Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

Fuelling up- H145

Wikiposts
Search
Rotorheads A haven for helicopter professionals to discuss the things that affect them

Fuelling up- H145

Thread Tools
 
Search this Thread
 
Old 7th Nov 2019, 16:35
  #1 (permalink)  
Thread Starter
 
Join Date: Oct 2010
Location: India
Age: 48
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Fuelling up- H145

Hi,

I haven't been able to tankup our H145 to its capacity, since it was recieved from assembly line in Feb 2019. I have seen 670kg tops, on gauge. Is it the same for others too? There has been a fuel tank valve replacement by Airbus Helicopters, but still no joy. Views, inputs and experiences are welcome.


Thanks

P.S. - Credible tolerance values at full tank if available, may bring about satisfactory reply too.
peeush is offline  
Old 7th Nov 2019, 21:05
  #2 (permalink)  
 
Join Date: Feb 2006
Location: Germany
Posts: 919
Received 5 Likes on 3 Posts


H145 at N8
Check fuelstate / thats in flight about 10 min after off block ;-)
Flying Bull is offline  
Old 8th Nov 2019, 01:06
  #3 (permalink)  
 
Join Date: Jul 2014
Location: South East Asia
Age: 54
Posts: 320
Received 32 Likes on 21 Posts
Most rental car contract require returning the car full fuel, but fuel next to airport is high price.

So what you do is fuel it next to your hotel 50 Km away the night before at beyond capacity.

Fuel it full, wait for the pump release click, shake the car (quite a few dead air comes up) fuel again.

6 am at the airport fuel gauge still on "Full"
Agile is offline  
Old 8th Nov 2019, 01:48
  #4 (permalink)  
 
Join Date: Mar 2011
Location: London/Atlanta
Posts: 446
Received 13 Likes on 10 Posts
Originally Posted by Agile
Most rental car contract require returning the car full fuel, but fuel next to airport is high price.

So what you do is fuel it next to your hotel 50 Km away the night before at beyond capacity.

Fuel it full, wait for the pump release click, shake the car (quite a few dead air comes up) fuel again.

6 am at the airport fuel gauge still on "Full"
Funny enough I saw that same advice on the pros and cons of car rental on Tripadvisor......
nomorehelosforme is offline  
Old 8th Nov 2019, 01:59
  #5 (permalink)  
 
Join Date: Dec 2003
Location: Melbourne, Australia
Posts: 254
Received 16 Likes on 7 Posts
Very good advice, Agile. I'll remember that for next time.
Tickle is offline  
Old 8th Nov 2019, 12:07
  #6 (permalink)  
Thread Starter
 
Join Date: Oct 2010
Location: India
Age: 48
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Flying Bull


H145 at N8
Check fuelstate / thats in flight about 10 min after off block ;-)
Thanks, it helps
peeush is offline  
Old 8th Nov 2019, 18:55
  #7 (permalink)  
 
Join Date: Feb 2006
Location: Germany
Posts: 919
Received 5 Likes on 3 Posts
If it helps,
i have another photo, where I had a little problem
with the TOT
688 kg of fuel



VMS page H145
Flying Bull is offline  
Old 9th Nov 2019, 05:09
  #8 (permalink)  
hueyracer
Guest
 
Posts: n/a
I guess your problem has been solved-but in general, all helicopters with "rubber-type" fuel tank(s) have the same problem..

It takes a while until the tanks have stretched a bit, and the aircraft can take its maximum amount of fuel possible... From my experience, sometimes more than a hundred refuelings....but at the end, it will get there...
 
Old 9th Nov 2019, 08:48
  #9 (permalink)  
 
Join Date: Apr 2003
Location: U.K./nigeria
Posts: 114
Likes: 0
Received 0 Likes on 0 Posts
I have been in aviation quite a long time and been involved with replacing quite a number of flexible tanks, but this is the first I have heard of 'stretch fit' Surely this is not correct, (or is it?)
bluesafari is offline  
Old 10th Nov 2019, 00:03
  #10 (permalink)  
 
Join Date: Aug 2009
Location: australia
Age: 60
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by bluesafari
I have been in aviation quite a long time and been involved with replacing quite a number of flexible tanks, but this is the first I have heard of 'stretch fit' Surely this is not correct, (or is it?)
I doubt it too.
rottenjohn is offline  
Old 10th Nov 2019, 16:40
  #11 (permalink)  
hueyracer
Guest
 
Posts: n/a
I never paid attention to this before I started flying the 135 in the military version.. (self sealing tanks).

There this is a real problem....
Later on I learnt that this seems to be specific to bulletproof ("self-sealing") tanks, and on the BK117 we could actually solve this by opening the floor panels and readjust the fuel tanks..

Believe it or not.. It worked..

"Stretching" does not mean then material is giving in... But the tanks in some helicopters seem to need some time until they can be filled to max..
 
Old 13th Nov 2019, 10:21
  #12 (permalink)  
 
Join Date: Jul 2012
Location: Various
Age: 54
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Fuel SG issue?

