B747 Taxi & Turning Operations
Thread Starter
Join Date: Jun 2013
Location: Or-E-Gun, USA
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
B747 Taxi & Turning Operations
Some details and guidance from those who know, please...
Given: Most low speed 747 (1-2-3-4-8?) directional control is provided by tiller orders to the nose gear. Limited nose wheel control is available via the rudder pedals, but I understand that this is limited to about 6-7 degrees and is really intended for brief periods of increasing rudder control while accelerating for TO.
I've just learned that the 747, at least in some editions, provides some degree of BLG steering control, assumed to be similar to the counter steering often seen on extremely long urban fire apparatus, to enable negotiating tight turns in confined spaces. My questions about the 747's BLG steering include:
1. Is this automatic, or under manual control of the taxiing pilot?
2. Do I have it right, in that this is actually a counter-steering function, either holding the wheels straight or turning them 'counter' to the intended direction of the turn?
3. How many degrees of deflection are available?
4. --- In actual practice, how does it really work? Do pilots like it, dislike it, or simply never think about it?
5. Is this feature common to all B747 editions or perhaps an (extra cost) option? Perhaps it is a feature that has changed its stripes over the years?
6. Whatever you know and can share is greatly appreciated. Thank you!
Ah yes... Of course, once more question! Can the 747's BLG offset be used during extreme cross-wind landings(*), or is it limited to ground taxi functions only?
(*) In past generations, a few VLA have had a MLG offset function available for cross-wind landings. The C-5 and B-52 instantly come to mind, but there may be others. As I recall, the feature was quickly disabled on the C-5 and then eliminated from the design of future generations. For the apparently everlasting B-52, now flown by the grand and great-grand children of its designers, I have no clue. (It sort of sounds like a crazy idea, but for an airframe with floppy wing spread of the B-52, perhaps it is necessary. Again, I have no clue. If you know, beyond the B747, do any other Very Large civil aircraft offer this feature?
Thanks, boys and girls. Any details, leads/links or insight are greatly appreciated.
Given: Most low speed 747 (1-2-3-4-8?) directional control is provided by tiller orders to the nose gear. Limited nose wheel control is available via the rudder pedals, but I understand that this is limited to about 6-7 degrees and is really intended for brief periods of increasing rudder control while accelerating for TO.
I've just learned that the 747, at least in some editions, provides some degree of BLG steering control, assumed to be similar to the counter steering often seen on extremely long urban fire apparatus, to enable negotiating tight turns in confined spaces. My questions about the 747's BLG steering include:
1. Is this automatic, or under manual control of the taxiing pilot?
2. Do I have it right, in that this is actually a counter-steering function, either holding the wheels straight or turning them 'counter' to the intended direction of the turn?
3. How many degrees of deflection are available?
4. --- In actual practice, how does it really work? Do pilots like it, dislike it, or simply never think about it?
5. Is this feature common to all B747 editions or perhaps an (extra cost) option? Perhaps it is a feature that has changed its stripes over the years?
6. Whatever you know and can share is greatly appreciated. Thank you!
Ah yes... Of course, once more question! Can the 747's BLG offset be used during extreme cross-wind landings(*), or is it limited to ground taxi functions only?
(*) In past generations, a few VLA have had a MLG offset function available for cross-wind landings. The C-5 and B-52 instantly come to mind, but there may be others. As I recall, the feature was quickly disabled on the C-5 and then eliminated from the design of future generations. For the apparently everlasting B-52, now flown by the grand and great-grand children of its designers, I have no clue. (It sort of sounds like a crazy idea, but for an airframe with floppy wing spread of the B-52, perhaps it is necessary. Again, I have no clue. If you know, beyond the B747, do any other Very Large civil aircraft offer this feature?
Thanks, boys and girls. Any details, leads/links or insight are greatly appreciated.
I believe it's all automatics on the 747, it was different on the C-5. We had to select CASTER at each turn, switch on the pedestal, and it took the hydraulic lock off the aft gear allowing it to free caster when the nose wheel steering was cranked in. The pilot then selected CENTER coming out of the turn to hydraulically center the aft gear. The crosswind gear was always available on the A models, but was converted to the B model gear in the early '90s. The gear was different in the details and much simpler and more reliable.
Some form of aft gear steering is necessary on any long bodied plane, the 777 has it on the aft most gear.
The B-52 needs the crosswind gear because of its tandem body gear works, four gear, two forward, two aft.
Some form of aft gear steering is necessary on any long bodied plane, the 777 has it on the aft most gear.
The B-52 needs the crosswind gear because of its tandem body gear works, four gear, two forward, two aft.
Last edited by galaxy flyer; 20th Apr 2015 at 03:43.
