Gyroflug SC-01-160 Speed Canard
Hi there
has anybody got some experience with this speed canard ? Handling? Do's and don'ts? What to look out for ? Where can I find a POH? thx Ronny |
Hi
hoping someone responds to you as I don't have experience on this pretty canard. I do remember reading about a test pilot flat spinning the only test machine. He was wearing a chute and could not break the flat spin. as it was their only machine he got out and attempted to put his weight on the front canard to break the spin. By then he was too low to jump and stayed with the aircraft till it came down still in a very gentle flat spin onto a beach. So slow was the descent that he walked away and they managed to repair the aircraft Pace |
Is that a true story? Sounds very remarkable...
I would be sh*tting my pants, sitting outside on the nose of a spinning aircraft seeing the ground get bigger and not being able to jump... How did he hold on? |
http://www.liveleak.com/view?i=c2d_1357418440
Pirke I am trying to find the report but remember it was a canard and flat spinned onto a beach with the test pilot walking away and the aircraft not badly damaged will keep googling but found this amazing footage of an unrelated flat spin where the pilot only just recovered and crash landed Pace |
found this amazing footage of an unrelated flat spin where the pilot only just recovered and crash landed |
That is a scary video
|
very interesting, but I still have not heard about the speed canard
Ronny |
The Velocity testing found that, in fact, deep stall entailed very low decent rates. They very likely are not survivable on land, but they certainly are at sea since more than one person has (with the old style Velocity seat, much like the Cozy). To quote the test pilot "Amazingly, Carl says that he could stick out a hand and feel hardly any air rushing against it as the Velocity descended ever nearer the ocean of St. Augustine. Although he was wearing a 'chute, he ultimately chose to ride the airplane down... and suffered no injuries." At high speeds water is only slightly less harmful than land. They reckoned that the descent rate was from 15-20 MPH. For reference 20 MPH is about 30 fps. |
Many years ago I had one flight in a Speed Canard and found it very pleasant. My only problem was that on the approach you looked over the top of the canard however in the flare this totally obscured the entire airfield. So one had to shift your view to beneath the canard in order to see the runway surface in the hold off prior to touchdown.
Trapper 69 :hmm: |
THat video above wasn't a canard in the spin but IIRC a Tipsy Nipper.
I remember it well as just before the spin stops the Pilot says 'well, this is it Neil' and manages to stop the spin and deadstick it on. AAIB report linked here Cusco |
The International Test Pilots School at Cranfield had one in the 1990s. G-FLUG.
I did one quick sortie in it and it was a delight to fly. Unbelievably responsive, fast, clean, quiet (with pusher prop) and superb viz all round. Having flown 1,000 flights in 150 different types, the Speed Canard SC01 would be the one to repeat if I could only have just one more. The only problem was that she didn't slow down on finals so I kept ending up high, and a touch of throttle and she was away. There's one based in Berne, Switzerland (HB-UCV) that I have seen flying low around the Bernese Oberland mountains. Owner knows what he is doing with it. See YouTube: http://youtu.be/o-Jz3m2XBOg Am extremely jealous. Email me if you get one! |
Hello Ronny,
I own a 116 PS speed canard. Handling is the same as the 160 PS canard. Flying is quite fun. Takeoff speed is 80 kts - Approach speed is 80 kts. You fly the plane down to the ground and then it sets itself - once it reaches ground effect. I can send you a POH from a 160 PS canard if it helps. I also have the forum Home - there are about 20 speed canard owners registered. In September we have a meeting in ETHN - Niederstetten. Hope the info helps Claus |
what s the best option for a propeller overhaul?
It s an MTU unit thx Ronny |
|
Thanks Claus
tried to send you a PM but that did not get through Ca you please PM me thx Ronny |
All times are GMT. The time now is 03:07. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.