Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

EC225 crash near Bergen, Norway April 2016

Wikiposts
Search
Rotorheads A haven for helicopter professionals to discuss the things that affect them

EC225 crash near Bergen, Norway April 2016

Thread Tools
 
Search this Thread
 
Old 29th Apr 2016, 22:13
  #81 (permalink)  
 
Join Date: Nov 2014
Location: Yonder
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Daylite
Speaking with chc technical department, it now seems the gearbox in the aircraft was only changed yesterday.
CHC are saying that it was changed in January:

http://uk.reuters.com/article/us-norway-crash-idUKKCN0XQ15K
Innit is offline  
Old 29th Apr 2016, 22:15
  #82 (permalink)  
 
Join Date: Sep 2005
Location: Montreal
Posts: 714
Received 13 Likes on 10 Posts
Any ATC transcript?
malabo is online now  
Old 29th Apr 2016, 22:21
  #83 (permalink)  
 
Join Date: Dec 2013
Location: Norfolk
Age: 67
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
electrotor
I stand corrected in my use of loose terminology. Perhaps it would have been more correct to state that the weight of the aircraft is primarily supported by the top bearing in the gearbox casing and as has been previously demonstrated, it is possible for the rotor shaft to pull through the bearing and depart given certain fault conditions.

This accident bears remarkable similarities to the G-REDL incident where the main rotor also departed from the helicopter. I would not be surprised if a similar failure mechanism was found. Height at which the incident occured is almost identical and apparently there was no warning before the main rotor broke away.
G0ULI is offline  
Old 29th Apr 2016, 23:02
  #84 (permalink)  
 
Join Date: Jun 2011
Location: n.ireland
Posts: 48
Likes: 0
Received 1 Like on 1 Post
I wonder did anyone monitor the last radio transmissions to see if the pilot issued a Mayday alert as was the case for G-REDL in 2009 when metal particles in the gearbox caused it to fail and shear the rotor head.
bille1319 is offline  
Old 30th Apr 2016, 00:22
  #85 (permalink)  
 
Join Date: May 2011
Location: NEW YORK
Posts: 1,352
Likes: 0
Received 1 Like on 1 Post
Helicopters have some graceless failure modes.
Should there be a provision for an emergency parachute, such as offered on some light aircraft, or is that impracticable for this size vehicle?
etudiant is offline  
Old 30th Apr 2016, 00:28
  #86 (permalink)  
 
Join Date: Sep 2000
Location: Asia Pacific.
Posts: 206
Received 0 Likes on 0 Posts
MR imbalance

Blades all look attached, however if a blade failed in the driving region and separated...
What-ho Squiffy! is offline  
Old 30th Apr 2016, 00:38
  #87 (permalink)  
 
Join Date: Nov 2009
Location: Inverness-shire, Ross-shire
Posts: 1,459
Received 23 Likes on 17 Posts
Originally Posted by JohnDixson
... so what were the 5 maintenance flights for? I made the assumption they were MTF's because Jimf671 wrote that they were short. ...
That was from flightradar24. There are some anomalies in the way that flightradar24 records flights but looking at the detail there is definitely a record of 3 short flights that are 13 to 16 minutes long and are circuitous around local fjord and nearby islands. The first is 1129h 26th, second 0643h 27th, third 1224h 27th. The first has a routine flight number and so may be a RTB after normal departure. No other flights are shown during that 25 hour period.
jimf671 is offline  
Old 30th Apr 2016, 02:13
  #88 (permalink)  
 
Join Date: Mar 2007
Location: Hobe Sound, Florida
Posts: 950
Received 33 Likes on 27 Posts
Next Theory

Jim, with the gearbox change being accomplished in January, it looks like it's time to wait for the sharp eyes to look at what came down with the rotor head and how/where it failed structurally, as well as determining what, if anything, the main blades hit prior to the head separation. Time for the accident investigation pro's and the OEM design/test people to look at the evidence. Still would be of interest to know what the short flights were all about.
JohnDixson is offline  
Old 30th Apr 2016, 03:03
  #89 (permalink)  
 
Join Date: Nov 2010
Location: Canada
Posts: 132
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by JohnDixson
Jim, with the gearbox change being accomplished in January, it looks like it's time to wait for the sharp eyes to look at what came down with the rotor head and how/where it failed structurally, as well as determining what, if anything, the main blades hit prior to the head separation. Time for the accident investigation pro's and the OEM design/test people to look at the evidence. Still would be of interest to know what the short flights were all about.
HUMS parameters just beyond limits? Couple 'quick fixes' to get it within limits perhaps. Who knows.
MLHeliwrench is offline  
Old 30th Apr 2016, 03:08
  #90 (permalink)  
 
Join Date: Nov 2009
Location: Inverness-shire, Ross-shire
Posts: 1,459
Received 23 Likes on 17 Posts
It is what it is and it's out there on a public website. What it means is for the professional head scratchers.
jimf671 is offline  
Old 30th Apr 2016, 03:39
  #91 (permalink)  
 
Join Date: May 2009
Location: Ontario
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
For what it is worth.

