PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Rotorheads (https://www.pprune.org/rotorheads-23/)
-   -   Rotorflug 206 down in Spanish street (https://www.pprune.org/rotorheads/464048-rotorflug-206-down-spanish-street.html)

Bronx 21st Sep 2011 09:01

BigFrank

Words fail me.
They didn't.
Unfortunately. :rolleyes:

mickjoebill 21st Sep 2011 11:32


so apparently they were not only overflying at low leve a urban area with a single engine helicopter but they were inside a restricted area.
We do not know if they were flying low level.
German pilot two Austrian crew. If their mission was Jerez to Malaga as reported they weren't going direct, is it mandatory to overfly Santa Maria to the South East if ones destination is to the East?

Apparently this was their mission...flying along the coast doing orbits of hotels. Nice idea hope the idea catches on ... work for all.


Google Translate

Here is a promo of the filming operation, edited a few weeks ago, happily, all the shots are from a respectable height:ok:
It is normal for the camera op to sit in the rear left with recording and cineflex control equipment and recorder on the other seat, and hopefully not blocking the exit, thus the 2nd passenger usually sits in the front.
Google Translate

Note that the still picture on the website of a camera man filming from the front left seat with a hand held broadcast size camera is a red herring, as he was probably just shooting a few promo shots, not likely that this camera was being utilized during the shoot.


Mickjoebill

Runway101 22nd Sep 2011 07:19

Here is an article and interview with the camera operator on board. He got away only with scratches, but the other pax is still in hospital with internal injuries and has been hit hard.

According to him, the helicopter started spinning at around 1400 feet, probably due to a "malfunctioning tail rotor", and "scraped" some walls of buildings next to the church, before it fell onto the street.

Google Translate

http://resources.vol.at/vorarlberger...1378767926.jpg


All times are GMT. The time now is 16:21.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.