helmet cams
 

how many of you guys wear helmet cams while flying? im looking for one that attaches to a DC headset. any recommendations?

I've used the GoPro Hero HD on my helmet, but actually never inside a helicopter. It is actually an outdoor action camera, but the autofocus mode can be changed so it works well inside too ("like if you are filming from the inside of a rally car" according to the user guide, this would make sure the camera doesn't focus on the close objects like the dash board).

It's a wide angle lens, with the best image quality I've seen for an action cam (different HD modes, also 60hz mode), and there are plenty of mount kits that you can get for it (suction, helmet, straps, mountain bike, chest mount). Not sure how it mounts on a headset though. Might be tricky to get it to stay in place. But to be honest, a fixed camera looks much better than one mounted on your head in my opinion.

Search gopro here on pprune and on youtube, you'll find plenty. And check the official web site for the mount kits.

Fixed position:


Helmet mount:

I have used a "bullet cam" attached to the headset. It has an external mic that can record the RT. This system comes with a little screen so you can ensure the picture is level before you start.

ContourHD is another option.

For headmount use 60 frames/sec to avoid pan framerate stagger.
110deg gives less distortion than 135.

Sample;

Helmet Cam with a Difference
 

Slightly away from the intended area of operation under discussion, but evidence of the durability of the GoPro as an externally mounted helmet cam used by son and overdraft (as distinct from son and heir, you understand!).

qwikstop: how does the external mic on your bulletcam record the coms?

How Much ?
 

Depends if you want;

Cheap
Intermediate
Good Quality / Easy Life

You can pick up a really cheap simple micro-cam with a few various brackets for about £30 from the cpc website. It is difficult to find though;
CNM LIFESTYLE|MD90-CAM|CAMERA, DIGITAL, MINI, BLK+2GB | CPC
Works OK but not brilliant quality.

As mentioned elsewhere there's the GoPro circa £200

But I just noticed (haven't seen or used) the Nflightcam Cockpit HD GPS Video System on the transair website - looks sweet and has an adapter for recording by plugging into the intercom (but I bet it wont have a helicopter plug with it). Circa £300+

All of the above are better suited to mounting in the cockpit but the Oregon Scientific does actually come with a helmet mount - although everyone I know that has tried this series of cameras for mountain biking or track-days normally come back with pictures of the road or the sky - so might take some trial and error...
ATC9K HD Action Camera

Circa £1-200 depending on HD etc.


CC

Rotorwashed: it has a small external mic that I put in the earcup of the headset. It's not ideal but works well enough.

GoPro is the only way to go. I use the Hero HD on my helmet, inside and outside the helicopter. Plus it works for so many other things. Great for sports of any kind. Goes to 180 feet underwater too. I capture images and video that I never would have been able to do before, being able to show people what it looks like for some of the things we do. Great price too.

helmet cams 101
 

Box shape of the gopro is not ideal for use on a helmet.
In general I'd recommend the lipstick form factor for helmets.
There are new models of the lipstick models being released regularly, one was launched a few weeks back for firemen's helmets $290. (but it is lower res 720p than gopro 1080p, gopro also does 5mp stills)
Wix.com - Website built by firecam based on Blank Website

Gopro is highest quality with excellent auto everything, they are being used regularly for short shots in TV commercials. Beware that transcoding is required to edit the footage in some apps. A clip-on monitor screen will be launched soon for the gopro. I hope they make a version in lipstick form factor as they are ahead of the rest of the field.

Beware that being a rolling shutter cmos sensor they impart a "jello effect" on the image if the camera is oscillated or vibrated. Not critical for home use but a deal breaker for high end data gathering.
Rigid plastic self adhesive velcro pads are a reliable, cheap form of non permanent frangible mounting that does not compromise the integrity of a helmet.

