PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Rotorheads (https://www.pprune.org/rotorheads-23/)
-   -   100 years of helicopter flight (https://www.pprune.org/rotorheads/300164-100-years-helicopter-flight.html)

skadi 13th Nov 2007 13:32

100 years of helicopter flight
 
Exactly 100 years ago, on 13. November 1907, the first flight of a helicopter took place.
Paul Cornu ( France ) reached an breathtaking altitude of about 1 ft and a total time of 20 seconds.

:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D

skadi

FlyingWay 13th Nov 2007 16:11

First helicopter shape

DennisK 13th Nov 2007 21:15

First heli flight
 
Hi lads & lasses,

Having just spent a delightful week or two researching anything to do with Paul Cornu, Breguet Bros etc and the early helicopters, Plug plug ... please read my efforts in the new quarterly newspaper ...Blades ... www.loop.aero ... It seems to me, most unlikely Cornu actually got airborne at all.

There are no photos available to support Cornu's report of a 'first flight' on November 13, whereas there are piccies of Louis Breguet's 'Gyroplane No 1' fully airborne, perhaps a month earlier. The Breguet-Richet design was a quad rotor with four 'bi-plane' rotors mounted in each corner of a tubular cross frame, providing no less than 32 lifting surfaces, all driven by a 40 hp 'Antoinette' engine! So there.

Cornu's engine delivered a bare 24 hp, so even with a Mauw of only 250kg ... as the great Sikorsky observed, that level of power wasn't sufficient to ever achieve vertical lift. If anyone with a university degree wants the vertical lift formula dial up Google.

Paul Cornu's claim to be first was based on his own report ... but as they say. He would say that, wouldn't he!

But Hey ... both these Frenchmen must truly be given the credit.

PS. Anyone out there fancy building a working model of Da Vinci's 'Airscrew' design ? Bet some bright spark could make it fly.

Dennis Kenyon.


All times are GMT. The time now is 18:20.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.