Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

Mont Blanc helicopter rescue

Rotorheads A haven for helicopter professionals to discuss the things that affect them

Mont Blanc helicopter rescue

Old 9th Jan 2019, 17:14
  #21 (permalink)  
 
Join Date: Jun 2006
Location: Texas
Posts: 157
Received 16 Likes on 11 Posts
Hero since it worked, zero if it had gone poorly.
Tango and Cash is offline  
Old 9th Jan 2019, 17:29
  #22 (permalink)  
 
Join Date: Dec 2016
Location: LSMD
Posts: 15
Likes: 0
Received 1 Like on 1 Post
I'm wondering about the clearance he estimated to have and actually had left with the rotortip... 10, 20 maybe 30 centimeters? If this is your comfortzone I'm impressed.
gazpad is offline  
Old 9th Jan 2019, 18:03
  #23 (permalink)  
 
Join Date: Jun 2016
Location: Brantisvogan
Posts: 1,033
Received 57 Likes on 37 Posts
Originally Posted by gazpad
I'm wondering about the clearance he estimated to have and actually had left with the rotortip... 10, 20 maybe 30 centimeters? If this is your comfortzone I'm impressed.
Mobile phone videos leave much to be desired when trying to guage perspective and depth.
It may look a lot worse than it is.
Probably too much to consider that the crew are professionals using their judgment.
Bell_ringer is offline  
Old 9th Jan 2019, 19:50
  #24 (permalink)  
 
Join Date: Apr 2000
Location: EGDC
Posts: 10,317
Received 622 Likes on 270 Posts
Probably too much to consider that the crew are professionals using their judgment.
There is no doubt about that nor that the flying is anything but skillful - is their decision to operate nose in when you have a winch justified though?

There is so little margin for error that a person with a hurty knee really doesn't justify the exposure of the aircraft and crew like that (nose-in) when a safer alternative is readily available.

if speed was of the essence - casualty bleeding out or needing CPR for example - then I might have a different opinion but there was no urgent lifesaving here.
crab@SAAvn.co.uk is offline  
Old 10th Jan 2019, 00:53
  #25 (permalink)  
 
Join Date: Apr 2008
Location: cape town
Posts: 61
Received 1 Like on 1 Post
May be they have the pointy things on the front of the skids to make it easier to judge if they will have clearance or not. If the top of the pointy thing is going to touch first then no but if the bottom or the whole thing then good to go. To me it looks like the driver has done this many times before and it's all in a days work. I fly a BK and my normal landings are slower than this, so I take my hat off to this guy. Beautiful, silky smooth piece of flying in my opinion.
bront is offline  
Old 10th Jan 2019, 01:37
  #26 (permalink)  
 
Join Date: Dec 2003
Location: Melbourne, Australia
Posts: 254
Received 16 Likes on 7 Posts
Amazing flying indeed! Are there sensors available much like parking sensors on cars which can indicate how close to something ahead the helicopter is?
Tickle is offline  
Old 10th Jan 2019, 03:26
  #27 (permalink)  
 
Join Date: Jun 2000
Location: UK
Posts: 231
Likes: 0
Received 0 Likes on 0 Posts
When the 'Proverbial *^"! hits the fan' as it eventually does... well lets say it will be messy.
NRDK is offline  
Old 10th Jan 2019, 05:15
  #28 (permalink)  
 
Join Date: Aug 1999
Location: Gold Coast, Australia
Age: 75
Posts: 4,379
Received 24 Likes on 14 Posts
Having done similar pick ups in the Australian Alps during searches in my BK I have little issue with the nose-in pickup, it was done smartly without fuss and IMO safely. It could be argued that a winch of three persons would expose the aircraft unnecessarily in the hover over hostile terrain for a longer period than it took for a stable hover pickup.

Picking at nits, I would prefer to see all on the hoist recovered into the cabin before leaving a hover. Let alone the spirited pedal turn and fly away as the double winch passes the skids; but that may be deemed acceptable by the operator and is only an observation from one who knows of fatals where the winch weight has separated from the winch and dropped too far to the surface.
John Eacott is offline  
Old 10th Jan 2019, 05:15
  #29 (permalink)  
 
Join Date: May 2010
Location: PNW
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts
I keep thinking about the granite boulder or rock face that might be just a few inches below the snow layer. On the other hand, without more context, it could be that this pilot knows the area very well and it's perfectly safe. One video isn't enough information.
Photonic is offline  
Old 10th Jan 2019, 05:25
  #30 (permalink)  
 
Join Date: Dec 2014
Location: Out West
Posts: 372
Likes: 0
Received 1 Like on 1 Post
Wonder if the crew did their HAPS checks, 3 H's and E's and were safe single engine throughout? Good job they are French and EASA rules do not apply ;-) If I had flown away over a drop of what looks like many 000's of ft with winchman and cas dangling on the wire there would have been an interesting debrief.
Same again is offline  
Old 10th Jan 2019, 06:32
  #31 (permalink)  
 
Join Date: Apr 2000
Location: EGDC
Posts: 10,317
Received 622 Likes on 270 Posts
It could be argued that a winch of three persons would expose the aircraft unnecessarily in the hover over hostile terrain for a longer period than it took for a stable hover pickup.
but an engine failure (or many other malfunctions) from a winching hover is easily managed with a gentle flyaway - not so from the nose-in position
crab@SAAvn.co.uk is offline  
Old 10th Jan 2019, 06:58
  #32 (permalink)  
 
Join Date: Dec 2016
Location: LSMD
Posts: 15
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Bell_ringer


Mobile phone videos leave much to be desired when trying to guage perspective and depth.
It may look a lot worse than it is.
Probably too much to consider that the crew are professionals using their judgment.
No doubts about the competence of the crew flying, it looks smooth and precise.

