What does it mean?
I give up!! 20 years of sitting in Boeing flight decks, it has finally got the better of me. What does the white plus sign ("+") on all the selector panels, signify?
Cockpit Door-Closed |
It marks the location of the internal lighting for the panel.
|
Earthing point for internal panel lighting.
No panel lights? Press on + and possibly panel lights. :} |
I was told that it was where the wiring loom connected to the panel.
|
I was reliably informed :p that they are marks used during manufacture to accurately align the panel hole cutters (for the instrumentation, etc).
Next please! |
something to stare at on long hauls?
|
Not just Boeing, Bombardier have the same thing. My understanding is the same as The_Cutest_of_Borg:) , but we may be wrong.
In relation to the +, if it is the location of the wiring loom to the panel why do we(Pilots) need to know? Could it be the spot to make a "technical tap" if required :uhoh: :hmm: which could make Capt Claret's version more likely. I like your version Kaptin M but I would have thought that the more modern panels would be produced in a mass 'jig' with mega accurate laser cutters. Next;) . |
The cross shows where the lighting panel connector is, it is usually a small round plug almost like a tv aerial plug in shape but about half the size which has a corresponding socket on the overhead panel chassis. Shows you where to press to ensure it has mated after you have had the panel apart.
|
The truth is...
Actually, it is where the wiring loom/cannon plug/ earth connection is. Not just for the backlighting necesarily but sometimes the gauge itself. Yes, because the panels do flex, you are supposed to press in that area after installation to assure a firm seat, and yes you can press on that part if the gauge doesn't work or the backlighting goes out.
Source was Boeing. |
Great
Now there's going to be a plethora (or maybe even a lot) of requests for flight deck visits just to look at the little plus signs. |
They also exist in Airbus aircraft as well. The only difference is they are blue and can sometimes be difficult to see. I asked a ground engineer what they were once and he informed me that that is the place you hit (tap) when the lights in that panel go out.
|
Oral exams...
E-mail me with any questions on B-737/57/67. I used to do company orals on the 75/76. Sometimes we had to dig pretty deep to satisfy that "one guy" in every class.
|
"that that is the place you hit (tap) when the lights in that panel go out."
How do you know where it is if the lights are out? :D |
Qduck
I did say that panel, i.e. fuel, hyd, elec, etc. Hopefully I would still have the other panels and the dome light. If not then the torch.:ok: |
All times are GMT. The time now is 23:15. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.