![]() |
ec 135 P2+ overlimit indication
Hello!
I am just on type rating on ec135 and have some questions about for example overtorque or mast moment exceed indication on CAD and FLI. If I understand FM the indication on FLI is red word limit and on CAD eng exceed for torgue above AEO TOP torgue and mast moment indication on FLI. My question is when you turn batt off next time when batt is on what will be indication on CAD and FLI, I understand that eng exceed stays on CAD and word LIMIT on FLI is that correct Tx |
From 135 Training Manual:
LIMIT: symbol with box indicates OEI/AEO time limit exceedance. Exceedance of one of the engine or H/C limiting parameters (30" power, 5' take-off power, mast moment) triggers the LIMIT symbol with the box in the steady state together with the audio signal at once. ENG EXCEED: Significant exceedance of the 30" power band with reaching and maintaining the following values for more than 5 seconds: 133 % Tq, 104.3 % n1 or 990 °C TOT (only possible in case of topping function failure). - The LIMIT symbol with box and activation due to limiting value exceedance. Exceedance of a single time excursion in a OEI power band (2' or 30"). In the latest FADEC software version the caution disappears when the respective power band is left. Exceedance of one of the engine or H/C limiting parameters (30" power, 5' take-off power, mast moment) triggers the LIMIT symbol with the box in the steady state together with the audio signal at once. The total allowed time in a OEI power band is expired. The ENG EXCEED caution is stored in the FADEC and appears at the next engine start up. |
| All times are GMT. The time now is 17:22. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.