Mickjoebill

Too much choice
 

I'm looking for an HD min-cam to mount in a glider cockpit and possibly externally. The GoPro has rave reviews but no LCD for aiming or playback (although you can buy an add-on for £90, making a very clunky piece of kit). Not sure if it has remote IR either. The Oregon ATC9K does have a screen and is more streamlined, has IR and is waterproof to 20ms without a separate housing. Some reviews slate the quality of the mounts/brackets, though and battery life is 50% of the GoPro. The Drift HD170 has IR and a screen but is a bit larger.

Does anyone have any experience with the Oregon or the Drift and/or comment on the relative quality of output?

Contour HD. Very good solution, better size and shape than the GoPro. Nothing external though, point, shoot and hope for the best. Its actually the same camera as is being marketed by Transair as the Nflightcam, see chopperchappie's post.

HC

The Hero has had a couple of additional options recently: see their website. This includes the ability to connect to external power and new camera back with an LCD screen. Should help to make use of the camera which has really good quality pics/video.

1080p CamSports HDMax Extreme Helmet Camera

Try this as an alternative to the Go Pro. Built in screen, laser level guide when head mounted.

GoPro here . . .

I've owned both the Oregon ATC9K and the GoPro Hero HD. Forget about the Oregon, GoPro is the way to go. Can't speak about the other models, like Contour etc...

The new LCD add-on for the GoPro is very small, it doesn't make it "clumsy" at all.

Here is a GoPro User forum I found very useful:
GoProUser.freeforums.org • Index page

POV Vio 1.5
 

I haven't used one but I've heard good things about the PIO Vio 1.5 (google it). Two attractive features for me are:

- uses 4 x AA batteries (2.5 hrs/alkaline, 5 hrs/lithium)
- A "loop mode" where the camera will film for a user set period of time and then erase and start over again UNLESS the user tags the clip in which case it gets saved. This saves memory and simplifies the editing process later.

You can find reviews for this and other cameras on Youtube...

I've used the contour HD during my training. There is a new model out which records full 1080 HD. My camera is only 720 HD but still has excellent picture quality. I used velcro to attach it to my David Clarks, using the little lanyard supplied just in case the velcro let go (It never has). I like the fact that the camera has a built in laser for making sure all is level. Plus the quality is good enough to be able to read the instruments as well as taking in the scenery.

On the down side there is no input for an external mic, so you have to make do with the built in mic which is a bit rubbish.

I looked at the GO PRO but you need to have it facing forward and I thought I'd look even more of a numpty with a box on top of my head.

Hope this helps.

Monkey

The Go Pro has a head mounting which works like a night light/miners lamp. It fits comfortably over your head, with the box on your forehead and not on top like a square unicorn.

My only comment on the Go Pro is that the various physical mounts were susceptible to vibrations, which was annoying. Putting it in time lapse mode solved that, and quite frankly was a little more useful than lots of video. Though that is more a matter of personal preference.

Vibration with GoPro
 

I also saw a lot of vibration when hard mounting to the aircraft. I resolved this for 720p video a few ways:

• Mount to the aircraft frame or something attached directly to it. The closer you are to the frame, the less vibration there is.
• Use the shortest mount you can. Again, the closer you are to the mounting point, the less vibration there is.
• If the camera's case comes very close to the aircraft in any place, use a wad of double-sided tape between it and the aircraft. This not only firms up the mount a tiny bit, but it seems to reduce vibration.

I use an Ultra-clamp with the GoPro tripod mount adapter and clamp to a point on my helicopter's frame.

If you're using the GoPro-provided mounts, be sure to use that white rubbery thing that came with them to reduce vibration in the clip.

Here are two recent examples with my current setup. The first is long with most flight at higher altitude:



This one is much shorter with mostly low-level flight:



I am still unable to capture 1080p video without excessive vibration, despite my use of a Class 10 SD card (increased writing speed) and what I consider a rock-solid mount.

The drawbacks to my current setup are primarily the fact that I can't tilt the camera down. I'm working on that.