NAV AIDS ident in glass cockpit aircraft
Thread Starter
Join Date: Dec 2007
Location: Changi
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
NAV AIDS ident in glass cockpit aircraft
Hi guys,
I am curious on how the MMR and FMGS ident a nav aid (VOR/NDB) in a glass cockpit aircraft.
My Guess is that it is via the Morse code transmitted and with a built in decoder coupled with BITE test.
Can someone help to confirm the above?
I am curious on how the MMR and FMGS ident a nav aid (VOR/NDB) in a glass cockpit aircraft.
My Guess is that it is via the Morse code transmitted and with a built in decoder coupled with BITE test.
Can someone help to confirm the above?
Join Date: Aug 2015
Location: Around 22N 113E
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
It works the same way you listen to an ident. Listen, decode and announce.
MMR works similarly the same way. It has a matched database, listens, matches and displays.
MMR works similarly the same way. It has a matched database, listens, matches and displays.
I'm not sure the database bit is relevant - it'll display the ident based on the morse and nothing else - if the morse is wrong, then that's what is displayed, which is what you'd want, isn't it.
Thread Starter
Join Date: Dec 2007
Location: Changi
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys,
Thanks for the replies.
I am sure everybody has encountered a tuned NAVAID with the same frequency but wrong ident.
From what I have gathered, FMGS uses the database to compare and “display” the ident based on the “nearest” navaid in the database.
I am curious on finding out how the MMR TIT the navaid “correctly”. Sometimes, only the tunes frequency is displayed on the PFD and we will revert to voice ident.
Was wondering how MMR does the TIT on our behalf.
Cheers
Thanks for the replies.
I am sure everybody has encountered a tuned NAVAID with the same frequency but wrong ident.
From what I have gathered, FMGS uses the database to compare and “display” the ident based on the “nearest” navaid in the database.
I am curious on finding out how the MMR TIT the navaid “correctly”. Sometimes, only the tunes frequency is displayed on the PFD and we will revert to voice ident.
Was wondering how MMR does the TIT on our behalf.
Cheers
Join Date: May 2000
Location: Seattle
Posts: 3,195
Likes: 0
Received 0 Likes
on
0 Posts
From the 744 FCOM:
The Morse code identifier of a tuned VOR, ILS, or ADF can be converted to alpha characters. The decoded identifier displays on the PFD and ND. Monitoring this identifier ensures correct navigation radio reception. The identifier name is not compared with the FMC data base.
Due to the large variation in ground station identifier quality, the decode feature may incorrectly convert the intended identifier name. Examples: the Hong Kong localizer “KL” may show as “KAI”, or the Boeing Field ILS may show as “QBFI” or “TTTT” instead of “IBFI.”
Due to the large variation in ground station identifier quality, the decode feature may incorrectly convert the intended identifier name. Examples: the Hong Kong localizer “KL” may show as “KAI”, or the Boeing Field ILS may show as “QBFI” or “TTTT” instead of “IBFI.”
The FMGS (Airbus) will auto tune the next VOR/NAVAIDs it thinks will be useful, and it gets the frequency from its database.
Then, as others have said, it idents the navaid by listening to the Morse code, and displays the result. If reception is poor, the NAVAID ident might be incorrect - for example BNM instead of BNN.
We usually know which VOR(s) will be auto-tuned next and therefore notice the correct frequency appearing, but the ident is sometimes wrong. When we listen ourselves to check, this is usually due to distortion or low level of audio signal.
Then, as others have said, it idents the navaid by listening to the Morse code, and displays the result. If reception is poor, the NAVAID ident might be incorrect - for example BNM instead of BNN.
We usually know which VOR(s) will be auto-tuned next and therefore notice the correct frequency appearing, but the ident is sometimes wrong. When we listen ourselves to check, this is usually due to distortion or low level of audio signal.
Join Date: Apr 2008
Location: Nearer home than before!
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
.. -- -. --- - ...- --- - .... . .-. ..- ...- . -.-. .. -.-. .- -. ..- --- .. - -- -.-- ... .-.. ..-.!
Sorry, some old git like me had to say it. I often find I can just push the button and get a good ident before the automatics do it. So I do. Happy New Year everyone. Especially those that actually touch the controls and keep their skills up once in a while!
Sorry, some old git like me had to say it. I often find I can just push the button and get a good ident before the automatics do it. So I do. Happy New Year everyone. Especially those that actually touch the controls and keep their skills up once in a while!