Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

"Why Robinson helicopters seem to have a bad habit of crashing"

Rotorheads A haven for helicopter professionals to discuss the things that affect them

"Why Robinson helicopters seem to have a bad habit of crashing"

Old 7th Mar 2019, 19:01
  #1 (permalink)  
Thread Starter
 
Join Date: May 2003
Location: The Wild West... and Oz
Posts: 866
Received 9 Likes on 2 Posts
"Why Robinson helicopters seem to have a bad habit of crashing"

Interesting recent article from New Zealand.

https://www.noted.co.nz/currently/so...abit-crashing/
BigMike is offline  
Old 7th Mar 2019, 21:17
  #2 (permalink)  
 
Join Date: Aug 2006
Location: Oop North
Posts: 158
Likes: 0
Received 22 Likes on 6 Posts
I've never flown teetering rotor, so I have no experience or knowledge on 'mast bumping'.

So, from my perspective, this design appears un-airworthy, if it is true that encountering turbulence can cause mast bumping leading to loss of control.

Can someone educate me?
Marly Lite is offline  
Old 7th Mar 2019, 22:04
  #3 (permalink)  
 
Join Date: Apr 2010
Location: USA
Posts: 850
Likes: 0
Received 0 Likes on 0 Posts
All two bladed, teetering designs are susceptible to mast bumping. UH-1, 206, R44, R22, makes no difference. Get into low or negative G's with these machines and those like them at your peril.

People like such machines because they are economical to build and operate, and require less storage space.

Clearly, being the smallest and lightest helicopters of this type, the R22 and R44 are going to be more susceptible to external conditions that could cause unwanted low-G conditions, i.e. it takes less turbulence to cause a problem in an R22 than in a 206 or UH-1. Similarly, the R22 and R44 will be more susceptible to ham handed pilots.



Last edited by aa777888; 7th Mar 2019 at 22:43.
aa777888 is offline  
Old 7th Mar 2019, 22:48
  #4 (permalink)  
 
Join Date: Dec 2017
Location: London
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Robbie bashing in 3-2-1 here we go again
FL020 is offline  
Old 7th Mar 2019, 23:02
  #5 (permalink)  
 
Join Date: Oct 2007
Location: A better place.
Posts: 2,319
Received 24 Likes on 16 Posts
Innocent question from fixed wing PPL who has had the odd pole around in an R-22 and even made a miserable attempt or two at hovering.
Is it possible to have a non-teetering two bladed main rotor?
If so, if Robinson wanted to change to that kind of rotor - would it require a fundamental re-design of the aircraft?
Rather than them simply being ****e - I thought the high rate of crashes in Robbies was due to a machine that was originally designed pretty much for point to point commuter type flying - being used by pilots in quite aggressive flight regimes - like hunting or stock herding at low level - which it's not suited to.
Low G flight, hard sharp turns or rapid reversals of direction etc.
tartare is offline  
Old 8th Mar 2019, 00:20
  #6 (permalink)  
 
Join Date: Sep 2018
Location: California
Posts: 751
Received 29 Likes on 25 Posts
Its the Indian, not the arrow.
Robbiee is offline  
Old 8th Mar 2019, 02:22
  #7 (permalink)  
 
Join Date: Apr 2010
Location: USA
Posts: 850
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by tartare
Innocent question from fixed wing PPL who has had the odd pole around in an R-22 and even made a miserable attempt or two at hovering.
Is it possible to have a non-teetering two bladed main rotor?
Not as far as I know. See also this explanation.
If so, if Robinson wanted to change to that kind of rotor - would it require a fundamental re-design of the aircraft?
People have often postulated a three-bladed, fully articulated Robinson rotor head. It would be a major redesign.
Rather than them simply being ****e - I thought the high rate of crashes in Robbies was due to a machine that was originally designed pretty much for point to point commuter type flying - being used by pilots in quite aggressive flight regimes - like hunting or stock herding at low level - which it's not suited to. Low G flight, hard sharp turns or rapid reversals of direction etc.
Only the low-g stuff is a problem. Other than that the machine is quite agile and really very fun to fly without ever putting it into a low-g state. Again, it's an issue of someone putting the machine into a situation that allows it to be in a low-g state. Don't do it advertently. As the article cited above said, use the right tool for the job. When it's 30 gust 50 out a two-bladed machine is probably not the best tool, and a lightweight two-bladed machine is an even worse choice. It's the inadvertent scenario which is the nightmare, say a sudden penetration into unexpected severe turbulence at speeds around max. cruise. Such scenarios are more likely in mountainous, windy conditions. Under such circumstances one must fly conservatively, with a good understanding of mountain winds, and be ready to slow down instantly in the event of turbulence.
aa777888 is offline  
Old 8th Mar 2019, 02:23
  #8 (permalink)  
 
Join Date: Sep 2002
Location: Great South East, tired and retired
Posts: 4,363
Received 203 Likes on 92 Posts
would it require a fundamental re-design of the aircraft?
Yes. The Robinsons were built to a price point, originally intended to cost $22,000.

