Go Back  PPRuNe Forums > Flight Deck Forums > Tech Log
Reload this Page >

UPS cargo crash near Birmingham AL

Tech Log The very best in practical technical discussion on the web

UPS cargo crash near Birmingham AL

Old 20th Feb 2014, 18:22
  #1001 (permalink)  
 
Join Date: Jun 2001
Location: Rockytop, Tennessee, USA
Posts: 5,898
Likes: 0
Received 1 Like on 1 Post
Looks like they never correctly sequenced the approach in the box, were playing catch up from above with a late descent and V/S ed down through the path into the ground. They weren't stable at 1000 feet and did not go missed approach as required by the procedures. The callouts at 500 feet and minimums weren't made.

I'm thinking they are going to hang the dispatcher for believing that the LOC 18 procedure was not allowed at night and not telling the crew. He implies that he didn't want to insult the crew's professionalism by telling them about it.

There are rumors, I stress rumors, of significant prior crew training issues, if so, I'm sure this will come out in the NTSB report.
The captain tried to upgrade from first officer twice unsuccessfully in 2002 before finally making it on the third try in 2009. He also somehow failed homestudy training three times in 1991 and 1992 and failed recurrent FO sim training in 2007. He failed his CFI ride in 1985. This would be unusual for most of the pilot group in my experience.

I wonder if the NTSB will harvest the chitchat about the company, the union, howya feelin', I'm tired, ready to go to the hotel, etc. from the CVR? They got a lot of what would previously be considered 'non-pertinent conversation' from the BUF Colgan 3407 crash.
There is definitely some CVR commentary on fatigue and the cargo cutout in the Part 117 rest regs.
Airbubba is offline  
Old 20th Feb 2014, 19:14
  #1002 (permalink)  
 
Join Date: Mar 2007
Location: Here and there
Posts: 2,781
Likes: 0
Received 1 Like on 1 Post
The big question to be asked is that 1000ft QNH or QFE to which they are referring?. The airport is 650 ft amsl. Crew co-ordination and monitoring seems to have completely broken down as the sop calls are not made and pnf does nothing to catch this error. At the end of another long night the urge to put the aircraft on the ground is very strong and was this the crew's primary motivation.. The FAA is negligent for not including cargo airlines in their new FTL and the crew discuss this before departure. An aircraft when it crashes doesn't know if it contains bodies or boxes.
tubby linton is offline  
Old 20th Feb 2014, 20:11
  #1003 (permalink)  
 
Join Date: Jun 2001
Location: Rockytop, Tennessee, USA
Posts: 5,898
Likes: 0
Received 1 Like on 1 Post
The big question to be asked is that 1000ft QNH or QFE to which they are referring?.
It's 1000 feet AGL (QFE if you prefer), this 'no flags' callout has been done in the U.S. since at least the 1960's from archived NTSB reports.

The FAA is negligent for not including cargo airlines in their new FTL and the crew discuss this before departure. An aircraft when it crashes doesn't know if it contains bodies or boxes.
Similarly, under the 'no significant loss of life' principle, the fatal UPS BHM widebody crash doesn't even make the Freight Dog forum here on PPRuNe. It is on Tech Log.
Airbubba is offline  
Old 21st Feb 2014, 07:37
  #1004 (permalink)  
BRE
 
Join Date: Mar 2007
Location: Europe
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts
http://dms.ntsb.gov/public%2F55000-5...7%2F550138.pdf

- the interior of the cockpit was largely intact
- the floor below the seats had moved up a few inches
- the seats were tilted slighly forward but apparently stayed attached throughout the crash (the CPT's seat and the F/O's seat back were found outside of the cockpit by NTSB consistent with extrication efforts by the firefighters)
- the firefighters saw the lifeless pilots inside the cockpit but could not enter until fires / explosions were brought under control
- by the time they did, the pilots were dead
- the pilots died by blunt force impacts to heads and torsos
- they were wearing full harnesses at the time of impact

So we have a cockpit and seats with almost fully preserved structural integrity (something that would not happen in a similar speed car crash) plus we have a much better restraint system than in a car. So did they hit the instrument panel (unlikely with a should harness) or did some panels come down on them (the report does not say)?

