PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Rotorheads (https://www.pprune.org/rotorheads-23/)
-   -   Looking for work (https://www.pprune.org/rotorheads/573597-looking-work.html)

ka26 23rd September 2015 11:50

Looking for work
 
EASA CPL(H)
Flight Instructor
1770 hours
AS350/EC130 R22 R44
English Level 5
Russian English Italian

Tel +39 3406848311
[email protected]

flingwingdriver 27th September 2015 09:52

Young (58yo) horn dog helicopter pilot (Africa based) looking for one more fling at things.6000+ hours, all sorts of types, many different operations but wants to fly a 500D/E again.East and Central Africa would be good.Minimal needs.No wife (finally). No dependents.Canadian, South Africa and US Commercial Licences.Has not flown in two years so some workup would be necessary. [email protected]

November Mike 22nd January 2016 08:22

Looking for a Helicopter Pilot Position: Africa or Asia
 
With just over 2000 hours (winch/sling rating; IF rating) on B407's + B206(L) + AS350 + EC130 + EC120 + R44's etc, I'm desperately looking for a position.

*Previously worked throughout Africa and Indonesia (from VVIP to HEMS; exploration mine support etc).

I've sent my resume to well over 300 entities this past week with little to no positive responses. :ugh:

Guys, I'm not looking for an easy road per say - just some ideas of whom I could contact and where.

Any guidance or rant will be greatly appreciated! :ok:

Stubble 23rd January 2016 01:58

Looking for work
 
Hi everyone, 11,500 hour Australian helicopter pilot looking for touring job anywhere. Aus/PNG CPL (H) BK117, A119, AS350, B407, B206/L, EC120.
Day/night VFR on/offshore, exploration, seismic, longline, bush fire, medievac, VIP/Corporate, media, stills and motion filming.


All times are GMT. The time now is 16:38.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.