PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Professional Pilot Training (includes ground studies) (https://www.pprune.org/professional-pilot-training-includes-ground-studies-14/)
-   -   Atpl Air Law Question (https://www.pprune.org/professional-pilot-training-includes-ground-studies/64064-atpl-air-law-question.html)

TangoAir 20th August 2002 22:34

Atpl Air Law Question
 
Hi,

What is the minimum radar separation for aircraft on the same localizer?

Gin Slinger 20th August 2002 23:38

suggest you move this one to the ATC forum - you can expect an expert response there.

TangoAir 21st August 2002 01:05

OK, good idea!

Alex Whittingham 21st August 2002 07:23

2½ miles

Gin Slinger 21st August 2002 09:36

Excellent...my devious plan worked to manipulate someone like Alex into giving us the answer!

TangoAir 21st August 2002 12:21

:) :) :)

Thanks Alex!

Tango

Broken Wings 21st August 2002 13:57

Whilst Alex is spot on it's worth adding the caveats to achieve that minimum.

Minimum of 2.5nm between succeeding a/c which are established on the localiser within 10nm of the runway end provided:
>The average statistical occupancy time of landing a/c does not exceed 50 seconds
>Braking action is good and no contaminants
>Radar must update in azimuth/range every 5 seconds or less
>The aerodrome controller is able to monitor the runway (visually, surface movement radar, surface movement guidance and control system)
>Wake Turbulence minima not a factor
>A/C approach speeds are closely monitored by the controller
>Crew must be aware of the need to exit the runway expeditiously when this minima is being applied
>Procedures concerning the application of this minima are published in the AIP

From AFT Av Law notes - hope this clarifies.

Gin Slinger 21st August 2002 22:47

2.5 answers the question - at this point, that's all that matters.


All times are GMT. The time now is 02:19.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.