Braking deceleration of Airbus A320
Thread Starter
Join Date: Jun 2019
Location: Malta
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Braking deceleration of Airbus A320
Hi, I have an assignment in which I need to find the time and distance it takes for an A320 to brake from 30 knots to a full stop.
To do so I need to know the braking deceleration during taxi.
I have only been able to find the deceleration values for autobrake i.e.
LO - 2m/s2
MED - 3m/s2
MAX - 6m/s2
Am I right to say that autobrakes are off during taxi? What are the deceleration values of manual braking during taxi?
Thanks in advance.
To do so I need to know the braking deceleration during taxi.
I have only been able to find the deceleration values for autobrake i.e.
LO - 2m/s2
MED - 3m/s2
MAX - 6m/s2
Am I right to say that autobrakes are off during taxi? What are the deceleration values of manual braking during taxi?
Thanks in advance.
Moderator
We'll leave this query here for the time being. If it doesn't get much in the way of useful responses, we might look at moving it to Questions.
A difficult question as, for maximum braking, you would put everyone through the next seatback and for the range from nil to max braking is pretty broad.
Possibly you might do better with your assignment running the sums for the autobrake settings and qualifying your answers by reference to those values as examples within the available range. The other problem with the question is that, while the autobrake generally is set up to maintain a constant decel until the aircraft is stopped, the human pilot will modulate brake pressure throughout the stop with an associated varying decel.
A difficult question as, for maximum braking, you would put everyone through the next seatback and for the range from nil to max braking is pretty broad.
Possibly you might do better with your assignment running the sums for the autobrake settings and qualifying your answers by reference to those values as examples within the available range. The other problem with the question is that, while the autobrake generally is set up to maintain a constant decel until the aircraft is stopped, the human pilot will modulate brake pressure throughout the stop with an associated varying decel.
Join Date: Mar 2000
Location: Sunrise Senior Living
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
Something of a strange assignment iat!!
Taxying out - after a certain stage Autobrake MAX will be selected for the RTO case but it is not available until 72kts IRS GS.
Taxying in - the PF will have disconnected Autobrake in order to be able to taxi in - otherwise it will bring you to a halt on the RW!!
I am not aware of how you would calculate the decel rate from 30kts to a standstill with max manual braking in an A320. Experience tells me that it would be almost instantaneous as JT suggests. - an unpopular move!!
I would be interested to know the context of the task you have been set.
Cheers
Mcdhu
Taxying out - after a certain stage Autobrake MAX will be selected for the RTO case but it is not available until 72kts IRS GS.
Taxying in - the PF will have disconnected Autobrake in order to be able to taxi in - otherwise it will bring you to a halt on the RW!!
I am not aware of how you would calculate the decel rate from 30kts to a standstill with max manual braking in an A320. Experience tells me that it would be almost instantaneous as JT suggests. - an unpopular move!!
I would be interested to know the context of the task you have been set.
Cheers
Mcdhu
Autobrakes are used for stopping at high speeds. At 30kts it would be down to the pressure being manually put on the brakes pedals by the pilot and I personally try to be smooth and not excessive. Obviously if you were trying to avoid a collision you would use full braking.Below 20kt the antiskid is deactivated.
Last edited by tubby linton; 15th Jun 2019 at 19:47.
I guess it will also be contingent of the load of the plane and the tarmac conditions. I don't think you will get antiskid active at such low speed and in any case it will be a fairly quick stop...
As others have mentioned more context would be interesting.
As others have mentioned more context would be interesting.
Only half a speed-brake
Yes, the auto brakes are off during taxi. Otherwise, they would be constantly slowing down the A/C, negating the objective of taxying.
Towards the end of the landing roll, the ABRK would be disengaged by the pilot at low speed, in order to prevent a locked wheel situation once the anti-skid (a.k.a ABS) deactivates (technical low-speed threshold for that). Actually 30 knots is about the right moment, after which you'd assume normal pedal braking.
The answer to your question is pretty useless: the distance depends on how hard you press on the brake pedals, and what is the surface friction available. If I pressed the pedals to the metal, the brakes lock giving max effectiveness on a dry surface, and we'd skid to a stop inside 30 meters. Possibly even sooner - and trash all the 4 tyres.
Towards the end of the landing roll, the ABRK would be disengaged by the pilot at low speed, in order to prevent a locked wheel situation once the anti-skid (a.k.a ABS) deactivates (technical low-speed threshold for that). Actually 30 knots is about the right moment, after which you'd assume normal pedal braking.
The answer to your question is pretty useless: the distance depends on how hard you press on the brake pedals, and what is the surface friction available. If I pressed the pedals to the metal, the brakes lock giving max effectiveness on a dry surface, and we'd skid to a stop inside 30 meters. Possibly even sooner - and trash all the 4 tyres.