We've been operating two new H145 T2's since early May and have had the same fuel indication issue on both aircraft throughout. The fuel amount for a full main tank has varied from as little as 677 kgs, up to a maximum of 712 kgs. Our Engineers have been working hard to figure out what the issue is. At first, it was thought it was the 'age old' 145/117 ball valve, slope of the ground issues etc. However, with both aircraft indicating the same main tank fuel amount after refuels on the same day, (within 1-2 kgs) the feeling was the issue was being caused by something else. After multiple defuels and refuels, where, by the amount supplied via a fuelling truck, they could guarantee that the tanks were full to the max possible (as stated in the RFM by Airbus), our engineers narrowed down the issue to being caused by a change in the specific gravity of the fuel being supplied to us. When the refuel company informed us that they were using a new batch of fuel, the fuel SG had changed when checked and the maximum amount indicated in both our aircraft main tanks changed too! The SG has varied from 0.775 up to 0.795. Airbus are aware of this issue elsewhere in the world and are sending out an engineer next week, to train our engineers on how to recalibrate the main tank fuel probes. We're told that airbus are working on a permanent fix?

Pain in the arse when you need a certain amount of fuel to be indicating on TEMPO days!

Hope this helps?
alfasprite is offline  
Old 13th Nov 2019, 16:35
  #13 (permalink)  
 
Join Date: Mar 2003
Location: the hills of halton
Age: 71
Posts: 809
Likes: 0
Received 0 Likes on 0 Posts
IS the fuel flow normally different between # 1 AND # 2 , Not a huge difference.

widgeon is offline  
Old 14th Nov 2019, 04:05
  #14 (permalink)  
 
Join Date: Nov 2006
Location: After all, what’s more important than proving to someone on the internet that they’re wrong? - Manson
Posts: 1,841
Received 51 Likes on 36 Posts
IS the fuel flow normally different between # 1 AND # 2, Not a huge difference.
Which is reflected in the N1 speed.

Lots of variables at play there.
RVDT is offline  
Old 14th Nov 2019, 07:23
  #15 (permalink)  
 
Join Date: Oct 1999
Location: Den Haag
Age: 57
Posts: 6,244
Received 330 Likes on 183 Posts
Originally Posted by RVDT
Which is reflected in the N1 speed.

Lots of variables at play there.
Looks like a result of TRQ matching - must be the German background as normally Airbus/EC/AS go for N1 matching! Of more interest - what happened to the number 2 TOT???
212man is offline  
Old 14th Nov 2019, 07:45
  #16 (permalink)  
 
Join Date: Dec 2007
Location: Land of the Krauts
Posts: 307
Likes: 0
Received 1 Like on 1 Post
I've flown about 15 different H145 (D2/T2...) in the last four years and I couldnt fill up a single one of them as per the max capacity of the FM. 573Kg in the main tank is my personal record and the last 50L are always a pain in the a** with fuel foam rising up. Its still nice to fly an aircraft that can actually be fueled up all the way and still be ready for all the missions I could throw at it while still being within CAT-A limits.
eivissa is offline  
Old 14th Nov 2019, 10:54
  #17 (permalink)  
 
Join Date: Dec 2003
Location: The South
Age: 58
Posts: 517
Likes: 0
Received 4 Likes on 2 Posts
The BK117 D-2 matches N1 at low power, switches to TRQ matching at intermediate power and at high intermediate to high power matches the FLI power margins so don’t expect to see exactly matching parameters at cruise powers.

FNW.
FloaterNorthWest is offline  
Old 14th Nov 2019, 12:13
  #18 (permalink)  
 
Join Date: Oct 1999
Location: Den Haag
Age: 57
Posts: 6,244
Received 330 Likes on 183 Posts
Originally Posted by alfasprite
We've been operating two new H145 T2's since early May and have had the same fuel indication issue on both aircraft throughout. The fuel amount for a full main tank has varied from as little as 677 kgs, up to a maximum of 712 kgs. Our Engineers have been working hard to figure out what the issue is. At first, it was thought it was the 'age old' 145/117 ball valve, slope of the ground issues etc. However, with both aircraft indicating the same main tank fuel amount after refuels on the same day, (within 1-2 kgs) the feeling was the issue was being caused by something else. After multiple defuels and refuels, where, by the amount supplied via a fuelling truck, they could guarantee that the tanks were full to the max possible (as stated in the RFM by Airbus), our engineers narrowed down the issue to being caused by a change in the specific gravity of the fuel being supplied to us. When the refuel company informed us that they were using a new batch of fuel, the fuel SG had changed when checked and the maximum amount indicated in both our aircraft main tanks changed too! The SG has varied from 0.775 up to 0.795. Airbus are aware of this issue elsewhere in the world and are sending out an engineer next week, to train our engineers on how to recalibrate the main tank fuel probes. We're told that airbus are working on a permanent fix?

Pain in the arse when you need a certain amount of fuel to be indicating on TEMPO days!

Hope this helps?
Ok, I’m going to stick my head above the parapet and look stupid, possibly, but where is the volume to weight calculation being done? I thought the capacitance probes simply send volume information, and the SG to weight calculations are done in the VEMD (same with fuel flow - metering valve position equals volume flow rate equals mass flow rate for an assumed SG).
212man is offline  
Old 14th Nov 2019, 14:16
  #19 (permalink)  
 
Join Date: Dec 2003
Location: The South
Age: 58
Posts: 517
Likes: 0
Received 4 Likes on 2 Posts
212man,

No VEMD on the D-2. The fuel algorithm for fuel mass is contained in the Helionix software within the AMCs.

FNW
FloaterNorthWest is offline  
Old 14th Nov 2019, 14:31
  #20 (permalink)  
 
Join Date: Oct 1999
Location: Den Haag
Age: 57
Posts: 6,244
Received 330 Likes on 183 Posts
Originally Posted by FloaterNorthWest
212man,

No VEMD on the D-2. The fuel algorithm for fuel mass is contained in the Helionix software within the AMCs.

FNW
ok, but supports my general query though, thanks
212man is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.