1/ The 747’s Body Gear Steering system is automatic and starts to operate when the nose gear is turned more than 21 degrees. The 747-100/200/300 had an OFF – ARM switch. The 747-400 was entirely automatic (no switch).
2/ Yes it counter steered to reduce tire scrubbing and improve the turning radius.
3 / It could steer up to 13 degrees.
4/ I am not a pilot so can’t offer any operating experience but I think it was a system that worked in the background and no-one thought about it until it malfunctioned which was very rare.
5/ It was standard on all 747 models (not 100% sure about the SP).
6/ It could not be used for xwinds. It had to turned off for takeoff and only turned on after landing (automatic on the 747-400). It was connected to the TO Config warning system so the horn would sound if both body gears were not centered and locked when applying TO thrust.
9/ As for other aircraft the 777 steers the rear axle. I think the A380 steers the rear axle on the body gear. If you go back in time the DC8 allowed the rear axle on the inside of the turn to unlock and caster to improve turning radius. This was deleted on the DC8-62/63. I think some of the large Russian aircraft (AN124?) can steer main landing gears but know nothing about them.
2/ Yes it counter steered to reduce tire scrubbing and improve the turning radius.
3 / It could steer up to 13 degrees.
4/ I am not a pilot so can’t offer any operating experience but I think it was a system that worked in the background and no-one thought about it until it malfunctioned which was very rare.
5/ It was standard on all 747 models (not 100% sure about the SP).
6/ It could not be used for xwinds. It had to turned off for takeoff and only turned on after landing (automatic on the 747-400). It was connected to the TO Config warning system so the horn would sound if both body gears were not centered and locked when applying TO thrust.
9/ As for other aircraft the 777 steers the rear axle. I think the A380 steers the rear axle on the body gear. If you go back in time the DC8 allowed the rear axle on the inside of the turn to unlock and caster to improve turning radius. This was deleted on the DC8-62/63. I think some of the large Russian aircraft (AN124?) can steer main landing gears but know nothing about them.
Last edited by CV880; 20th Apr 2015 at 02:11.
Join Date: Apr 2008
Location: nowhere
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Remember, only the body gear has steering, not the wing gear so you could never set it up in the same way as the B-52 even if there was a way to activate it from the cockpit for landing(which there is not).
http://cdn-www.airliners.net/uf/1137...phpJa7h1s.jpeg
Going from memory, as the tiller moves beyond 20 degrees of nosewheel steering, the body gear for the -400 starts to turn in the opposite direction to a maximum of 13 degrees presumably at max nosewheel steering angle(although that is just a guess). But, this is only at slower speeds. It is disabled once accelerating through 20 knots and enabled when decelerating through 15 knots so it is for low speed operation only.
I'd say in general that you never really think about it. Until it is MEL'd as inoperative that is. That being said I did see one pilot work his way through a 120 degree turn onto the parallel taxiway from the high speed exit in this condition so normal ops really are not affected but turning radius for close-in ops should be considered.
Non-centered body gear will cause damage if retracted. Therefore, there is a takeoff warning if it is not centered when power is advanced for takeoff. So prior to adding a bunch of thrust for takeoff it is best to make sure the tiller is centered to avoid a false warning. I believe the gear lever will not move to the Up position if the body gear is not centered(or if it is not tilted) and therefore the override function should not be used until it is verified why the handle will not move to Up(such as an EICAS message).
http://cdn-www.airliners.net/uf/1137...phpJa7h1s.jpeg
Going from memory, as the tiller moves beyond 20 degrees of nosewheel steering, the body gear for the -400 starts to turn in the opposite direction to a maximum of 13 degrees presumably at max nosewheel steering angle(although that is just a guess). But, this is only at slower speeds. It is disabled once accelerating through 20 knots and enabled when decelerating through 15 knots so it is for low speed operation only.
I'd say in general that you never really think about it. Until it is MEL'd as inoperative that is. That being said I did see one pilot work his way through a 120 degree turn onto the parallel taxiway from the high speed exit in this condition so normal ops really are not affected but turning radius for close-in ops should be considered.
Non-centered body gear will cause damage if retracted. Therefore, there is a takeoff warning if it is not centered when power is advanced for takeoff. So prior to adding a bunch of thrust for takeoff it is best to make sure the tiller is centered to avoid a false warning. I believe the gear lever will not move to the Up position if the body gear is not centered(or if it is not tilted) and therefore the override function should not be used until it is verified why the handle will not move to Up(such as an EICAS message).
Last edited by JammedStab; 26th Apr 2015 at 13:27.
Thread Starter
Join Date: Jun 2013
Location: Or-E-Gun, USA
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Mega Thanks!
