PPRuNe Forums - Wanted: Module 4 for Arriel 1D1

PPRuNe Forums (https://www.pprune.org/)

- Rotorheads (https://www.pprune.org/rotorheads-23/)

- - Wanted: Module 4 for Arriel 1D1 (https://www.pprune.org/rotorheads/264537-wanted-module-4-arriel-1d1.html)

TangoMikeYankee

17th February 2007 00:23

Wanted: Module 4 for Arriel 1D1

I am after a MO4(module4) for a 1D1. (Servicable:ok: )
To rent, buy or borrow:}
It will be used for about 6 weeks.
Please send me a PM if you have one.

Thanks
Tim

Blackhawk9

18th February 2007 04:55

Good Luck!!! Turbomeca can't even supply the big operators with replacement or rental modules so a small operator doesn't have a chance, have seen multiple eng swaps to keep a/c in serv until eng/module was avail.
Buy an a/c with a Pratts,GE or Allison in it if you don't want a support problem!!

Dynamic Component

19th February 2007 04:33

U don't want to get me started on this subject:mad: :ugh:

rotor-rooter

19th February 2007 13:35

Don't forget Honeywell!

There appear to be a lot of AS-350 operators quietly moving away from the awful problems of trying to keep an Arriel operational!:bored:

All times are GMT. The time now is 17:30.