I agree it is difficult to estimate the clearance from the video!

What I read from the discussion is that a short contact of the the rotortip with an uncompacted soft snow surface doesnt necessarily stop the machine from flying as long as there are no rocks?

Regarding autopilot malfunction, do you leave the AP/SAS on for a maneuver like that?

Thanks for the insight from the professionals, I'm just a PPL student who gets nervous with less like 1.5 meters rotor clearance on my S300.

I'm still impressed like an amateur driver watching a racedriver taking a corner at three times my speed.
gazpad is offline  
Old 10th Jan 2019, 07:03
  #33 (permalink)  
 
Join Date: Sep 2002
Location: UKdom
Posts: 4
Likes: 0
Received 1 Like on 1 Post
Same Again; Police Ops and SAR are a State activity under EASA therefore CAT/SPO requirements need not apply. It’s only the UK that has a law about flying in accordance with CAT. So it’s nothing to do with been ‘French’.

I’d argue that the quicker option shown here is less exposure than prolonged high hovering? If any of you ski you will have seen a number of nose in rescues like this.

Its a steep slope to say the least; would you want to try and control a 120kg casualty on a stretcher down it to a flatter spot on skis/crampons with unknown snow depths? It’s hard work to say the least.
misterbonkers is offline  
Old 10th Jan 2019, 07:50
  #34 (permalink)  
 
Join Date: Apr 1998
Location: Mesopotamos
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Watch this over and over a few times and concluded that they've done it before many times as the execution was very good - and the weather was ideal for being on the piste.

Regarding losing an engine, I guess you can weigh the risk with the time spent in that configuration (less than a minute), I guess there would be more risk on a day like that of someone coming down the mountain for a look and not seeing the rotating bits.
cattletruck is offline  
Old 10th Jan 2019, 08:09
  #35 (permalink)  
 
Join Date: Apr 2016
Location: Europe
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
some facts on the operations here
with google translate

and "en francais" with 3 videos (skipped by google translate)

Last edited by Groquik; 10th Jan 2019 at 08:11. Reason: comment on the 3 missing videos
Groquik is offline  
Old 10th Jan 2019, 08:32
  #36 (permalink)  
 
Join Date: Apr 2000
Location: EGDC
Posts: 10,317
Received 622 Likes on 270 Posts
The nose of the helicopter is stuck to the snowy slope. The blades of the EC 145 of the gendarmerie graze the white coat.
That might be a little too close for comfort for some.

Two winching evolutions (a double lift and a single lift) to put the team down on the slope is hardly excessive exposure.
crab@SAAvn.co.uk is offline  
Old 10th Jan 2019, 09:00
  #37 (permalink)  
Thread Starter
 
Join Date: Jul 2003
Location: Brum
Posts: 852
Likes: 0
Received 1 Like on 1 Post
Now on the BBC with an interview with the pilot...
Nige321 is offline  
Old 10th Jan 2019, 09:24
  #38 (permalink)  
 
Join Date: Dec 2000
Location: uk
Posts: 1,659
Received 1 Like on 1 Post
Originally Posted by gazpad
No doubts about the competence of the crew flying, it looks smooth and precise.

I agree it is difficult to estimate the clearance from the video!

What I read from the discussion is that a short contact of the the rotortip with an uncompacted soft snow surface doesnt necessarily stop the machine from flying as long as there are no rocks?

Regarding autopilot malfunction, do you leave the AP/SAS on for a maneuver like that?

Thanks for the insight from the professionals, I'm just a PPL student who gets nervous with less like 1.5 meters rotor clearance on my S300.

I'm still impressed like an amateur driver watching a racedriver taking a corner at three times my speed.

My worry with your statement is that you're happy for less than a 1.5m rotor tip clearance as a PPL. As an ATPL I wouldn't use 1.5m as a comfortable clearance unless doing a job like the above. But seriously, you might want to revise your clearance figures upwards somewhat. I hope you never have a blade contact with anything as your insurer will have a field day after reading your comment above. Just saying. As for AP, yes they'll be in use with SAS im sure.
helimutt is offline  
Old 10th Jan 2019, 10:15
  #39 (permalink)  
 
Join Date: Dec 2016
Location: LSMD
Posts: 15
Likes: 0
Received 1 Like on 1 Post
Smile

Originally Posted by helimutt
My worry with your statement is that you're happy for less than a 1.5m rotor tip clearance as a PPL. As an ATPL I wouldn't use 1.5m as a comfortable clearance unless doing a job like the above. But seriously, you might want to revise your clearance figures upwards somewhat. I hope you never have a blade contact with anything as your insurer will have a field day after reading your comment above. Just saying. As for AP, yes they'll be in use with SAS im sure.
Thank you for your answer.

My happiness with clearance starts to go down actually around 4-5m. As soon as I get closer than 2-3m to anything with my rotor, I feel the severe urge to fly away from it. At 1.5m I would be probably already in deep panic.
This is for a calm wind day. With some wind or even worse with gusts my panic might as well start at 4-5 meters, impairing how smooth my control inputs are. Of course I hope to never have blade contact with anything as well.
gazpad is offline  
Old 10th Jan 2019, 10:24
  #40 (permalink)  
 
Join Date: Mar 2005
Location: N/A
Posts: 5,926
Received 391 Likes on 206 Posts
Isn't it wonderful how we jump in criticising a crew without having the facts that prompted them to act as they did.
megan is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.