@Galaxy, CV880, Jammed et al possibly pending: Hot damn and thank you. Between the three of you, I understand what I wanted to understand. As a relatively minor sub-system, rarely given much thought, I can just picture some of the head-scratching that may occur if/when the BLG steering is MEL'd- (if that is a MEL item) and when landing/taxiing on some less than perfect airfields. (For some, I'm thinking this may be a good opportunity to pull off then sit and wait for a two to the gate/stand.) Thanks guys. Much appreciated.
Addendum/Edit: Special thanks to @Jammed for the picture. It illustrates the subject perfectly and clarifies my meaning, even if my words were imperfect. Thank you.
Addendum/Edit: Special thanks to @Jammed for the picture. It illustrates the subject perfectly and clarifies my meaning, even if my words were imperfect. Thank you.
Last edited by No Fly Zone; 20th Apr 2015 at 03:03. Reason: Addendum of thanks
Join Date: Oct 2003
Location: Tickawarra
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
The airline I flew classic B747,s for had a policy not to use the body gear steering while taxing on very slippery taxiways { ice covered, snow etc}. When the -400 was introduced the policy was dropped because the system had become automated.
Join Date: Apr 2006
Location: Krug departure, Merlot transition
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
One thing I have noticed when taxiing the B747 with the Body Gear Steering inoperative is that you have to "overshoot" your intended line of direction during turns far more (ie go much deeper into turns); it feels like taxiing a much longer aircraft all of a sudden.
Another piece of outstanding engineering on the most beautifully designed aircraft I have had the fortune to fly.
Another piece of outstanding engineering on the most beautifully designed aircraft I have had the fortune to fly.
Join Date: Sep 2003
Location: Sand pit
Age: 54
Posts: 460
Likes: 0
Received 0 Likes
on
0 Posts
The MD-11 and the 777, especially the 300 require a fair amount of over-steering( as do many other others like A-340), so when I had a chance to fly the 747 for a short time it was unnatural being in such a big airplane that basically needed little or no over steering .....worked beautifully!
Join Date: Feb 2004
Location: Australia
Posts: 1,307
Likes: 0
Received 0 Likes
on
0 Posts
It is disabled once accelerating through 20 knots and enabled when decelerating through 15 knots so it is for low speed operation only.
The system will still work with the IRUs switched off.
Join Date: Apr 2008
Location: nowhere
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Thanks NSEU. Any explanation for the reason why you hear and feel a creaking or vibrating noise when the tiller has been moved to a significant angle while taxiing. As soon as you back off the tiller, it seems to go away. You can hear it in the flight deck and the lower deck. Sometimes as a passenger I have heard a cable movement kind of noise as well on the lower deck.
The other day we were lined up on the runway for a while and there was a similar noise. One guy said that it was possibly the body gear trying to straighten out. We were at max weight.
The other day we were lined up on the runway for a while and there was a similar noise. One guy said that it was possibly the body gear trying to straighten out. We were at max weight.
JammedStab,
From my experience that noise you're hearing in the flightdeck and on the maindeck below could be a dried out nose gear steering collar "groaning" during turns. Engineers tell me they usually give the collar a good lube and problem noise disappears. Also, one would think that sitting in the flightdeck with engines running, you would be too far away from the body gears to hear any noise emanating from them unless maybe a severe structural failure that I would guess you would feel through the airframe as well.
From my experience that noise you're hearing in the flightdeck and on the maindeck below could be a dried out nose gear steering collar "groaning" during turns. Engineers tell me they usually give the collar a good lube and problem noise disappears. Also, one would think that sitting in the flightdeck with engines running, you would be too far away from the body gears to hear any noise emanating from them unless maybe a severe structural failure that I would guess you would feel through the airframe as well.
Join Date: Sep 2010
Location: earth
Posts: 1,341
Likes: 0
Received 0 Likes
on
0 Posts
My first taxi experience was in the 742 after a few years of maintaining the body gear steering system an alot of time pushing back and towing , it was an absolute pleasure. A little thrust on the O/B engine, that nose will go 90 deg in a tight turn with the body gear to follow up.
The MD11 takes a bit more planning, the nose wheel only turns somewhere around 80 somewhat deg, speed is more critical as the opposing wheel comes off the ground due to the raked gear, I scrubbed many tires. First time getting used to the "ass in the Grass" is a bit of a challenge. None the less like anything else, it was easy after a bit of practice.
The MD11 takes a bit more planning, the nose wheel only turns somewhere around 80 somewhat deg, speed is more critical as the opposing wheel comes off the ground due to the raked gear, I scrubbed many tires. First time getting used to the "ass in the Grass" is a bit of a challenge. None the less like anything else, it was easy after a bit of practice.
