PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Rotorheads (https://www.pprune.org/rotorheads-23/)
-   -   V22 Osprey discussion thread Mk II (https://www.pprune.org/rotorheads/490255-v22-osprey-discussion-thread-mk-ii.html)

SASless 20th Mar 2019 17:39

Amazing how one's typing errors can be reported....thank you!

The Sultan 19th Dec 2019 21:02

Navy Greyhound Replacement First Flight
 
The first CMV-22 has flown with first deployment in 2021. Excerpt highlights the improvements over the C-2 Greyhound it is replacing.


Compared to the current aircraft, the C-2A Greyhound, the CMV-22B has an increased range, more cargo capacity, enhanced beyond-line-of-sight communications, and offers quicker cargo loading and unloading, according to the Navy. “The most notable structural difference between existing V-22 variants and the CMV-22B that can be seen in the photo is the bulbous fuel tank extensions to the forward portion of the sponsons on either side of the aircraft”

chopper2004 21st Jan 2020 17:07

CMV-22B complete its first flight
 
Bell Boeing CMV-22B Osprey Successfully Completes First Flight - Bell (news)


https://cimg7.ibsrv.net/gimg/pprune....ff1efdabf.jpeg

chopper2004 8th May 2020 22:43

JGSDF pair arrive home
 
First two Bell-Boeing V-22 Ospreys for the JGSDF have arrived in Japan , by sea transportation.

Cheers


chopper2004 10th Jun 2020 16:14

400th delivered
 
400th airframe delivered ....this time a CV-22 to AFSOC.

https://news.bellflight.com/en-US/18...th-v-22-osprey

cheers

helicopter-redeye 10th Jun 2020 20:51

https://cimg2.ibsrv.net/gimg/pprune....2a5c6bd5e.jpeg
If you see an Osprey in the UK, is it a US machine or UK military? I get a lot of overflights

Praet 11th Jun 2020 00:13

The UK is not operating V-22. Based on nose equipment, markings and camouflage scheme, that's a USAF spec ops CV-22A.

chopper2004 11th Jun 2020 00:17


Originally Posted by Praet (Post 10808042)
The UK is not operating V-22. Based on nose equipment, markings and camouflage scheme, that's a USAF spec ops CV-22A.

It’s a B model

cheers

chopper2004 11th Jun 2020 00:21


Originally Posted by helicopter-redeye (Post 10807945)
https://cimg2.ibsrv.net/gimg/pprune....2a5c6bd5e.jpeg
If you see an Osprey in the UK, is it a US machine or UK military? I get a lot of overflights

They have been based here since summer 2013... with the 352nd SOW at RAF Mildenhall.

https://www.mildenhall.af.mil/About-Us/

https://www.352sow.af.mil

cheers



chopper2004 11th Jun 2020 00:26

ViP
 
Laying aside HMX-1 Mv-22B, earlier this year at International Military Helicopter conference, I spotted at the Bell table, aViP brochure.

https://www.bellflight.com/-/media/s...p-brochure.pdf

cheers

Praet 11th Jun 2020 19:17


Originally Posted by chopper2004 (Post 10808044)
It’s a B model

Indeed it is, late night mixup - sorry :)

chopper2004 7th Jul 2020 15:31

Indonesia
 
Interesting that they requested to purchase eight (8) MV-22 Block C Osprey aircraft.

https://www.dsca.mil/major-arms-sale...sprey-aircraft


chopper2004 1st Sep 2020 16:33

First ANG unit established FLANG
 
First cV-22 Guard unit activated today - Florida Air National Guard 249th Special Ops Squadron ..

https://www.hurlburt.af.mil/News/Art...v-22-squadron/


https://cimg7.ibsrv.net/gimg/pprune....b50c6cdbc.jpeg


cheers


chopper2004 24th Mar 2021 21:19

Past 600000 hours
 
The fleet has surpassed 600000 hours

https://news.bellflight.com/en-US/19...nPF4bdpZjq6LB8

chopper2004 21st Apr 2021 21:29

Addenbrookes Hospital lunchtime
 
352nd Media FB Page flashed up their CV-22B would be gracing our hospital helipad as part of patient transfer / medical transport interoperability with local NHs and East of England Ambulance service. As it is the helipad is mainly for likes of EAAA Airbus Helicopters H145, Essex Herts Leonardo AW169, MAGPAS Leonardo AW169 etc. Anyhow popped along to take photos and video , liaise with public affairs from the base, and the Landing was interesting. It reminded me of the videos and photos of mil RW carrying out brown-out landings, anyhow here are my photos below.


https://cimg5.ibsrv.net/gimg/pprune....d66b2a6b2.jpeg
https://cimg7.ibsrv.net/gimg/pprune....3b2aa901e.jpeg
https://cimg9.ibsrv.net/gimg/pprune....1df7fe086.jpeg
https://cimg0.ibsrv.net/gimg/pprune....f1e680db7.jpeg
https://cimg1.ibsrv.net/gimg/pprune....61bef2641.jpeg
https://cimg2.ibsrv.net/gimg/pprune....1a0cd1c25.jpeg
https://cimg3.ibsrv.net/gimg/pprune....44f7fc601.jpeg
https://cimg4.ibsrv.net/gimg/pprune....61244cce9.jpeg

Cheers

FloaterNorthWest 21st Apr 2021 21:31

Video of the landing. The take-off at the end is interested

https://www.youtube.com/watch?app=de...l=Trailspotter

JimL 22nd Apr 2021 06:49

This appears to be a salutary lesson on the use of ‘anchored’ surfaces at a heliport. The safety assessment, prior to the decision to fly the CV22B to Addenbrookes, might have picked up the fact that the surface was inadequate for the type.