The teetering head is hugely successful in the Robinsons and Bells. It can be sturdy, and is the simplest way to get a rotor head onto a helicopter. If you wanted to make it non-teetering, the price will rise considerably, mainly for the complexity and testing. It cannot have any movement in the lead/lag plane or the imbalance would tear it apart. It can have flapping freedom, and of course feathering. But in the decades of rotorhead development, nobody has made one successfully. Stick with the teeter and the wee-waa and the desire to stay alive with positive g.

This thread is named for the propensity for low-time pilots to take the R22 and others out of their design envelope, with resultant tears and gnashing of teeth.
Ascend Charlie is offline  
Old 8th Mar 2019, 03:48
  #9 (permalink)  
 
Join Date: Jun 2016
Location: Brantisvogan
Posts: 1,033
Received 57 Likes on 37 Posts
When it comes to 2-bladed helicopters, there is only one that continues to blame pilots for in-flight breakups, especially inexperienced pilots, yet many accidents have included people that don't fit the profile.
There is only one that puts notes in flight manuals to significantly reduce speed in turbulence.
One that publishes safety notices to remove controls so pax can't bump them and to shift blame to the pilot.
One that requires extra training to deal with the safety nuances.

They can be flown safely but the ability to leave the safe zone seems far too easy and doesn't end well.
When you build to a price you can't engineer out problems and the target market seem willing to accept the compromises mainly because they believe that accidents only happen to other people.
Will take an old JetBanger any day ahead of the alternative.
Bell_ringer is offline  
Old 8th Mar 2019, 11:06
  #10 (permalink)  
 
Join Date: Mar 2018
Location: Central UK
Posts: 1,608
Received 133 Likes on 63 Posts
Will take an old JetBanger any day ahead of the alternative.
What? Even with it's dangerous mast-bumping teetering head...?

Methinks there is more to Robbo accidents than the head design, somehow.
meleagertoo is offline  
Old 8th Mar 2019, 12:04
  #11 (permalink)  
 
Join Date: May 2002
Location: Downeast
Age: 75
Posts: 18,281
Received 491 Likes on 205 Posts
Lets put an end to this "Mast Bumping" is a Mortal Sin thing.....it is an issue for sure but then so is any number of other issues for other designs.

Take one look at the number of flight hours for the Bell 47, 204, 205, 212,214, including Military models all. using that style Rotor Head system....and I would suggest Mast Bumping is one of the least notable causes of accidents.

Yes...you can do yourself in if you allow the factors that cause Mast Bumping to occur....but there lies the central issue....the PILOT!

Robbies do the Mast Bumping thing because the tolerances are so much smaller than that on a Huey....and the same is true for the Bell 47 compared to the 212 or 214.

That tells me that one has to be far more judicious in choosing the conditions and manner one flies the Robbie than the larger better built aircraft.



Note: The US Army fleet of UH-1's accumulated almost Eight Million Flight Hours during the Vietnam War....and many of those same Huey's are still flying today in the Civilian Market.

Add the other militaries in the USA and around the world, and civilian operators and the total fleet hours are well beyond Ten Million Hours and counting.



That is not Robbie Bashing....that is just the plain ol' truth.

Since I am even thinking about Robbies....I shall go have a couple of double Cheeseburgers with a large order Fries (Chips) and a large Chocolate Milkshake.....to ensure I cannot fit through the door of a Robbie.


https://vtol.org/files/dmfile/50-52H...rdinkSO162.pdf
SASless is offline  
Old 8th Mar 2019, 12:18
  #12 (permalink)  
 
Join Date: Nov 2000
Location: White Waltham, Prestwick & Calgary
Age: 72
Posts: 4,144
Likes: 0
Received 29 Likes on 14 Posts
And wasn't the 206 the safest single-engined aircraft in the world at one time?
paco is offline  
Old 8th Mar 2019, 12:30
  #13 (permalink)  
 
