Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

AS332L Tech Info Req'd

Wikiposts
Search
Rotorheads A haven for helicopter professionals to discuss the things that affect them

AS332L Tech Info Req'd

Thread Tools
 
Search this Thread
 
Old 20th Dec 2007, 07:31
  #1 (permalink)  
Thread Starter
 
Join Date: Dec 2007
Location: New Zealand
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
AS332L Tech Info Req'd

Probably should post this on the Engineering Forum but will take a punt on here first.

Does anyone happen to know the pedal pressure required (kgs or lbs) for full deflection of pedals and compression of toe brakes on the Puma (LHS)? I had an accident a few years ago when some rotor debris customised my leg and I'm in the process of trying out some new physio/muscle strengthening on my streamlined limb. It would be interesting to see how far off the mark I am.

Any advice or information appreciated
Farsmaleg is offline  
Old 21st Dec 2007, 02:50
  #2 (permalink)  
 
Join Date: Oct 1999
Location: Den Haag
Age: 57
Posts: 6,267
Received 336 Likes on 188 Posts
Join Bristow: they opted not to install toe brakes in the LHS

Sorry, can't help with the figures, but puts it back to the top. Good luck with the physio!
212man is online now  
Old 21st Dec 2007, 07:37
  #3 (permalink)  
 
Join Date: Dec 2000
Location: uk
Posts: 286
Received 8 Likes on 7 Posts
Have you tried contacting Eurocopter themselves, they might have those figures as part of the certification process? Otherwise if there is an easy way of measuring this maybe call to an operator of these aircraft might get you these figures.

Good luck with the physiotherapy!

Greetings,

Finalchecksplease
finalchecksplease is offline  
Old 21st Dec 2007, 14:26
  #4 (permalink)  
 
Join Date: Dec 1999
Location: Aberdeen.
Posts: 118
Likes: 0
Received 0 Likes on 0 Posts
Farsmaleg,

Good to hear from you! Having just had my ankle out of plaster I'd reckon if you can drive a manual car with a heavy clutch you'd be ok in a puma but no idea what the kg/lb values would be. I seem to recall it was your left leg so just go and change a few gears. If it was your right leg the biggest difficulty will be getting in and out of the cockpit.

I always found your meccano leg quite fascinating but I'm a bit odd like that!! I'll pm in the new year to catch up properly. Good luck.
Blind is offline  
Old 21st Dec 2007, 14:46
  #5 (permalink)  
 
Join Date: Dec 2004
Location: PARIS
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
foot control forces

You have a first answer in the certification standards: in the FAR 29.397 (limit pilot forces and torque), it is said: for foot control: 130 lbs
see: http://ecfr.gpoaccess.gov/cgi/t/text...329.14&idno=14
Good luck !
helirider is offline  
Old 23rd Dec 2007, 07:36
  #6 (permalink)  
Thread Starter
 
Join Date: Dec 2007
Location: New Zealand
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Thanks from the Soutern Hemisphere

Appreciate that, thanks. I'll track down the information eventually. Tried Eurocopter and CHC Engineering but no response as yet.

Meccano set has long since gone and now sporting a leg that looks like a half eaten pasty. I may never dance in tights again!

Look forward to hearing from you.

All the best and thanks to all who responded.
Farsmaleg is offline  
Old 23rd Dec 2007, 08:16
  #7 (permalink)  
 
Join Date: Jun 2007
Location: UK
Posts: 71
Likes: 0
Received 0 Likes on 0 Posts
Pedal pressure in normal flight is not very heavy, as Blind says, 'If you can drive a manual car...etc'. However, a Puma with an autopilot hydraulics failure is something different, the pedal pressure is very heavy and it is required on a base check (OPC, VBC whatever you want to call it) that you demonstrate your ability to land the aircraft in this configuration. I would suggest that this is the pressure you should try an ascertain. Sadly I can't help you with that one as I don't know what value it is, but I would think it's very close to those that Helirider pointed you towards.
Hope this helps, I wish you all the best with your recovery.
Brom.
Brom is offline  
Old 23rd Dec 2007, 10:05
  #8 (permalink)  
Thread Starter
 
Join Date: Dec 2007
Location: New Zealand
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Thanks Brom. I remember that 'jelly leg' feeling after my first OPC and wanted to make sure I can hit those figures before I put myself forward.

Thanks for the response.
Farsmaleg is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.