200/-300/-400/-500, performance-reserve thrust is for emergency use only."
https://www.boeing.com/commercial/ae...y/sy01txt.html
Having read this I believe 'Max Rated Thrust' means the maximum thrust available on the model of 737NG you are flying. So 27,300lb for every single -800 at the full stop, 24,200lb for a -700 and so on.
'Full Rated Takeoff Thrust' means the highest rated thrust for the model of CFM-56 your individual aircraft is fitted with, which should be the value shown on the IDENT page. This may be 27,300lb for a -800/-900 but may well be lower. For an aircraft with -7B26s it should be 26,400lb - and you will get that value at a TLA short of the full stop.
Obviously, from a planning perspective the extra thrust available is no good to you as you can only plan for 'full rated take off thrust' and the A/T won't give you any more - however I think I have a better idea of what the engines will actually do for me if I ask them.
Any thoughts?
Join Date: Jan 2018
Location: Amantido
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
This exactly what I had intended to say in my first post.. Shorter models have lower allowable thrust due to pitch-thrust couple.
A 737-800 with CFM56-7B26 engines at firewall will actually give you 27,3K of thrust. I stand to be corrected, but the BBJ is limited to 26K.
A 737-800 with CFM56-7B26 engines at firewall will actually give you 27,3K of thrust. I stand to be corrected, but the BBJ is limited to 26K.
Last edited by Banana Joe; 4th Oct 2020 at 18:02.
Join Date: Jan 2013
Location: Seattle Area
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
No, No, No.
There is a max rating based on what rating plug is installed on the FADEC. You can only get 27.2k if that's the rating plug on the FADEC, no mater how far forward you push the throttle (assuming Normal mode - all bets off in Alternate mode).
Read the thread...
There is a max rating based on what rating plug is installed on the FADEC. You can only get 27.2k if that's the rating plug on the FADEC, no mater how far forward you push the throttle (assuming Normal mode - all bets off in Alternate mode).
Read the thread...
No, No, No.
There is a max rating based on what rating plug is installed on the FADEC. You can only get 27.2k if that's the rating plug on the FADEC, no mater how far forward you push the throttle (assuming Normal mode - all bets off in Alternate mode).
Read the thread...
There is a max rating based on what rating plug is installed on the FADEC. You can only get 27.2k if that's the rating plug on the FADEC, no mater how far forward you push the throttle (assuming Normal mode - all bets off in Alternate mode).
Read the thread...
27.3k thrust will occur when the thrust levers are moved to the maximum TRA of 82 degrees.(the full forward position)