Sandel 3088 ehsi help
Hi
Recently been using a machine equipped with a sandel 3308. Been working fine but last flight the hdg bug has 'locked' and cannot be moved. Not sure if it's a mystery setting I may have activated? It's constantly aligned with the hdg of the aircraft but am unable to change it using the adjuster knob. Anyone have some insight to this piece of equipment? As the user manual has yielded nothing beneficial. |
Hmmm, did you write it up??
|
Not yet, as I'm not sure if it's a fault
It's got me buggered |
Not yet, as I'm not sure if it's a fault |
Hey Bounce,
You could try googling the Sandel site and go to the 'contact us' for 'support', it just MAY be sumphin' simple....(?) They are easy to find..... In the meantime, does this 'fault' make the aircraft U/S? (Wot does your MEL say..??) Cheers:ok: |
(Wot does your MEL say..??) |
SYNC function/button not stuck on?
|
Checked sync button but releasing as normal (checked with sub menu)
The aircraft is fully serviceable as its a passive rh instrument. |
Have you tried the SN3308 version of CTL-ALT-DEL
Hold down BRG-NAV-MAP when powering up. (procedure to remove it from demo mode) That's all I've got????:hmm: |
Haha I was hoping to save that for the enevitable bsod :-)
|
Is the fault temperature related? I've heard of this happening with cold and hot temps. In one instance, reseating the unit helped.
Unfortunately, in most cases, the fault is with the heading selector knob, which isn't a potentiometer, but a digital shaft encoder. If that's the case, it's a factory or if you're lucky, a field replacement/repair. Definitely not a settings issue. |
All times are GMT. The time now is 08:52. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.