Wikiposts
Search
The Pacific: General Aviation & Questions The place for students, instructors and charter guys in Oz, NZ and the rest of Oceania.

Melbourne City Orbits

Thread Tools
 
Search this Thread
 
Old 8th Mar 2022, 01:01
  #1 (permalink)  
Thread Starter
 
Join Date: Feb 2022
Location: Sydney
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Melbourne City Orbits

Hey guys, I'm wondering if someone can assist me with the procedures of doing orbits. I'm planning to head to do a few orbits from out Lethbridge way. I've been advised to report to Essendon tower and squawk 0100 at Laverton BOM Tower. Is there anything else I should know? Do they give a heading or is there a set route? I'd really appreciate an account of someones experience who's successfully done them coming from the West (or knows how), as the youtube vids and info I've been able to source hasn't been very helpful

TIA
q400link is offline  
Old 8th Mar 2022, 04:19
  #2 (permalink)  
 
Join Date: Apr 2005
Location: Melbourne
Posts: 3,870
Received 191 Likes on 98 Posts
I usually just do a clockwise orbit and go a little outside the CBD, so over the old exhibition building and over the MCG for example. I did get a direction once with the clearance, to stay east of the Westgate bridge. Otherwise pretty informal, just tell them how many orbits you’d like and confirm clockwise.
Squawk7700 is offline  
Old 8th Mar 2022, 05:59
  #3 (permalink)  
 
Join Date: Aug 2011
Location: Melbourne
Age: 54
Posts: 112
Likes: 0
Received 1 Like on 1 Post
Here's what I do..
Get the YMEN ATIS on 119.8 in plenty of time. Check it again and squawk 0100 just prior to contacting YMEN TWR on 125.1 (I do this about 1 mile SW of Albert Park, YMMV..) Contact YMEN TWR with position, altitude (1500') and request [preferred direction] Melbourne City orbit (usually RH, but again, YMMV..).
Don't be afraid to request 2000' if you're doing a LH orbit and someone else is doing a RH orbit (or vice versa)
Occasionally you might not get your preferred direction due traffic, or you may have to hold for a few minutes.
Get someone else to operate the camera!

Stikman is offline  
Old 8th Mar 2022, 19:22
  #4 (permalink)  
 
Join Date: Jan 2020
Location: Melbourne
Posts: 136
Received 17 Likes on 8 Posts
I'd fly at 1500ft sqawk 0100 above Altona and get ATIS (119.8), then at Williamstown call YMEN TWR (125.1) request RH/LH orbit.
The key is not to enter Class C without clearance.
Cheers
Bosi72 is online now  
Old 8th Mar 2022, 19:43
  #5 (permalink)  
 
Join Date: Jan 2020
Location: Melbourne
Posts: 136
Received 17 Likes on 8 Posts
was going to send you a video but..

The following errors occurred with your submission:
q400link has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
Bosi72 is online now  
Old 8th Mar 2022, 20:22
  #6 (permalink)  
 
Join Date: Jul 2006
Location: Up yer nose, again.
Age: 67
Posts: 1,232
Received 15 Likes on 12 Posts
Originally Posted by Squawk7700
confirm clockwise.
???????

How about left hand or right hand orbits.
Most up and coming pilots these days wouldn't know what clockwise is.
Peter Fanelli is offline  
Old 8th Mar 2022, 22:39
  #7 (permalink)  
Thread Starter
 
Join Date: Feb 2022
Location: Sydney
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
try now mate
q400link is offline  
Old 9th Mar 2022, 09:47
  #8 (permalink)  
Thread Starter
 
Join Date: Feb 2022
Location: Sydney
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
try now actually, it wasn't cleared
q400link is offline  
Old 14th Oct 2022, 06:35
  #9 (permalink)  
 
Join Date: Oct 2022
Location: Melbourne
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
code?

Why do you need to squawk 0100?
ANEK361980 is offline  
Old 14th Oct 2022, 19:34
  #10 (permalink)  
 
Join Date: Aug 2011
Location: Melbourne
Age: 54
Posts: 112
Likes: 0
Received 1 Like on 1 Post
Originally Posted by ANEK361980
Why do you need to squawk 0100?
VFR code into YMEN.
Stikman is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.