From ICAO Annex 14, Volume II:

3.1.1 A FATO shall:

a) provide:

1) an area free of obstacles, except for essential objects which because of their function are located on it, and of sufficient size and shape to ensure containment of every part of the design helicopter in the final phase of approach and commencement of take-off in accordance with the intended procedures;

Note.— Essential objects are visual aids (e.g. lighting) or others (e.g. firefighting systems) necessary for safety purposes. For further requirements regarding penetration of a FATO by essential objects, see 3.1.4.

2) when solid, a surface which is resistant to the effects of rotor downwash; and
i) when collocated with a TLOF, is contiguous and flush with the TLOF, has bearing strength capable of withstanding the intended loads and ensures effective drainage; or
ii) when not collocated with a TLOF, is free of hazards should a forced landing be required;
Note.— Resistant implies that effects from rotor downwash neither cause a degradation of the surface nor result in flying debris.

Bravo73 22nd Apr 2021 07:27


Originally Posted by FloaterNorthWest (Post 11031981)
The take-off at the end is interested

Holy moly! :eek:

chopper2004 22nd Apr 2021 08:37


Originally Posted by JimL (Post 11032118)
This appears to be a salutary lesson on the use of ‘anchored’ surfaces at a heliport. The safety assessment, prior to the decision to fly the CV22B to Addenbrookes, might have picked up the fact that the surface was inadequate for the type.

From ICAO Annex 14, Volume II:

3.1.1 A FATO shall:

a) provide:

1) an area free of obstacles, except for essential objects which because of their function are located on it, and of sufficient size and shape to ensure containment of every part of the design helicopter in the final phase of approach and commencement of take-off in accordance with the intended procedures;

Note.— Essential objects are visual aids (e.g. lighting) or others (e.g. firefighting systems) necessary for safety purposes. For further requirements regarding penetration of a FATO by essential objects, see 3.1.4.

2) when solid, a surface which is resistant to the effects of rotor downwash; and
i) when collocated with a TLOF, is contiguous and flush with the TLOF, has bearing strength capable of withstanding the intended loads and ensures effective drainage; or
ii) when not collocated with a TLOF, is free of hazards should a forced landing be required;
Note.— Resistant implies that effects from rotor downwash neither cause a degradation of the surface nor result in flying debris.

It’s been 16 years since I was involved in Setting up our helipad at work for after hours operations by purchasing / leasing landing lights and installing them.

If anyone here has flown in a patient here to our helipad, it would be interesting to hear their thoughts. Anyhow the other week I went on long walk and saw on ADSB that an Essex Herts Explorer was on deck and hung around to take photos of it departing in the early evening.


https://cimg2.ibsrv.net/gimg/pprune....fcecb9289.jpeg
https://cimg3.ibsrv.net/gimg/pprune....f8f6d499d.jpeg

Last year just after my birthday in September I have a lift to a friend of mine as she had a semi urgent appointment at Addenbrookes and as a reward she took me for belated birthday dinner and cocktails. As it happened the pad had a visitor who was a long long way from home....to drop off patient possibly to Papworth.


https://cimg7.ibsrv.net/gimg/pprune....14743223c.jpeg
https://cimg8.ibsrv.net/gimg/pprune....5b900fac0.jpeg


TbH this helipad was for years meant to be a temporary as around a decade ago something like quarter of a million quid was meant to construct a proper helipad. But the money went, disappeared also at the time I did hear a whisper (perhaps my attempts at chatting up a female member of staff be it clinical or admin lol !! ) that there be a rooftop helipad on the ATC (Addenbrookes Treatment Center) as it was at the newest building for patients.

https://cimg4.ibsrv.net/gimg/pprune....d8f5babd1.jpeg
https://cimg5.ibsrv.net/gimg/pprune....62cb40019.jpeg
And here is the ATC Building below

https://cimg6.ibsrv.net/gimg/pprune....e61e993ba.jpeg

Obviously the old main bit where in patients, the concourse and majority of the wards is early 1960s construction so no way in hell would a rooftop helipad be constructed.


https://cimg8.ibsrv.net/gimg/pprune....0dcc2ee3d.jpeg
In the County the revamped new Peterborough General Hospital has a rooftop helipad as far as I know.

Anyhow here prior to the introduction of HEMS in uk, the likes of iconic Yellow RAF Wessex or Sea King be touching down on the Grass nearest the railway line by Long Road Sixth Form college side with either NICU transfers (my mom worked as sister in SCBu/NICU at Rosie) or the odd RTA in the day.

But all that area is now built up with new biomedical research campus and still more construction happening.

cheers

[email protected] 22nd Apr 2021 10:32

If they had actually landed on the pad, they would have avoided it blowing away and avoided digging the nosewheel in so much. Clearly not much of a recce was done beforehand.


All times are GMT. The time now is 18:24.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.