Kobe Bryant killed in S76 crash
Glad to hear that you got a better MX package than we did. So glad I'm in a modern new build aircraft now. Schlepping 35 year old **** boxes around doesn't inspire me much anymore. The OT days were the worst for bad Georges I heard once.
A certain small Helicopter Operator used to have some Sfena Autopilots on some of its 212's.....now that was a joke!
But then by the time those aircraft got to the end of the line....it was a good day when the cockpit doors would stay shut and the blades not come apart.
No corner cutting there.....uh uh no.
But then by the time those aircraft got to the end of the line....it was a good day when the cockpit doors would stay shut and the blades not come apart.
No corner cutting there.....uh uh no.
Join Date: Apr 2002
Location: canada
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Not really, the AP won't kick off, it continues to drive the other 2 axes in the normal way. But the flying will feel "sloppy" in the channel that has gone "hard over" because both series actuators will be out of the equation (with the good actuator still playing but driven all the way opposite to the failed channel).
Oh, fair enough. I've never seen it happen in a C, C+ or C++, what the older rides did I can't remember.
That's right. And for those not familiar with the indicator. The pointer represents the displacement of the actuator from the central position. One indicator for each linear actuator. The selector knob selects the axis you wish to monitor. So the indicator can monitor all six linear actuators (i.e. three pairs). Normal presentation is the pointer for each actuator darting about the central position, with each pointer more-or-less moving in the same direction at the same time. Abnormal indication is one pointer stopped whilst the other pointer is moving twice as far as normal, or pointers moving in opposite directions to each other, or "hard-over" one full left whilst the other full right.
Avoid imitations
Join Date: Nov 2000
Location: Wandering the FIR and cyberspace often at highly unsociable times
Posts: 14,573
Received 421 Likes
on
222 Posts
I used to fly an S-76B that developed a strange fault. The heading bug would, at random times, kick round to a heading of 060 degrees. If coupled up, the aircraft would snap into a turn onto that heading. A bit disconcerting, especially in solid IMC under radar control.
ASI normal for a 76 in the cruise when you compare it to this pic:-
ASI pretty normal for 76 in the cruise. This isn’t a B model but ASI in same place as the picture posted earlier.
ASI pretty normal for 76 in the cruise. This isn’t a B model but ASI in same place as the picture posted earlier.
I have seen the 76 flight director fail to acquire ALT in the climb on more occasions than I can remember. I’ve also seen the whole flight director just decouple and lights go out with zero warning. No bells or whistles. Apart from that the AP/FD on the 76’s is very good in my experience.
I have seen the 76 flight director fail to acquire ALT in the climb on more occasions than I can remember. I’ve also seen the whole flight director just decouple and lights go out with zero warning. No bells or whistles. Apart from that the AP/FD on the 76’s is very good in my experience.
might need some memory assistance on this one, but caption states not a B model. I can't remember a straight C or C+ that had steam and EFIS. There were even some late B's that had the full EFIS and IIDS suite. So, if it is a B, then the PT6 had the torque/temp match selector, and in this image, it may have been selected to temp match. It was pretty much useless for sea level drivers and didn't offer any gain under normal ops. Always left it Torque match.
First report is now out
report gen
just 2 pages
report gen
just 2 pages
On January 26, 2020, about 0945 PST, a Sikorsky S76B helicopter, N72EX, crashed into hilly terrain near Calabasas, California. A post impact fire ensued and resulted in a brush fire. The eight passengers and one pilot onboard were fatally injured and the helicopter was destroyed. The helicopter was operated by Island Express Helicopters. Weather at Van Nuys airport, about 14 miles northeast of the site was reported as 1,100 feet overcast with 2 ½ miles visibility. The flight was operated under the provisions of 14 CFR Part 135 under visual flight rules from John Wayne Airport (KSNA), Santa Ana, California, to Camarillo Airport (KCMA), Camarillo, California. An Investigative Webpage is located at https://www.ntsb.gov/investigations/...CA20MA059.aspx.