PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Rotorheads (https://www.pprune.org/rotorheads-23/)
-   -   Bell 206B3 ARC Renewal Ideas? (https://www.pprune.org/rotorheads/591766-bell-206b3-arc-renewal-ideas.html)

irish seaplane 4th Mar 2017 14:05

Bell 206B3 ARC Renewal Ideas?
 
Hi,
Posting this enquiry for a friend of mine who is in a jam. He has an EI reg Bell 206B3 that has just had a quite extensive annual done, something in the region of 30k. The annual was signed off by a part 66 engineer. Now he can't get anyone to do an ARC renewal. Anyone he has asked wants to do both the ARC and the Annual.

I told him to try Tony at Walton Woods. Cant seem to get anyone who will do it. Anyone here any ideas of who to go to? The heli is in Shobdon.

Irish

jeepys 4th Mar 2017 15:37

Wow. Expensive annual. Major component issue or just a tired machine?
Try GB engineering/ helicopters near Sherburn in Elmet. Not entirely sure they can help but well worth a call? I used to fly a heli maintained by Glenn Burley and can certainly recommend them.
Good luck.

Hughes500 4th Mar 2017 17:25

Try Jon at Red Kite Helicopters

irish seaplane 6th Mar 2017 12:06

Thanks for the two leads. We will be calling them today. I think there were some component changes on the engine, not sure what it was. It's a good machine and he needs it back. Help much appreciated.

krypton_john 6th Mar 2017 19:35

Expensive? Not even.

I've seen customers charged more than that to empty the ash tray on an AW139.

ScotiaQ 6th Mar 2017 20:14

Pity your friend didn't write both the Annual and ARC into the Maintenance Contract. Then he wouldn't have this problem.

As a previous ARC signatory, it makes ensuring the airworthiness of the machine much easier when the aircraft is in pieces.

Sq

TOT 6th Mar 2017 21:46

engineer
 
Who was the engineering company , why cant they do it?

Efirmovich 7th Mar 2017 06:37

I cant see any respectable engineer wanting to put his name on an ARC unless he thoroughly goes through the Aircraft again. Another corner cutting exercise that has gone wrong by the looks of it !


E.


All times are GMT. The time now is 16:51.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.