Join Date: May 2002
Location: Downeast
Age: 75
Posts: 18,281
Received 491 Likes on 205 Posts
It was....and that included airplanes as well as helicopters.
SASless is offline  
Old 8th Mar 2019, 12:31
  #14 (permalink)  
 
Join Date: Apr 2000
Location: EGDC
Posts: 10,317
Received 622 Likes on 270 Posts
And although other helicopters can experience mast-bumping, only the Robbie has pitch horns that break under the strains of the flapping - that's if the blades haven't impacted the tail boom or the cockpit before that happens.
crab@SAAvn.co.uk is offline  
Old 8th Mar 2019, 13:01
  #15 (permalink)  
 
Join Date: Jun 2016
Location: Brantisvogan
Posts: 1,033
Received 57 Likes on 37 Posts
Adding the coning hinge for a little extra flapability was also a stroke of genius
Bell_ringer is offline  
Old 8th Mar 2019, 13:23
  #16 (permalink)  
 
Join Date: Apr 2010
Location: USA
Posts: 850
Likes: 0
Received 0 Likes on 0 Posts
From 2006 to 2016, looking at US data only, the NTSB records 67 fatals in Bells of all types, 66 fatals in Robinsons of all types. And we know that the fleet sizes are nearly equal in the US between the two makes. We don't know exactly how many hours each fleet does each year (but I would like to). So absent any reliable fleet hour data, if you are flying in the US it really doesn't matter if the name on the side starts with a "B" or an "R", except that it costs twice as much per hour to operate even the least expensive turbine machine, R66's included, and much more than that to operate something with at least four seats and at least three main rotor blades. At that level of cost differential, whether it's wholesale or retail, people will happily accept more risk to get in the sky in a helicopter. Except that the stat's say there really isn't any more risk one way or the other.

Now if you are flying in a country with a name that starts with "N" or "B", all bets are off!
aa777888 is offline  
Old 8th Mar 2019, 13:41
  #17 (permalink)  
 
Join Date: Jun 2016
Location: Brantisvogan
Posts: 1,033
Received 57 Likes on 37 Posts
a7&8, you keep raising this as means of a justification, and like I have pointed out previously, when those Robbies are flying HEMS, fire, police, agriculture and many of the other high risk activities then you may have a point.
Until then, Joe Soap flying from A to B and some occasional news coptering won't account for the similar fatalties, not withstanding the vast difference in seating capacity of the types.
Just waive the white flag and admit it is what it is - tin foil and some rivets held together with duct tape and bubblegum
Bell_ringer is offline  
Old 8th Mar 2019, 14:00
  #18 (permalink)  
 
Join Date: Apr 2010
Location: USA
Posts: 850
Likes: 0
Received 0 Likes on 0 Posts
Not giving in, BR. The same points could be made about the high risks of primary training and high risks of carrying around low time pilots, both primary missions for Robinsons. The case can be made that both fleets are engaged in higher risk activities, each unique to themselves.

And I still want to see some trustworthy fleet hour data. I'm beginning to suspect those numbers are either closely guarded secrets or just nobody is bothering to track them. If someone can show in a verifiable way that the Bell fleet is flying twice the hours of the Robinson fleet, then I'll go slink home with my tailboom between my legs. But not until then.
aa777888 is offline  
Old 8th Mar 2019, 14:41
  #19 (permalink)  
 
Join Date: May 2002
Location: Downeast
Age: 75
Posts: 18,281
Received 491 Likes on 205 Posts
From 2006 to 2016, looking at US data only, the NTSB records 67 fatals in Bells of all types, 66 fatals in Robinsons of all types.
A simple quote of a factoid is of zero value in any analysis or discussion.

Let me ask a few questions then you get back with us.

How many Robinson crashes occurred while doing EMS flights at night?

How many Robinson crashes occurred at Night doing Air Taxi flights?

How many Robinson crashes were pilot error in daylight operations within sight of the home airport (like training, etc.).

How many Robinson crashes occurred while carrying underslung loads to include Fire Fighting?

If you are going to throw out a simple number....that will not buttress your argument much at all.
SASless is offline  
Old 8th Mar 2019, 15:32
  #20 (permalink)  
 
Join Date: Sep 2018
Location: California
Posts: 751
Received 29 Likes on 25 Posts
The R44 is the best selling helicopter in the world, why? Because its more affordable (and has a back seat) to more people. Why is it more affordable? Because its light. The lighter the aircraft the more delicate you must handle it. Either accept this limitation, or go fly something else,...but stop your bitching!
Robbiee is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.