SEIFR is offline  
Old 30th Apr 2016, 04:23
  #92 (permalink)  
 
Join Date: Feb 2005
Location: On the green bit near the blue wobbly stuff
Posts: 674
Likes: 0
Received 1 Like on 1 Post
ETUDIANT - Think about where you would mount the parachute on a light aeroplane ....- away from the rotating parts, so whether the chute is deliberately or inadvertently deployed, it can work without interference.
I cant think where you could mount a safety parachute on a helicopter where it is not going to cause a catastrophic failure if inadvertently deployed, and where it is going to be unimpeded by rotating parts if you want to deliberately deploy it (in all circumstances except complete detachment of the main rotor head, which remains an extremely rare occurrence)
So - chutes are a fairly impractical proposition for helicopters.
Non-PC Plod is offline  
Old 30th Apr 2016, 04:51
  #93 (permalink)  
 
Join Date: Oct 2008
Location: Everywhere
Posts: 512
Received 4 Likes on 2 Posts
How about under a suitable faired structure where the 'chinamans hat" is currently atop the jesus nut?

CC
Checklist Charlie is offline  
Old 30th Apr 2016, 05:25
  #94 (permalink)  
 
Join Date: May 2001
Location: UK
Posts: 312
Received 1 Like on 1 Post
How about under a suitable faired structure where the 'chinamans hat" is currently atop the jesus nut?

CC
For F*cks sake! That is the stupidest post I have seen in a long time.
roundwego is offline  
Old 30th Apr 2016, 05:40
  #95 (permalink)  
 
Join Date: Oct 2008
Location: Everywhere
Posts: 512
Received 4 Likes on 2 Posts
Thanks for your informative input.

CC
Checklist Charlie is offline  
Old 30th Apr 2016, 05:45
  #96 (permalink)  
 
Join Date: Aug 2003
Location: LOS
Age: 67
Posts: 580
Likes: 0
Received 0 Likes on 0 Posts
Having just watched the video above and I realize I'm asking for speculation, but seeing the video of the rotor head falling and the still pictures would we assume that it failed where the bevel gear is welded to the m/r shaft?
Outwest is offline  
Old 30th Apr 2016, 05:52
  #97 (permalink)  
 
Join Date: Feb 2009
Location: A nice place
Posts: 160
Likes: 0
Received 0 Likes on 0 Posts
On the EC225 all lift forces are transmitted to the airframe via the bearing housing of the MRH mast not the MGB. 3 suspension bars transmit the lift forces from the mast to the airframe. One of the suspension bars can be clearly seen in the photograph of the detached MRH.
Pablo332 is offline  
Old 30th Apr 2016, 06:03
  #98 (permalink)  
 
Join Date: Aug 2003
Location: LOS
Age: 67
Posts: 580
Likes: 0
Received 0 Likes on 0 Posts
OK, so which actual part would fail that would cause such a clean (relatively) break that would allow the entire rotor head and blades to depart seemingly undamaged.

Again....realizing that it would be speculation, but from someone who has knowledge of how the system is designed ( I'm not an EC/Airbus guy)
Outwest is offline  
Old 30th Apr 2016, 06:20
  #99 (permalink)  
 
Join Date: Dec 2008
Location: Top of the World
Posts: 2,191
Likes: 0
Received 25 Likes on 25 Posts
Rest in Peace Passengers & Flight-Crew, another very sad day in the Rotory World
Vertical Freedom is offline  
Old 30th Apr 2016, 06:31
  #100 (permalink)  
 
Join Date: Jan 2008
Location: Reading, UK
Posts: 15,810
Received 199 Likes on 92 Posts
Originally Posted by Outwest
OK, so which actual part would fail that would cause such a clean (relatively) break that would allow the entire rotor head and blades to depart seemingly undamaged.
The fact that the main rotor has been recovered more or less intact should mean that the cause of the failure gets established pretty quickly. I wouldn't be surprised if we see an AD within the next few days.
DaveReidUK is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.