AS350B2 VEMD
 

Hi Everyone

If anyone on here currently flying a B2 with a VEMD? Got some techinal questions if you could please send me a PM.

Thanks

Welcome Aboard. Hope you enjoy this site.
I’ll bite. What’s a VEMD?
If you can’t Baffle them with Bullxxxt, amaze them with acronyms.

Much like folks who only use airport identifiers in posts.
“So I was flying from CYUY over CYVD then CYQB to …..on and on.”
All great if you are familiar with those but a bit confusing folks from the other side of the world. If needs be they have to look up the codes to get orientated as to continent and city. FYI the codes I mentioned are Rouyn, Val D’or and Quebec City in Quebec, Canada.

Anyhow I found this link which may be of help in answering your question.
https://www.maunaloahelicopters.edu/...D_Training.pdf

Thank you for your valuable input. However my questions are specific to the B2 with Vehicle and Engine Multifuction Display which is different to the Vehicle and Engine Multifuction Display in the EC130B4
And the working knowledge of pilots you operate then on a regular basis. But thank you for the geography lesson.

Its a Vehicle and Engine monitoring display - curtesy of Airbus Helicopters ;-)

The ones who uses them might help codefs ;-)

AS350 B2 with a VEMD?

Never seen that before....

Since about 2007 or so......

Nice to have but that upgrade probably cost like half complete B3