Dauphin N3 Simulators
 

Can anyone tell me where there are commercial Dauphin N3 simulators ?
Thanks pp.

Not sure you can find, the only one I know is a Dauphin N2 sim in Helisim (marignanes, france, nearby EC....):)

When I did my N3 cse with Eurocopter earlier last year I was told there wasn't one and no likelihood of one coming.

Helisim, Marseile has 155 simulator. If your cockpit is almost similar with that, you need to fix your needs with it. That's the one way. Some companies doing that way. Contact Helisim and ask possibilities. They will help you out. :ok:

Hostile

As said in previous posts HeliSim have an N2 and 155 Simulators but no N3 simulator. They have however the N2 simulator available with N3 software simulating N3 performance etc. The probplem is that for example Governor Malfunctions for the N3 can not be trained in the Sim.

Check with HeliSim for availability and approvals and check with your CAA if they approved the use of the "upgraded" N2 simulator.

Contact NHV at Oostende, Belgium. They have an N3 sim.
0032498173110

NHV do not have a level D simulator, I believe its a procedural trainer (Entrol H12 FNPT-II)

Many thanks for the information. pp

The same FFS (level B) is in service in Singapour:
Eurocopter South East Asia ... Dauphin AS365 N3 / N3+ Full Flight Simulator.

Heli Union Training Center has a N3 simulator level B in Angoulême. It can be changed from conventionnal cockpit to EFIS.

ATN

And the one in Singapore can be fitted (if requested...) with the APM2010 configuration...and SAR modes....3 cockpits conf possible....

And without the same neighbourhood :O