Last edited by BRE; 21st Feb 2014 at 07:55.
BRE is offline  
Old 21st Feb 2014, 14:40
  #1005 (permalink)  
 
Join Date: Feb 2000
Location: Alaska, PNG, etc.
Age: 60
Posts: 1,550
Likes: 0
Received 0 Likes on 0 Posts
Blunt Force Trauma doesn't necessarily mean that something hit them. It just means that the force was not a penetrating force. Force applied by the seats and harnesses would be "blunt force". It is entirely possible for fatal injuries to be sustained that way. One specific way is through a torn aorta resulting from acceleration forces on the heart.
A Squared is offline  
Old 21st Feb 2014, 14:54
  #1006 (permalink)  
 
Join Date: Aug 2009
Location: Texas
Age: 64
Posts: 7,131
Received 318 Likes on 204 Posts
For those interested:

Discussion of CVR transcript is here.

CVR transcript link is here
Lonewolf_50 is online now  
Old 21st Feb 2014, 18:52
  #1007 (permalink)  
 
Join Date: Aug 2013
Location: South Alabama
Age: 74
Posts: 339
Likes: 0
Received 1 Like on 1 Post
@Lonewolfe_50

Here is a link (if it works) to the NTSB docket regarding the PAPI's not being certified for aircraft with height 4 (Airbus 300).

http://dms.ntsb.gov/public%2F55000-5...7%2F549056.pdf

Runway 18 PAPI is certified for height group 3.

It is document number 48 on the docket.
Old Boeing Driver is offline  
Old 22nd Feb 2014, 03:18
  #1008 (permalink)  
 
Join Date: May 2013
Location: Home, or teterboro, probably teterboro
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
@Old Boeing Driver

DA2000 corp pilot here. Interesting about the PAPI not being certified for a height 4 aircraft. I have never heard of this before. Digging around the interwebs produced a basic definition. So if I used a PAPI at JFK, assuming it has a PAPI for a height 4 aircraft, would that cause me to land past the TDP for my category?
SCSflIer is offline  
Old 24th Feb 2014, 14:27
  #1009 (permalink)  
 
Join Date: Aug 2009
Location: Texas
Age: 64
Posts: 7,131
Received 318 Likes on 204 Posts
Old OBeing, thanks, but that doesn't change its utility previous to threshold crossing.
Lonewolf_50 is online now  
Old 24th Feb 2014, 17:13
  #1010 (permalink)  
 
Join Date: Aug 2013
Location: Washington.
Age: 73
Posts: 1,070
Received 151 Likes on 53 Posts
PAPI "Issue" is Irrelevent

That the TCH was 47.7 ft, not 60-75 ft, which is the minimum for Height Group 4 (A300), is not relevant to this accident, considering the events, in my opinion.

Had the crew paid any attention to the PAPI, used its advisory vertical path information, the airplane would not have collided with the terrain. Even the beginning of "4 reds" would have kept them safely above the terrain.

The FO and the Captain missed both the 100 ft above and the Minimums calls, at which point the decision to continue or go-around should have been made. At Minimums, if they saw the runway, then the PAPI would already have shown 3 or 4 red lights. So a difference of 13-15 ft of TCH is a non-factor. (This is clear from Figure 9b of the Aircraft Performance Group Report.)

The aircraft crossed IMTOY almost exactly at the 1,380 ft altitude restriction, but at approximately 1,500 Ft/min, or twice the nominal value. Did this vertical rate create a non-normal tempo for the approach after the 1,000 ft (above touchdown) call and contribute to the crew's failure to anticipate reaching minimums?
GlobalNav is offline  
Old 24th Feb 2014, 18:47
  #1011 (permalink)  
PJ2
 
Join Date: Mar 2003
Location: BC
Age: 76
Posts: 2,484
Received 0 Likes on 0 Posts
GlobalNav;
That the TCH was 47.7 ft, not 60-75 ft, which is the minimum for Height Group 4 (A300), is not relevant to this accident, considering the events, in my opinion.
I agree.

I put together the following graphic, similar to mm43's but using G.E. The timings and the altitudes are from the original preliminary report and use a nominal 145kt groundspeed, and could be refined somewhat for IMTOY. The two important lines are the blue and green ones which are the MDA and 3.2° PAPI, respectively.

PJ2

PJ2 is offline  
Old 24th Feb 2014, 19:13
  #1012 (permalink)  
 
Join Date: Mar 2007
Location: Here and there
Posts: 2,781
Likes: 0
Received 1 Like on 1 Post
I would be interested to see a GE overlay of the FDR data. No mention was made of a QAR in the testimony and a modern FOQA programme can give a good representation of what happened.
MM43s graph doesn't tally with the FDR in many areas.
tubby linton is offline  
Old 24th Feb 2014, 19:14
  #1013 (permalink)  
 
Join Date: Dec 2002
Location: UK
Posts: 2,451
Likes: 0
Received 9 Likes on 5 Posts
PJ2 great diagram. How about the similarities with ‘incident 1’; not only the final flight path shape, but also the other contributions considered.
safetypee is offline  
Old 24th Feb 2014, 19:35
  #1014 (permalink)  
PJ2
 
Join Date: Mar 2003
Location: BC
Age: 76
Posts: 2,484
Received 0 Likes on 0 Posts
tubby linton;

The QAR would not likely have survived as it is usually mounted in the electronics bay underneath the cockpit, but I think I know what you meant and I'm in the process of examining the DFDR traces.

safetypee;
Thank you for the link to the "TAWS Saves..." document - very valuable piece of writing I think.

