PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Rotorheads (https://www.pprune.org/rotorheads-23/)
-   -   It should polish out!! (https://www.pprune.org/rotorheads/520260-should-polish-out.html)

HeliHenri 30th Jul 2013 14:58

.
Hello A S,

As I said before your post, I made a mistake.

so you did, we're talking about Attessa IV ! ;)

Attessa IV ? the masterful rebuild that produced a superyacht masterpiece

.

Anthony Supplebottom 30th Jul 2013 15:21


so you did, we're talking about Attessa IV !
Apologies. Didn't realise it was necessary to explain that it was the same person who commissioned Attessa III also commissioned her successor.

nomorehelosforme 30th Jul 2013 22:25

No polish needed!
 
Unwrap it and it will be squeaky clean!

ecureilx 31st Jul 2013 09:18


Originally Posted by Heli-News

Heli-News: I was going to post the gCaptain picture and you beat me to it ..

Above picture is from gCaptain.com

mickjoebill 31st Jul 2013 16:29

Atessa IV has new port side thruster...


Handrails on the helideck are visible in images taken before the rollover.


Mickjoebill

icedriver 31st Jul 2013 22:41

New EC fuel drain procedure.

ShyTorque 1st Aug 2013 06:22

Perfect example of why one blade should be parked over the nose..... of a three blader. ;)

Hope the underside wasn't mucky or the pilot will be really in for it.


All times are GMT. The time now is 14:55.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.