Go Back  PPRuNe Forums > Flight Deck Forums > Rumours & News
Reload this Page >

Wizz Air A321 CG was off the chart

Rumours & News Reporting Points that may affect our jobs or lives as professional pilots. Also, items that may be of interest to professional pilots.

Wizz Air A321 CG was off the chart

Old 8th Oct 2020, 19:14
  #1 (permalink)  
Thread Starter
 
Join Date: Mar 2006
Location: USA
Posts: 2,509
Likes: 0
Received 0 Likes on 0 Posts
Wizz Air A321 CG was off the chart

Report: Wizz UK A321 at London on Jan 16th 2020, late rotation on takeoff
Check Airman is offline  
Old 8th Oct 2020, 20:20
  #2 (permalink)  
 
Join Date: Aug 2016
Location: Europe
Posts: 704
Likes: 0
Received 0 Likes on 0 Posts
A Vr of 112 knots for a not fully loaded but well and by far not empty A321 should have rung a bell as early as at performance computation stage. The whole set of performance data was invalid.

Also, as people well acquainted with the matter say, Wizz air have a highly customised normal checklist which does not include an after takeoff checklist. Surely reading the standard Airbus checklist to the line after flaps retraction wouldn't have allowed them to climb to 5000 with the gear down?
PilotLZ is offline  
Old 8th Oct 2020, 20:51
  #3 (permalink)  
 
Join Date: Oct 2009
Location: UK
Posts: 1,058
Likes: 0
Received 0 Likes on 0 Posts
Does an after takeoff checklist appear on what Airbus actually produces? Genuine question. At my large A320 operator we don't have one.
giggitygiggity is offline  
Old 8th Oct 2020, 21:24
  #4 (permalink)  
 
Join Date: Aug 2016
Location: Europe
Posts: 704
Likes: 0
Received 0 Likes on 0 Posts
After takeoff/climb checklist:
Landing gear - up
Flaps - retracted
Packs - on
--------------------
Baro reference - STD set

That's the Airbus version of it, as far as I am aware. Everything else, including removing this section, is an airline-specific customisation. And that's the trap with deleting it - probably because whoever designed the SOP and checklist thought that raising the gear was too intuitive to forget.
PilotLZ is offline  
Old 8th Oct 2020, 21:52
  #5 (permalink)  
 
Join Date: Oct 2009
Location: Australia the Awesome
Posts: 399
Received 0 Likes on 0 Posts
320 to 321, always a trap

We have this situation a couple of times a month, and my first thought is always pax seating and underfloor loading. Followed by fuel required.

I always discuss the pax seating with the Cabin Manager and get them to check if it “looks ok” before we close the door. (Ie: pax distribution across all 3 zones.

My company has their own iPad based loading system, which is far from perfect and doesn’t populate any of the Airbus performance data.

So it is always a challenge, and requires extra vigilance for loading and operations.

That doesn’t stop these similar events from happening, but touch wood, I’ve managed it up to this point.

They were lucky this time, it could have been a lot worse.
Roj approved is offline  
Old 8th Oct 2020, 22:01
  #6 (permalink)  
 
Join Date: Dec 2008
Location: uk
Posts: 910
Likes: 0
Received 0 Likes on 0 Posts
Pretty sure there is no published after take off check list in the standard Airbus SOP. We used a customized one about 15 years ago, then ditched it to align more closely with the Airbus SOP. Seem to remember that the aircraft will warn you if you've left the packs off.
macdo is offline  
Old 9th Oct 2020, 00:52
  #7 (permalink)  
 
Join Date: Dec 2019
Location: SS Enterprise
Posts: 73
Received 0 Likes on 0 Posts
Airbus most definitely has an AFTER TAKE-OFF checklist. See Pilot LZ reply!

Airbus are currently revising many items of the normal SOP and I believe the AFTER TAKE-OFF checklist will be removed. These changes are delayed but due in the second half of next year.
Qwark is offline  
Old 9th Oct 2020, 05:13
  #8 (permalink)  
 
Join Date: Aug 2000
Posts: 1,499
Likes: 0
Received 0 Likes on 0 Posts
As far as I know, this is the new CL, due to be released late next year. No after takeoff checklist.
ManaAdaSystem is offline  
Old 9th Oct 2020, 05:23
  #9 (permalink)  
Thread Starter
 
Join Date: Mar 2006
Location: USA
Posts: 2,509
Likes: 0
Received 0 Likes on 0 Posts
Interesting. No more Autothrust on the landing checklist?
Check Airman is offline  
Old 9th Oct 2020, 05:50
  #10 (permalink)  
 
Join Date: Sep 2000
Location: The Back of Beyond
Posts: 149
Likes: 0
Received 0 Likes on 0 Posts
How does that old saying go?

