Emergency landing
Thread Starter
Join Date: Dec 2015
Location: india
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Emergency landing
If in an emergency close to a airfield one is forced to land what is better, the main runway or the foward speed landing area which is grassy but plain surface.
Which one to choose if adequate length is avaliable on both surfaces???
Which one to choose if adequate length is avaliable on both surfaces???
Thread Starter
Join Date: Dec 2015
Location: india
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
what i ment was if iam at the airport.
emergency on board and want to carry out a foward speed landing with an aircraft fitted with skids.
what to do go for runway or grassy patch next to it.
both of the same length and clear of obstructions
emergency on board and want to carry out a foward speed landing with an aircraft fitted with skids.
what to do go for runway or grassy patch next to it.
both of the same length and clear of obstructions
Join Date: Apr 2007
Location: Center of the Universe
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
You slide better on tar/concrete
Purveyor of Egg Liqueur to Lucifer
I would have thought taxiway lighting to be more of an issue than runway grooves and bearing in mind the width differences, surely a runway would be a better choice than a taxiway. Having run 'there and back' along the runway of an international airport during the volcanic ash episode, I would conclude that one must have extremely thin skids for any runway grooving to be considered hazardous.
Whilst the OP later explains he is referring to a skid helicopter, there are multiple scenarios which could dictate either option.
A skid machine generally has plates under the skid to allow for running along a sealed surface, which can (& does!) leave significant surface damage to a runway seal. Does the emergency landing warrant this?
How large is the helicopter, what is the emergency, how far is it likely to slide? Shortest run-on is likely to be a limited power approach, eg single engine failure on a multi. Longest; maybe a tail rotor failure of some sort. For a short run on then take a firm and level grass and leave the runway clear. Longer run for a T/R failure make a judgement call, but I'd lean toward a runway as a more forgiving surface to an off-centre touchdown.
Then there are the wheeled machines and their foibles, most of which would dictate a better sealed surface.
But as already mentioned, that seal doesn't have to be a runway. It could just as easily be a taxiway or even a clear parking area, especially if there is a significant crosswind on the only available runway. The same holds true of a skid run-on landing on grass, lessening the crosswind issues of going for a seal.
Since the OP is from India there could be further considerations dictated by local norms and requirements?!
Edit to add: never, ever, let the considerations of other operations influence a safety call in an emergency. It should be of no consideration that other serviceable aircraft may need to divert when assessing the safest way of getting yourself and your crew or passengers away from the landed aircraft in one piece.
A skid machine generally has plates under the skid to allow for running along a sealed surface, which can (& does!) leave significant surface damage to a runway seal. Does the emergency landing warrant this?
How large is the helicopter, what is the emergency, how far is it likely to slide? Shortest run-on is likely to be a limited power approach, eg single engine failure on a multi. Longest; maybe a tail rotor failure of some sort. For a short run on then take a firm and level grass and leave the runway clear. Longer run for a T/R failure make a judgement call, but I'd lean toward a runway as a more forgiving surface to an off-centre touchdown.
Then there are the wheeled machines and their foibles, most of which would dictate a better sealed surface.
But as already mentioned, that seal doesn't have to be a runway. It could just as easily be a taxiway or even a clear parking area, especially if there is a significant crosswind on the only available runway. The same holds true of a skid run-on landing on grass, lessening the crosswind issues of going for a seal.
Since the OP is from India there could be further considerations dictated by local norms and requirements?!
Edit to add: never, ever, let the considerations of other operations influence a safety call in an emergency. It should be of no consideration that other serviceable aircraft may need to divert when assessing the safest way of getting yourself and your crew or passengers away from the landed aircraft in one piece.
Join Date: Nov 2000
Location: White Waltham, Prestwick & Calgary
Age: 72
Posts: 4,149
Likes: 0
Received 29 Likes
on
14 Posts
In North America it is routine to do emergency landings on the hard standing, even for practice. Too many potential gopher/rabbit holes in grass. Just be careful about how quickly you put the collective down for the braking action
Phil
Phil
Join Date: Jun 2013
Location: Thaïland
Age: 67
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
In France...Inverse, most of the time, we landing on the grass: is smoothly and so quiet...
I make my first full R44 autorotation in Torrance on the runway. The concrete runway is so noisy.....
I make my first full R44 autorotation in Torrance on the runway. The concrete runway is so noisy.....
Join Date: Jul 2007
Location: Canada
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
This is all about risk management
ALWAYS choose the hard surface.
Skids: Get sideways in the grass you and might tip over.
Wheels: Same idea.
Wheels on pavement: Nose dragger it will kick straight. Tail dragger you can pedal it straight.
Important thing is, tipping over is much less likely to happen on a hard surface.
And don't worry about grinding the skids (or wheels) - we can always buy new ones
Skids: Get sideways in the grass you and might tip over.
Wheels: Same idea.
Wheels on pavement: Nose dragger it will kick straight. Tail dragger you can pedal it straight.
Important thing is, tipping over is much less likely to happen on a hard surface.
And don't worry about grinding the skids (or wheels) - we can always buy new ones
Join Date: Jul 2007
Location: Canada
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
What John said
Edit to add: never, ever, let the considerations of other operations influence a safety call in an emergency. It should be of no consideration that other serviceable aircraft may need to divert when assessing the safest way of getting yourself and your crew or passengers away from the landed aircraft in one piece.
In my 4000 odd (european) civ and mil rotary hrs I have never once done a run on landing of any kind on a hard surface on skids, nor heard of anyone that did by choice except in the case of some (but by no means all) tail rotor failures as described by John Eacott. On wheeled aircraft we used the tarmac of course. Can't really imagine why you'd want to wear your skid plates away on a runway or mix it in the circuit with the siezed-wings when you have smooth, slippery grass all to yourself.
Never had any concern about "tipping over" on grass nor felt it likely to happen, largely because it isn't, as millions of European training hours have proved.