Accelerate stop distance required
 

My Cessna Citation charts provide me with V1 speed but nowhere can I find accelerate stop distance required. Is takeoff distance required computed as ASDR ? I think not since it provides me with distance to screen hight of 35feet. Why would Cessna omit ASDR charts ? As a pilot I would like to know not only my V1 but ASDR esspecially on short runways. And since they came up with V1 it must be based on some required accelerate stop distance....right ? Or am I just confused.....Any help would be greatly appreciated.

- because you do not need them! You have no real way of judging how many ft/mtrs you have left at the time the engine goes bang so what use are they to you? V1 is all you need and Cessna worry about the rest.

Now can you tell us - pilot or simmer?

BOAC - I can think of one good reason somebody might wish to know their ASDR.........

If you know your ASDR then you know whether the stop end RVR needs to be accounted for when taking off in LVP's:ok:

Darius - don't know I'm afraid, however apart from what I have written above, BOAC is quite correct, there's no other good reason that I can think of to know your ASDR.

Have a look at his profile... Age: 16. I guess the question is answered. ;)

BOAC - V1 should ensure that I can accelerte to decision speed then stop within ASDA which is the worst case scenario. So Cessna must assume certain safe distance exists if I can accelerate to lets say 100kts and then be able to stop within runway environment. As a pilot am I to believe blindly that if I decide at 100kts to stop on a 4000ft runway everything will be ok ...and how about 3000ft or 2000ft long runway ....still V1 at 100kts ? Thats insane ! My charts only consider weight and field elevation with no runway consideration whatssoever. I need to know how much distance I will need to stop at V1 !

Is there someone who knows aswer to this question ?

Darius please let us know what you are before we spend time on this.

It is SSG...

Yes - we tried this before,but 'he' claimed not to be 16. Suggest we ignore?

Your Cessna charts must give a field length for the weight, pressure altitude and temp. That is balanced and as long as you have begun the first action to stop OR have continued the take-off, you will be stopped at that distance or 35' in the air. Cessna, like other business jet operators, does not provide all the charts because no one wants to pay for them, nor do most corporate operators want to do the performance engineering.


BOAC, now I returned and saw your post--QUITE AGREE.

Oh no, not again!

http://www.pprune.org/questions/4723...ght-plane.html

http://www.pprune.org/tech-log/47247...ml#post6919010

gallaxy flyer - for a long time that was my assumption as well that Cessna providing required takeoff distance includes ASDR in its computation but recently came to conclusion that this is not so. Assume you accelerate to Vr which happens to be V1 as well and then you decide to aboard. There is no way in this world you will convince me that distance it takes to climb just 35 feet from that rotation point is the same as stopping fully loaded plane from such high speed. It takes me perhaps (Im guessing) 3 seconds to climb to 35 feet. So you try to convince me I will stop in approximately the same time ? No way my friend !

So you are telling us that you usually conduct single engine takeoff from V1 in the actual aircraft....... interesting :{:{:{:{

Just to make sure that we are on the same wavelength, would you like to explain to us what BALANCED FIELD means?

If you dont believe us, why dont you contact Cessna directly, give them your tailnumber and have them explain the concept to you, or Flight Safety, CAE etc.

Mutt

Troll

A professional pilot would not abort at V1 - the decision is already made to continue at this speed.

Assuming you did abort at or after V1' the handling performance of the aircraft would depend upon whether it's modelled upon Microsoft FS or X-Plane. Maybe get yourself a set of USB rudder pedals to help keep straight?

V1 and accelerate stop distance required !
 

I have tried somewhere else to post this question to no avail so will repost here hoping that someone can help me aswer it. For a long time my assumption was that Cessna Citation providing required takeoff distance includes ASDR in its computations but recently came to conclusion that this is not so. Lets assume I accelerate to Vr which happens to be V1 as well and then decide to aboard. There is no way that distance it takes to climb just 35 feet (screen height used for takeoff distance computation) from that rotation point is the same as stopping fully loaded plane from such high speed. It takes me perhaps (Im guessing) 3 seconds to climb to 35 feet. So how can I stop in approximately the same time ? So when takeoff charts tell me I need 3000ft takeoff distance it is based on performance to 35feet and can not include any computation for V1. For takeoff computation all I need is pressure and temp. and runway length does not even come into consideration. So what assurance do I have when aboart at V1/Vr point I will have enough distance to stop. Any help would be greatly appreciated !

Am I reading from the wrong website? :eek:

Or is this PSRuNe?

It seems that for all these years I have "faithfully" used V1, but some new genius in aeronautics is getting all my beargins wrong! :E

After some research I have found the answer. Just as I expected actual takeoff distance to 35feet screen height would not have allowed safe stopping distance in case aboart was initiated at decision speed/rotation speed. What Cessna has done is to combine three different computations:

accelerate-stop distance
accelerate go with single engine to 35ft distance
and two engine takeoff distance multiplied by 115%

Longest distance of the three of those cases was given as takeoff distance.

Unfortunatly Cessna does not explain that by takeoff distance tables assuming correctly that most will follow blindly never considering that actual takeoff distance would never allow to stop in case of V1/Vr cut.

Hope someone will find this usefull !

After some research I have found the answer. Just as I expected actual takeoff distance to 35feet screen height would not have allowed safe stopping distance in case aboart was initiated at decision speed/rotation speed. What Cessna has done is to combine three different computations:


accelerate-stop distance
accelerate go with single engine to 35ft distance
and two engine takeoff distance multiplied by 115%


Longest distance of the three of those cases was given as takeoff distance.

Unfortunatly Cessna does not explain that by takeoff distance tables assuming correctly that most will follow blindly never considering that actual takeoff distance would never allow to stop in case of V1/Vr cut.

Hope someone will find this usefull !

I'm lazy so Im just going to report Brian Abrahams reply to the same statement from Darisuzm in the Tech Forum....

Thanks Brian :ok::ok::ok:

You'll need to explain that analysis. I suggest it's rubbish. Only have CJ3 & 4, and they are both the same format, so it would surprise me if the 2 were any different.

http://i101.photobucket.com/albums/m...am227/z054.jpghttp://i101.photobucket.com/albums/m...am227/z053.jpg

On both the 3 & 4 V1 never equals Vr, and I'll bet the 2 doesn't either.

I'd say you have little understanding of what the charts are saying, and proves once and for all that you don't fly a Citation - if anything.

Nope, not in the slightest.