Anybody driving a Sandel 3500 from a KLN94?
Thread Starter
Join Date: Jun 2003
Location: EuroGA.org
Posts: 13,787
Likes: 0
Received 0 Likes
on
0 Posts
Anybody driving a Sandel 3500 from a KLN94?
This is supposed to work OK, except, allegedly, when the KLN94 is in the OBS mode, when it emits a modified data stream which the 3500 may not display correctly.
Sandel are unable to confirm this either way - they might if somebody lent them a KLN94. From the UK, this is not easy or cheap for me to organise...
I know for a fact that when one is using a Garmin x30 to drive a KMD550 MFD (which the KLN94 drives 100% fine, as one would expect) the GNS's OBS mode does not get displayed correctly on the KMD550.
Sandel are unable to confirm this either way - they might if somebody lent them a KLN94. From the UK, this is not easy or cheap for me to organise...
I know for a fact that when one is using a Garmin x30 to drive a KMD550 MFD (which the KLN94 drives 100% fine, as one would expect) the GNS's OBS mode does not get displayed correctly on the KMD550.
Thread Starter
Join Date: Jun 2003
Location: EuroGA.org
Posts: 13,787
Likes: 0
Received 0 Likes
on
0 Posts
Yes, no response. They talk only via dealers.
In any case, it would be worthless. I had a GTX330 connected to a KLN94 for the purpose of auto GND/AIR mode switching, but despite this connection being specifically shown in the GTX330 installation manual, Garmin washed their hands of it and (more predictably) so did Honeywell. Never worked.
In any case, it would be worthless. I had a GTX330 connected to a KLN94 for the purpose of auto GND/AIR mode switching, but despite this connection being specifically shown in the GTX330 installation manual, Garmin washed their hands of it and (more predictably) so did Honeywell. Never worked.
