Intellistart HUMS for Bell 206
I´m trying to find information on Altair´s Intellistart plus system for the 206 series.
I having a hard time finding a distributor. Does anyone know who sells these things now? I used to fly a L model with this and I liked it, good system and required for some ops. |
|
Not sur eif this is current - my understanding is that PW bought Altair's Intellistart+ system:
NexAir Avionics |
Thanks guy´s, sent Nexair an email. We´ll see but it seems they only support PW.
|
Aesir,
P&WC acquired Altair a decade ago (Altair having originally been teamed with Honeywell). I suspect the system is now managed by Pratt's DPHM team, but look forward to seeing what you find out. I/C |
Hi I have 4 Jet Rangers with Inteli Start, it is owned by P and W but sadly now un supported and no longer available, used systems do come up but make sure it's complete. Overall reliable and does its job well.
|
We administer the Intellistart for a operator with approximately 30 aircraft on the system. The system is now part of P&WC's WEB ECTM and is run by CAMP CAMP > Maintenance Solutions . You should find all the contact on the website.
PM me if you have problems getting the information you need. Longbox. Do you use Turbine Tracker Altair Avionics Ground Station : Welcome as this is the support mechanism for Intellistart. |
Nexair sent me an reply and yes the Intellistart is still available for the C30 and the cost is $24K. It is EASA approved.
Thank´s for the help. |
I would think that was well worth the money - even just for the resale value boost in being able to demonstrate the clean bill of HUMS data.
|
Apologies for the huge thread resurrection, but I just wonder if anyone on here has any information on this system? Looking for a maintenance manual and/or an ICA for the system, but so far I have found nothing!
I followed the links above, but have hit a brick wall with the CAMP link posted. Any pointers would be much appreciated! |
Originally Posted by tbtstt
(Post 11171582)
Looking for a maintenance manual and/or an ICA for the system, but so far I have found nothing! Any pointers would be much appreciated!
https://www.pwc.ca/en/products-and-s...oring-services |
Originally Posted by wrench1
(Post 11171698)
Altair went through several acquisitions and is now under the Pratt & Whitney brand. Here's a link to get you going. Scroll down the page and you'll see IntelliStart listed. A call/email to their tech support should get you your answers.
https://www.pwc.ca/en/products-and-s...oring-services I have been given a contact within PWC to obtain more information, so I have just dropped them a line and I am hopeful that will yield results. It is not a supported product I can see listed on the PWC portal, but I'll see what they say... |
Originally Posted by tbtstt
(Post 11171737)
It is not a supported product I can see listed on the PWC portal, but I'll see what they say...
|
All times are GMT. The time now is 17:53. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.