R44 Photography Door
Hi All, Just Wondering if anyone has ever come across a R44 front left door with a small sliding section built into the perspex, to enable an aerial shot to be taken safely without the need for the standard door to be removed. Something like the sliding section on the good old B47 is what I have in mind. Cheers in advance for any advice.:)
|
Tooltech make doors like what you mentioned for the R22, not sure if they make them for the R44. Don't know a website for them but am sure a google will fix that.
TiP |
Cheers Tip, I'l try that :ok:
|
Techtool plastics
Welcome to Tech-Tool Plastics Nothing for the 44 like the previous poster said, but that is their website. |
When I was at HAI in the spring they had a full set of tech tool doors for the R 44 identicle to the R 22. Maybe they haven't been STC'd them yet. I would phone them direct.
|
I contacted Tech Tools after HAI. The prices are eye-watering (thousands of dollars per door) and there is as yet no STC. They send you a standard letter to complete with a request for manufacture - which I guess is part of the STC process.
|
photograhphic door
Hi
We'd made one in Lithuania, rigth-back one. I wouldn't recommend to have any of the left open door during the flight because of the risk of loose items striking the tail rotor. Also, I'm looking to purchase R44 in a quick time now, any of you might recommend something? Thanks Viktor |
Hello Viktor, I have a raven II ya can buy,
|
I have a raven II as well
|
Tried TechTool and they only have approval for an R22 door at the minute but there working on a R44 version. The current door is a staggering $2,595. Think I might just try for a second hand one and cut a hole in it!!
Not a bad suggestion Vicktor to place the camera man in the back right, at least that way he's on the same side as the driver. All I need now is some Florida style weather. Keep thesuggestions coming. |
All times are GMT. The time now is 21:52. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.