PPRuNe Forums

PPRuNe Forums (https://www.pprune.org/)
-   Private Flying (https://www.pprune.org/private-flying-63/)
-   -   Met Form 215 (https://www.pprune.org/private-flying/220069-met-form-215-a.html)

Freelance2003 2nd April 2006 16:53

Met Form 215
 
Am I the only person who finds the new Met Form 215 difficult to interpret?
The graphics are lovely and clear, but the textual description is so complicated, with symbols and codes very densely packed. Then they try to economise on area references (A,B,C), so the symbols get jumbled up with lots that apply only to C1,C2 or C3.
I'm not against abreviated codes. TAF's and METAR's read well and are usually easily understood, but I think this Form 215 just tries to hard to abbreviate and get too much information into a couple of lines of code.
Did they really canvass GA pilots on this form?

Punditgreen 2nd April 2006 17:43

With you all the way.
Confusing even to Met Ob qualified people!
The thing I miss most is the map showing what was expected by the end of the fcst period. Comparing the two maps gave you an idea of how fast all the weather was moving.

funfly 2nd April 2006 20:45

In theory it was going to be easy but.........
I can't get used to it
It's early days
N.B. if you get to it from the Met Office site you can scroll down and get the forecast map if you want to see it. You won't get this on Avbrief where many of us normally get it from.

MichaelJP59 2nd April 2006 22:56

I've given it a fair go, but I agree that in some ways it isn't an improvement. Use of colour is a good idea, but the use of sub-areas C1, C2 etc. I think takes away clarity. I also preferred the freezing levels actually on the chart as an at-a-glance guide to the conditions.

Captain Jock 3rd April 2006 08:43

In answer to Freelance 2003 no, you are not alone. I have passed a written comment to the Met Office on this very point.

IO540 3rd April 2006 14:43

While you are at it, ask them to stop forecasting icing every day :O

On the old form it was more explicitly forecast for every cloud. This time they use the icing symbol and I think it means the same thing.

It undermines the forecast, frankly. They may as well forecast a +SHRA every day there is any cloud.

Aussie Andy 3rd April 2006 15:12

I think its good (perhaps I am alone?).

The thing I miss most is the map showing what was expected by the end of the fcst period.
This is a problem I agree - the map is still available on the MetOffice website, on the same page you get the PDF from, but it is not included within the PDF / graphic which is distributed via 3rd parties (e.g. Avbrief) so you have to go to MetOffice website to see this, which is not ideal.
Andy :ok:

buggies 3rd April 2006 15:22

It is not only difficult to interpret, it is sometimes wrong e.g the outlook referring to a D1 area which is not shown.
It also gives our less computer-literate pilots a problem since you now have to use Adobe reader to print the darn thing out and the isobar section is not included!
Have given them appropriate feedback (on the contact-us page) so suggest you add your voice there...

stuartforrest 3rd April 2006 16:26

Well 'ard to understand. I dont like it now.

I was really excited about the new met info to brighten up my otherwise dull pilot day but they are a real letdown and I agree with IO540 that there seems to be icing everywhere now.

TolTol 3rd April 2006 16:49

I can't decode the damn thing. And I'm supposed to do my me/ir anyday now:O

Aussie Andy 3rd April 2006 18:15

Are you guys joking, or can you really not decode the new F215!?

Andy :oh:

Freelance2003 5th April 2006 18:31

Clarity
 
No, Aussie, we're not saying we can't decode it. And I'm sure you're not saying that it's a good thing that it's hard work to use.
All we're saying is that it's unnecessarily hard work to decode it. As a piece of information communication it's hopeless. They've made it much more complicated by the A1,B1,B2 nonsense. What's wrong with D and E? Secondly the symbols have escalated in number to the extent that the compression of information clouds the message.

Aussie Andy 5th April 2006 18:34

Fair enough mate, but we may need to disagree

it's hard work to use
I guess I just don't see that myself, and I reckon we'll all get used to it. There is always resistance to change :)

Andy :ok:

IO540 5th April 2006 19:41

I think that on the scale of 0 to 10, where 0 is no information, and 10 is a 3D forecast of the atmosphere with accurate tops and icing potential presented on a website into which you could type in your route in 3D, the new F215 is about #5.

Obviously a lot depends on what's actually happening. If the situation is a high pressure covering much of Europe (e.g. summer 2003) which has been stuck there for weeks, F215 is just fine :O But if the weather is more complex, it's much less useful.

The UK Met Orifice could do a lot better with the data they do have, undoubtedly the best data that exists for the UK and running in the most accurate computer model there is for the UK, but the good stuff is offered only to paying parties. Like some of those £1.50/minute people who you can phone up.

I think the whole of aviation weather forecasting for private pilots is stuck in the WW1/WW2 time warp in which everything else (training included) is stuck and shows no sign of ever coming out. The whole European private pilot population (well those that fly beyond a 1hr-max burger run) ranges from irrelevant (UK) to nearly nonexistent (much of Europe) so there is no pressure to improve anything. It's different in the USA.

Fortunately WW2 ended a while ago and now there are other data sources. Unless it's a clear CAVOK situation, I always consult (in addition to the usual UK sources e.g. Avbrief) GFS, e.g.

http://www.arl.noaa.gov/ready/cmet.html

and the Animated Soundings at

http://pages.unibas.ch/geo/mcr/3d/meteo/

I think PPL training should include a short course entitled "how to get weather off the internet" :O


All times are GMT. The time now is 02:08.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.