The accident is a classic "Incident 1" from that document, isn't it?, including as you say, all contributing factors.

If I understand TAWS correctly, the aircraft was not within the "TOO LOW TERRAIN" TAWS Boundary as described below.



PJ2
PJ2 is offline  
Old 24th Feb 2014, 19:50
  #1015 (permalink)  
 
Join Date: Mar 2007
Location: Here and there
Posts: 2,781
Likes: 0
Received 1 Like on 1 Post
We use pcmia cards for our QAR data capture. I do not know about their survivability but they look fairly durable. There did not appear to be a fire in the avionics bay so hopefully it would have survived if it had been fitted.
tubby linton is offline  
Old 24th Feb 2014, 21:21
  #1016 (permalink)  
PJ2
 
Join Date: Mar 2003
Location: BC
Age: 76
Posts: 2,484
Received 0 Likes on 0 Posts
T.L., yes, let's hope so - QARs usually have more parameters and sometimes to greater sample rates and resolutions than the legally-required parameters for FDRs. DFDAU systems are less sophisticated and usually the QAR is another port off the same FDAU that is sending aircraft/system data to the FDR. This aircraft had a separate QAR.
PJ2 is offline  
Old 27th Feb 2014, 00:55
  #1017 (permalink)  
 
Join Date: Sep 2011
Location: Mercer Island WA
Posts: 146
Likes: 0
Received 0 Likes on 0 Posts
In the end it is still RNP that's needed globally

All said and done, ...since at least AL371, AL736, AL737 and before, and through the period of TWA 514 and since, ....it is [real] RNP that is actually needed, to every jet runway. And since the 1990's, GLS/GBAS, which is vastly better than ILS, and significantly less expensive than ILS.
7478ti is offline  
Old 27th Feb 2014, 01:13
  #1018 (permalink)  
 
Join Date: Jun 2009
Location: NNW of Antipodes
Age: 81
Posts: 1,330
Received 0 Likes on 0 Posts
@ tubby linton

The graphic on page 3 of the other thread was originally put together in September last, and when looking at it in the light of the FDR data, the FP is somewhat in error. As someone has already pointed out to me in a PM, I probably transposed 1380 for 1830 when plotting the alt at IMTOY.

I'm currently having a look at the FDR .csv data file and extracting the relevant data to update the graphic.
mm43 is offline  
Old 27th Feb 2014, 02:13
  #1019 (permalink)  
 
Join Date: Aug 2013
Location: Washington.
Age: 73
Posts: 1,070
Received 151 Likes on 53 Posts
@mm43

NTSB has done a lot of the work for you in a very illustrative plot, Figure 9b of the Aircraft Performance Group Report. FWIW

URL for NTSB Aircraft Performance Group Report:
Document 42 ATC 3 - Attachment 1 - BAA - ATC Airport Emergency Operating Procedures Letter of Agreement Filing Date December 16, 2013 4 page(s) of Image (PDF or TIFF) 0 Photos

Last edited by GlobalNav; 27th Feb 2014 at 15:07.
GlobalNav is offline  
Old 27th Feb 2014, 16:00
  #1020 (permalink)  
PJ2
 
Join Date: Mar 2003
Location: BC
Age: 76
Posts: 2,484
Received 0 Likes on 0 Posts
GlobalNav;

Thank you for your suggestion and link - very helpful indeed. The issue in the flight data is the fact that the FDR stops at 04:47:33.5 while the CVR continues, (as per explanation in the CVR Group Report) until 04:47:41.7 CDT. Getting the timings synchronized, particularly the extrapolation after 47:33.5, was a bit of a challenge without further data. Up to this point I was using an average of 252fps to back-calculate the various distances from either the threshold or the EOR as was stated in the various reports, and wasn't aware of this excellent report.

The GoogleEarth presentation only makes it easier to visualize - my own was also done last September or so from the preliminary work and some guesswork, (crossing altitude at IMTOY for example), using a groundspeed that is typical, about 240fps.

I look forward to mm43's work - his was very helpful in the AF447 threads.
PJ2 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.