PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Rotorheads (https://www.pprune.org/rotorheads-23/)
-   -   Principles of flight question (https://www.pprune.org/rotorheads/72489-principles-flight-question.html)

spurs077 13th Nov 2002 14:09

Principles of flight question
 
can anyone help me with this Principles of flight question please?

as forward flight increases, when moving from the hover, in level flight:

a) transistional lift will reduce
b) induced drag will reduce
c) induced flow will increase.

i know that transitional lift drecrease after about 50 kts, but during transistion, the collective is lowered slightly which i beleive decreases the Angle of attack which in turn increase the induce flow. or is it that the molecules flow decreases at increasing speed which should reduce the induced drag?

or am i totally lossing the plot?

any help much appreciated. thank you

Shawn Coyle 13th Nov 2002 16:22

Lots of things happen right at translational lift. But what happens will depend whether you start from IGE or OGE.
IGE- at about the speed when 'translational lift' happens, you'll probably be over-running the ground vortex, so you might see a drop in height. You will probably see (if you're looking) a decrease in torque / increase in RPM with no movement of the collective as the increased induced flow reduces the induced drag on the rotor. THere should be no reduction in collective, unless you do something other folks don't do.
Hope that helps to clear things up.
S.

Cron 13th Nov 2002 17:00

so b and c both correct? Where was the Q from spurs?

the coyote 14th Nov 2002 05:19

Spur:

(b) is the correct answer. As we accelerate, transitional (or translational) lift increases, induced drag reduces and the induced flow decreases.

For a given collective setting (pitch angle) as you accelerate from a hover:

the induced flow will decrease
the induced angle will decrease
the induced drag will decrease (decrease in rotor drag and therefore increase in RRPM/decrease in engine power required)
the angle of attack and total rotor thrust will increase

and so the aircraft will want to climb.

If we don't want that to happen during the initial stage of takeoff, we reduce the pitch angle with collective, which will reduce the increased angle of attack and total rotor thrust back towards where it was prior to climbing.

Shawn:
As you accelerate the induced flow decreases (not increases) which reduces the induced drag. Anything which brings the Relative airflow closer to the plane of rotation will tilt the Total Reaction on the blade more vertical and reduce drag on the rotor. Typo or am I missing something?

vorticey 14th Nov 2002 09:32

shawn
 
you said > at about the speed when 'translational lift' happens, you'll probably be over-running the ground vortex, so you might see a drop in height.
this ground vortex causes a rise in pressure under the helicopter, does it?
ive been trying to say this to nick, only instead of ground vortex, i used ground cussion.

Cron 14th Nov 2002 11:36

I'm confused

'.....as the increased induced flow reduces the induced drag on the rotor.'

' .....as we accelerate, .... induced drag reduces and the induced flow decreases'.

spurs077 14th Nov 2002 18:07

thanks for your input guys,

CRON

by the way, the question was from Bristols ATPL modular course.


All times are GMT. The time now is 08:46.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.