Join Date: May 2004
Location: prime meridian
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Body Gear Steering on the 747
The Body Gear Steering is automatic on the 747-400, it gets enabled/ disabled around 20kts. And yes, it steers in the opposite direction being on the opposite side of the center point of the turn as compared to the nose wheel. Imagine if you steered right in a car and your rear wheels turned (swiveled) right, the front of your car would probably turn left!
The -200/300 had a guarded toggle switch which the pilot flying would typically reach out and enable/disable before the RWY exit/before takeoff.
I have been observer on a 747-200 when a rolling take off went awry because the Captain rushed the take off and flipped the Body Gear Steering toggle switch while the body gear was not yet neutral/centered. We lost traction on a just about wet RWY and thanks to providence, rotated to safety before reaching the RWY shoulder!
I feel distinctly uncomfortable if the Body Gear Steering is not available. It is probably one of the major reasons why the 747 is a great airplane to taxi. The 777 and 787 do not compare in the feelgood, feel comfortable sweepstakes, and I have extensive experience on all 3 types.
SO, to pique your interest in things similar, @No_Fly_Zone, the 777-300ER have something called "Semi-Levered-Gear" - go figure ...
The -200/300 had a guarded toggle switch which the pilot flying would typically reach out and enable/disable before the RWY exit/before takeoff.
I have been observer on a 747-200 when a rolling take off went awry because the Captain rushed the take off and flipped the Body Gear Steering toggle switch while the body gear was not yet neutral/centered. We lost traction on a just about wet RWY and thanks to providence, rotated to safety before reaching the RWY shoulder!
I feel distinctly uncomfortable if the Body Gear Steering is not available. It is probably one of the major reasons why the 747 is a great airplane to taxi. The 777 and 787 do not compare in the feelgood, feel comfortable sweepstakes, and I have extensive experience on all 3 types.
SO, to pique your interest in things similar, @No_Fly_Zone, the 777-300ER have something called "Semi-Levered-Gear" - go figure ...
Thread Starter
Join Date: Jun 2013
Location: Or-E-Gun, USA
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Plus
@capinsan, thanks for the FU response. Much like I've already heard, but 'more better.' Of course I will look into the triple-7's steering the the other two or three that are considered Very Long Airplanes. Got it, but of course I'm wondering about the others. From the A380 down to the C150, if the pilots (alone) cannot taxi it, what good is it? Thanks.
I've spent a fair amount of my Boeing career working various models of the 747, but being an engine guy I didn't even know the 747 had body gear steering until I read this thread.
A little over a week ago I was out at the flight line for some 747-8 testing, so during some down time I decided to check out the gear steering. HOLY COW , those are some big actuators!
Good to hear that the system works well .
A little over a week ago I was out at the flight line for some 747-8 testing, so during some down time I decided to check out the gear steering. HOLY COW , those are some big actuators!
Good to hear that the system works well .
Join Date: Apr 2008
Location: nowhere
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
JammedStab,
From my experience that noise you're hearing in the flightdeck and on the maindeck below could be a dried out nose gear steering collar "groaning" during turns. Engineers tell me they usually give the collar a good lube and problem noise disappears. Also, one would think that sitting in the flightdeck with engines running, you would be too far away from the body gears to hear any noise emanating from them unless maybe a severe structural failure that I would guess you would feel through the airframe as well.
From my experience that noise you're hearing in the flightdeck and on the maindeck below could be a dried out nose gear steering collar "groaning" during turns. Engineers tell me they usually give the collar a good lube and problem noise disappears. Also, one would think that sitting in the flightdeck with engines running, you would be too far away from the body gears to hear any noise emanating from them unless maybe a severe structural failure that I would guess you would feel through the airframe as well.
The other day we had the body gear steering inop. In this case, the taxiing it was only a slight bit more difficult for the turn even shallow 90 degree turns but when a sharp 90 degree turn was made, a lot of that creaking noise was heard(more than normal) and was felt through the tiller.
Nose and body gear both on the same hydraulic system.
SkyGod
Join Date: Aug 2000
Location: Palm Coast, Florida, USA
Age: 67
Posts: 1,542
Likes: 0
Received 10 Likes
on
1 Post
. .
Another piece of outstanding engineering on the most beautifully designed aircraft I have had the fortune to fly.
Another piece of outstanding engineering on the most beautifully designed aircraft I have had the fortune to fly.
15 years of my life was spent on the classic 747 flying for 4 different firms and I enjoyed it all.
I feel fortunate as well.
A great aeroplane with no handing vices at all - as opposed to some earlier jet types I have flown. The only thing one had to take care over was not to taxi to fast round tight corners on wet surfaces. In these conditions the nose wheel adhesion was a little limited and would scrub. So long as one entered the turn really slowly there was no problem.