lets have a sit down, shall we??
Thread Starter
Join Date: Nov 2004
Location: the great white north
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
lets have a sit down, shall we??
so recently, i observed a collegue sitting on top of the rotorhead of an AS350. i thought that it was an odd, even an uncomfortable spot to sit...
personal opinions aside; from an engineering point of view, would this be harmful to the mast bearing/rotor system? i might be just a pilot but i thought that the design was meant more to suspend weight rather than support (extra) weight.
any thoughts? i'd like to know as eventually i will have to fly that aircraft.
TIA
fp
personal opinions aside; from an engineering point of view, would this be harmful to the mast bearing/rotor system? i might be just a pilot but i thought that the design was meant more to suspend weight rather than support (extra) weight.
any thoughts? i'd like to know as eventually i will have to fly that aircraft.
TIA
fp
If you consider the existing weight of the mast and blades on the lower components then I dont think there is an issue.
How much load/shock would there be in a bouncy landing?
How much load/shock would there be in a bouncy landing?
Join Date: Dec 2006
Location: Here and there...
Age: 58
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
Aside from the risk of falling off and denting the bodywork on the way down, I'd say there's no problem with it. If you consider the loads the mast and transmission absorb in a turn or flare then the weight of a guy sat on the head becomes low.
I'd be worried if he was sitting on the blades outboard of the spindles.
I'd be worried if he was sitting on the blades outboard of the spindles.
Thread Starter
Join Date: Nov 2004
Location: the great white north
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys,
i am sure the designers accounted for the weight of the rotor system pressing down statically (and even low negative G's) but to have that extra weight up there...?
also, in a turn or flare wouldn't the loads increase in the direction of the blades rather than the skids?
and yes, damage to the cowls etc had occurred to me as did falling off, but in those cases the individual would likely have to fess up if either damage occurred or he hurt himself.
fp
i am sure the designers accounted for the weight of the rotor system pressing down statically (and even low negative G's) but to have that extra weight up there...?
also, in a turn or flare wouldn't the loads increase in the direction of the blades rather than the skids?
and yes, damage to the cowls etc had occurred to me as did falling off, but in those cases the individual would likely have to fess up if either damage occurred or he hurt himself.
fp
I don't know how you could make a shaft and head so strong as to be able to pull G in one direction yet be damaged by somebody sitting in it putting some additional weight in the other direction. The bearings won't care. Sure the shaft is loaded in compression rather than tension but how do those loads compare to the shaft under bending when cyclic is applied? They are minuscule. There are better things to worry about.
Bryan
Bryan
"Just a pilot"
Sit on the head itself? No problem.
Sitting on the assembly covering the head, centering springs and dampening weight itself, is another question. Unless all the weight is born by the lifting eye...
Join Date: Jun 2010
Location: Germany
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Of course when they bring in new rules governing the limits on size for offshore passengers to fit through a window, atop the rotorhead might be the only option for some
Sitting on a rotorhead is a very lonesome place to be.
No room for small talk with other pilots (sitting on other rotorheads of other machines dozens of meters away).
No room for the lunch box.
But still: Great views from there...
at least until John R81 lights the fire
Join Date: Jun 2008
Location: England & Scotland
Age: 63
Posts: 1,413
Likes: 0
Received 0 Likes
on
0 Posts
"Come on baby, light my fire...."
[Add your own music - work with me! Work with me! ]
Actually, "Crank" will spool the motor but not provide fuel so it won't light. Three things will happen:
1. The motor will spool a little and sound like a start;
2. The rotors will move a little, giving Chappie a fright; and
3. A small amount of poo will escape the confines of Chappie's internals
[The fourth thing will be major damage to the blades and to Chappie as he falls off, but difficult to see the humour in that part so I ignored it]
[Add your own music - work with me! Work with me! ]
Actually, "Crank" will spool the motor but not provide fuel so it won't light. Three things will happen:
1. The motor will spool a little and sound like a start;
2. The rotors will move a little, giving Chappie a fright; and
3. A small amount of poo will escape the confines of Chappie's internals
[The fourth thing will be major damage to the blades and to Chappie as he falls off, but difficult to see the humour in that part so I ignored it]
Thread Starter
Join Date: Nov 2004
Location: the great white north
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
i will have to think about it as i don't know what a blow turbine is and i consider myself fortunate to not have to know anything about the 206.
fp
fp
Join Date: Sep 2006
Location: Canada
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
1)Simply put a short sling around one of the blade!
(aprox 2.5ft from the blade bolt)
2)hook a chainbock to the sling (small 1/2t is more than anough)
3)hook the chainside hook to the eyeloop bolt of the engine
4)run the chainblock until maximum up
5)then have someone pull gently the other blade down (SEESAW)this will lift the engine out of frame mount
6)turn the rotor to clear the engine compartement
7)run down the chainblock until the engine can reach the work stand
this description is highly simplistic!
So do not worries about weight (the 206 head+blade weight almost 350lb)
Simply think that all mecanical gizmo upthere can sustand the weight of the machine+++add the G' so you are talking probably about TOn's of traction on the head!
I have a photo some were if i ca find it i will paste it hire!
Guy
Sorry english is not my first language!
p.s.
the 206 is one of safest flying machine in the world i do not understand why you seem to be worried about it!(((i consider myself fortunate to not have to know anything about the 206.)))
Surely not the best confortable but it is the CHEVY of the helicopter!
(aprox 2.5ft from the blade bolt)
2)hook a chainbock to the sling (small 1/2t is more than anough)
3)hook the chainside hook to the eyeloop bolt of the engine
4)run the chainblock until maximum up
5)then have someone pull gently the other blade down (SEESAW)this will lift the engine out of frame mount
6)turn the rotor to clear the engine compartement
7)run down the chainblock until the engine can reach the work stand
this description is highly simplistic!
So do not worries about weight (the 206 head+blade weight almost 350lb)
Simply think that all mecanical gizmo upthere can sustand the weight of the machine+++add the G' so you are talking probably about TOn's of traction on the head!
I have a photo some were if i ca find it i will paste it hire!
Guy
Sorry english is not my first language!
p.s.
the 206 is one of safest flying machine in the world i do not understand why you seem to be worried about it!(((i consider myself fortunate to not have to know anything about the 206.)))
Surely not the best confortable but it is the CHEVY of the helicopter!
Firestarter
John R81,
Add your own music:
Prodigy Firestarter
When you consider this thread drift, then see this as a small counter balance to the current content of the thread "It's time to show your age, Rotorheads"
SLB
Add your own music:
Prodigy Firestarter
When you consider this thread drift, then see this as a small counter balance to the current content of the thread "It's time to show your age, Rotorheads"
SLB
Last edited by Self loading bear; 9th Jul 2014 at 19:13. Reason: link again