You pay peanuts...
Flying Clog is offline  
Old 9th Oct 2020, 06:30
  #11 (permalink)  
 
Join Date: Jan 2008
Location: Reading, UK
Posts: 15,784
Received 196 Likes on 90 Posts
Apropos the above:

"Following the incident, the operator carried out an internal investigation. It identified safety actions it would take to prevent a reoccurrence, which were to:

... Improve Ground Handling Agents' awareness of the implications of a change in aircraft variant.

... Provide additional training for cabin crew on weight and balance distribution and its affects [sic]."
DaveReidUK is offline  
Old 9th Oct 2020, 06:46
  #12 (permalink)  
 
Join Date: Apr 2013
Location: Neither here or there
Posts: 314
Likes: 0
Received 0 Likes on 0 Posts
Macdo, TCX were operating a very slick and cut down Airbus SOP. Every other operator out there has an After TO and Approach checklist that is straight from the official Airbus books.
CW247 is offline  
Old 9th Oct 2020, 08:09
  #13 (permalink)  
 
Join Date: Mar 2000
Location: Sunrise Senior Living
Posts: 1,338
Likes: 0
Received 0 Likes on 0 Posts
Indeed, the low V1/Vr of 112kts should have rung alarm bells! I seen to remember from my A320 days at LTN that the Vmcg/Vmca was around 115kts, but surely the giveaway should have been the aircraft registration on the load sheet handed to the captain. Yes, a good SCM should have flagged the unusual distribution to the pilots, but no more than that. I'm afraid the fault lies firmly with the dispatcher and the pilots.
a narrow squeak!
mcdhu is offline  
Old 9th Oct 2020, 08:29
  #14 (permalink)  
 
Join Date: Mar 2012
Location: Having a margarita on the beach
Posts: 2,402
Likes: 0
Received 0 Likes on 0 Posts
Airbus has an after takeoff/climb checklist definitely since my initial type rating in 1993 and I honestly do not understand why any operator would want to skip such an important part of the checklist. L/G left down is highly common for many distractions occurring during takeoff, including EFTO slightly mismanaged with some sweating where, once the a/c is under control, the crew focusses on the EFP and forgets the gear.
Rotating an A321 with 157 pax at 112 kt means a very very low understanding of basic aerodynamics...
sonicbum is online now  
Old 9th Oct 2020, 08:32
  #15 (permalink)  
 
Join Date: Nov 2002
Location: United States
Posts: 1,051
Likes: 0
Received 0 Likes on 0 Posts
10000hrs on type. Never seen an after T/O check list nor is there one anywhere in the manuals that I can see (worlds largest Airbus single aisle operator)
Nil further is offline  
Old 9th Oct 2020, 08:49
  #16 (permalink)  
 
Join Date: Jul 2018
Location: on the edge.
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
?? well that sounds awkward to say the less
TheEdge is offline  
Old 9th Oct 2020, 09:00
  #17 (permalink)  
 
Join Date: Mar 2007
Location: Here and there
Posts: 2,781
Likes: 0
Received 1 Like on 1 Post
The manuals for your operator have had a huge amount of Airbus material removed from them, not all of which has made it into the OMB.
tubby linton is offline  
Old 9th Oct 2020, 09:12
  #18 (permalink)  
 
Join Date: Jul 2018
Location: on the edge.
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
PilotLZ

Cannot understand how this did happen...I mean you get a different aircraft, a 321 is different in everything in terms of ZFW, TOW, MLW; You have your FlySmart tool and Inflight performance application and do your loadsheet calculatioin, you insert your cargo and pax weights and distribution check the CG, the THS data, the TOW, the ZFW, double check with your colleague, insert in MCDU INIT page, then you do your TakeOff calculation, PERF page, then check again same distribution numbers with Ramp Agent, SCCM and so on and so forth.
Even if it was a manual calculation you would have immediately spotted the CG out of range.

Am i missing something ?

Last edited by TheEdge; 9th Oct 2020 at 09:34.
TheEdge is offline  
Old 9th Oct 2020, 09:35
  #19 (permalink)  
 
Join Date: Oct 2007
Location: Europe
Posts: 285
Likes: 0
Received 0 Likes on 0 Posts
I think two reasons could lead to this (stand to be corrected): misloading of aircraft by loading staff and flight crew complacency entering and crosschecking perf.data.
booze is offline  
Old 9th Oct 2020, 09:40
  #20 (permalink)  
 
Join Date: Mar 2007
Location: Here and there
Posts: 2,781
Likes: 0
Received 1 Like on 1 Post
Am i missing something ?

You are missing the fact that the loadsheet was generated external to the aircraft . I would imagine that it was probably just a print out on poor quality paper using a life expired print cartridge with no envelope depiction printed on it.
“When all the passengers have boarded, the Load and Trim Sheet is printed, and a copy is passed to the flight crew for them to complete their performance calculations.


tubby linton is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.