PPRuNe Forums - Looking for someone flying the Helionix system

Page 2 of 2

Show 40 post(s) from this thread on one page

PPRuNe Forums (https://www.pprune.org/)

- Rotorheads (https://www.pprune.org/rotorheads-23/)

- - Looking for someone flying the Helionix system (https://www.pprune.org/rotorheads/621032-looking-someone-flying-helionix-system.html)

BDS29

3rd May 2019 13:36

Quote:

Originally Posted by Flying Bull (Post 10461981)

Version D462C030504 (Step 2.0.3)
Should be fairly actual ;-)

I have no access to the SW detail, however, I think they have done a recent SW upgrade with the "step 3" according to their website.
I am not allowed to put a link, however if you look for the article: "Competitive boost and enhanced operational capabilities for H145"

Flying Bull

3rd May 2019 13:51

Quote:

Originally Posted by BDS29 (Post 10462011)

As with software updates - even in aeronautics - its sometimes wise to check first on one or two machines before using it on the whole fleet ;-)

FloaterNorthWest

3rd May 2019 14:08

Flying Bull,

If on Step 2.0.3 you won’t have SVS 2 and it’s cultural database so won’t get runways, helipads, etc and improved graphics.

Step 3 is fully certified and tested after installation to an airframe so no reason to roll it out onto the whole fleet.

Its better than having a mixed fleet were pilots have to work out which airframe has which software version.

FNW

Flying Bull

11th May 2019 20:45

https://cimg3.ibsrv.net/gimg/pprune....2a4f8fdd8.jpeg
HELIONIX above 3.000ft grd

I had a go exceeding the RadAlt Range, SVS display was still displaying ��

All times are GMT. The time now is 19:18.

Page 2 of 2

Show 40 post(s) from this thread on one page