Hi, I have an assignment in which I need to find the time and distance it takes for an A320 to brake from 30 knots to a full stop.
To do so I need to know the braking deceleration during taxi.
I have only been able to find the deceleration values for autobrake i.e.
LO - 2m/s2
MED - 3m/s2
MAX - 6m/s2
Am I right to say that autobrakes are off during taxi? What are the deceleration values of manual braking during taxi?
Thanks in advance.
To do so I need to know the braking deceleration during taxi.
I have only been able to find the deceleration values for autobrake i.e.
LO - 2m/s2
MED - 3m/s2
MAX - 6m/s2
Am I right to say that autobrakes are off during taxi? What are the deceleration values of manual braking during taxi?
Thanks in advance.
Some other pointers/ corrections /additions to above. (Caveat these are A319 figures but all should be the same).
The MAX decelerations setting commands 6m/^2 deceleration rate but wont actually achieve this as it’s greater than what’s the aircraft can do. (The anti skid on the day will determine deceleration rate)
Low starts after 4 seconds after ground spoiler extension. The rate is 1.7m/s^2
MED after 2 seconds @3m/2^2.
There is an option available now to reduce the time delay on LOW to 2 sec.
none of this is relevant for taxi but it might help you refine your question if you need.
The MAX decelerations setting commands 6m/^2 deceleration rate but wont actually achieve this as it’s greater than what’s the aircraft can do. (The anti skid on the day will determine deceleration rate)
Low starts after 4 seconds after ground spoiler extension. The rate is 1.7m/s^2
MED after 2 seconds @3m/2^2.
There is an option available now to reduce the time delay on LOW to 2 sec.
none of this is relevant for taxi but it might help you refine your question if you need.
Only half a speed-brake
+10 And if the professor gives you A on that one, you know you chose the school right! https://www.albany.edu/faculty/miesi...sess/hell.html
iat, which course is being taken?
If a soft science, logic, then ask Airbus.
If a hard science, conduct a test and double integrate longitudinal deceleration. The latter being a technique used in fdr analysis to establish distance, or conversely braking action vs applied braking.
If a soft science, logic, then ask Airbus.
If a hard science, conduct a test and double integrate longitudinal deceleration. The latter being a technique used in fdr analysis to establish distance, or conversely braking action vs applied braking.
Join Date: Jan 2014
Location: N5109.2W10.5
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Hi, I have an assignment in which I need to find the time and distance it takes for an A320 to brake from 30 knots to a full stop.
At 6 m/sec/sec Ans = 19.8m, 2.6 secs etc.
Last edited by Goldenrivett; 16th Jun 2019 at 10:38. Reason: extra text
Hi, I have an assignment in which I need to find the time and distance it takes for an A320 to brake from 30 knots to a full stop.
To do so I need to know the braking deceleration during taxi.
I have only been able to find the deceleration values for autobrake i.e.
LO - 2m/s2
MED - 3m/s2
MAX - 6m/s2
Am I right to say that autobrakes are off during taxi? What are the deceleration values of manual braking during taxi?
Thanks in advance.
To do so I need to know the braking deceleration during taxi.
I have only been able to find the deceleration values for autobrake i.e.
LO - 2m/s2
MED - 3m/s2
MAX - 6m/s2
Am I right to say that autobrakes are off during taxi? What are the deceleration values of manual braking during taxi?
Thanks in advance.
Is this a basic physics unit which teaches you to calculate time and distance to decelerate to a standstill from a known velocity given a known acceleration?
Or is it a unit which teaches you to track down typical performance parameters such as the likely deceleration of an A320 at taxiing speeds?
Or is it perhaps intended simply to get you to calculate an estimate (with no fixed "correct answer") to make sure that you thoroughly grasp and remember how much space is required to stop?
Once you've answered this, you can then set about providing the type of answer required.
Join Date: Jun 2019
Location: South east
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Actually you can Arm Max inflight but depends on MSN. Earlier ones certainly could as a colleague did arm it by mistake and it stopped very quickly. Certainly later MSNs don’t let you Arm it.
Join Date: Apr 2011
Location: Not in Honduras
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Join Date: Jun 2019
Location: South east
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
No, on the old MSN a/c and indeed older sims, you can arm MAX just like MED in flight.. This is what my colleague did, He thought he was selecting MED during brief in flt but accidentally selected MAX. A/c stopped very quickly. In sim (old one) you can still do that - i train trainers and highlight the problem and tell them to check when trainee arms autobrake - of course it depends on which airline they are going to and which a/c they have as to whether to discuss it or not, but many a/c (usually the CRT ones) still let you.