Go Back  PPRuNe Forums > PPRuNe Worldwide > The Pacific: General Aviation & Questions
Reload this Page >

A320 incident wrong lever in haste

The Pacific: General Aviation & Questions The place for students, instructors and charter guys in Oz, NZ and the rest of Oceania.

A320 incident wrong lever in haste

Old 7th Oct 2019, 13:07
  #1 (permalink)  
Thread Starter
 
Join Date: Jun 2000
Location: Australia
Posts: 4,186
Likes: 0
Received 6 Likes on 4 Posts
A320 incident wrong lever in haste

https://www.skybrary.aero/index.php/...rpool_UK,_2018
Centaurus is offline  
Old 7th Oct 2019, 22:16
  #2 (permalink)  
 
Join Date: Sep 2018
Location: Melbourne
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Interesting, not surprised really as we are after all humans. I recall doing this exercise in the Sim years ago with no re-select of the flaps, sure got yr attention if you didn't firewall the bus (if not already) & lower the snout asap! Does show one thing though, with all the training, all the feel good CRM & multiple ground school feet putting to sleep days we can still stuff it up! Imagine how many similar acts are done daily world wide?
machtuk is offline  
Old 7th Oct 2019, 22:43
  #3 (permalink)  
 
Join Date: Jun 2001
Location: Above the Trenches
Posts: 189
Received 1 Like on 1 Post
Very similar incident to a NJS Airlink BAe146 taking off out of Cairns in the nineties. Stick shaker and stick push activated. No immediate increase in thrust( flex thrust takeoff power).
ATC in tower hit the crash button as it disappeared (RWY 33) then watched it re-emerge from the hills.
The Baron is offline  
Old 7th Oct 2019, 23:52
  #4 (permalink)  
 
Join Date: Nov 2013
Location: Equatorial
Age: 51
Posts: 1,054
Received 115 Likes on 57 Posts
Happened to me moons ago at thrust reduction. For some reason FO thought I said flaps zero and put them to zero with no additional confirmation of speed or the like. Interesting! A quick firewall and some flying and no issue just a slightly elevated heart rate!

Different airline mate had it happen to him quiet low, can’t remember the events leading to that one!

It happens, always be alert!!!
Global Aviator is offline  
Old 8th Oct 2019, 01:11
  #5 (permalink)  
 
Join Date: Jul 2008
Location: Australia
Posts: 1,244
Received 188 Likes on 84 Posts
There is also the selecting park brake instead of flap trick that will manifest itself as a very short field landing and blown tyres. Always a good lesson in confirming what you are doing with a lever before actioning the command.
Lookleft is offline  
Old 8th Oct 2019, 15:20
  #6 (permalink)  
Thread Starter
 
Join Date: Jun 2000
Location: Australia
Posts: 4,186
Likes: 0
Received 6 Likes on 4 Posts
Similar story except on short final in a Lincoln bomber at Townsville in the late 1950's. The pilot under instruction was our Commanding Officer, Wing Commander Cy Greenwood. He was a former prisoner of war of the Japs in 1943 after being shot down in his Beaufighter while strafing Jap float planes at Timor. The Japs weren't best pleased so they tortured him.

We were doing dual circuits in the Lincoln when he asked for full flap on final for runway 02 Townsville. The flap lever was a push/pull vertical selector with a neutral position after each flap selection.

I selected full flap for him and once the gauge showed full flap I selected the lever back to neutral as SOP. On very short final the Lincoln started to sink rapidly and fell out of the sky and bounced heavily.
The CO said "WTF" and firewalled all four engines and went around. Aircraft didn't have stick shakers in those days. The CO then asked for flap retraction as part of the go-around. I went to select flaps up then realised to my chagrin the flaps were already up.

Turned out when the CO had asked for full flap on final, I had inadvertently missed the neutral position of the flap lever and instead had selected flaps up. So the full flap landing turned out to be a flaps up landing but without increasing the Vref speed. The result was very heavy landing and very loud oaths by the CO and grovelling apologies by self the instructor..
Centaurus is offline  
Old 8th Oct 2019, 21:46
  #7 (permalink)  
 
Join Date: Aug 2004
Location: moon
Posts: 3,564
Received 89 Likes on 32 Posts
This type of incident “ought’ to be the subject of advice from CASA, but it apparently isn’t.

FWIW, I think I gleaned enough from reading to learn the mantra when touching flaps and gear handles to use the verbal mantra: “landing gear selected up, (look)Three greens, landing gear is Up”. and it’s variants. Simply flicking the switch and not visually confirming almost got me killed once.
Sunfish is offline  
Old 8th Oct 2019, 22:02
  #8 (permalink)  
 
Join Date: May 2016
Location: Sunshine Coast
Posts: 1,146
Received 181 Likes on 90 Posts
Way back at what was probably the birth of human factors, flight crews confusing flap and gear levers was one of the first trends noticed by Dr Paul Fitts. That was back in 1947.
MickG0105 is offline  
Old 8th Oct 2019, 22:20
  #9 (permalink)  
 
Join Date: May 2018
Location: United Kingdom
Posts: 85
Likes: 0
Received 0 Likes on 0 Posts
I'm barely into my PPL and can confirm that this almost happened to me already. We were taking off in a 152 and my instructor called for flaps to be raised in stages - instinctively my hand went to the flap lever, my eyes were on the horizon heads up and I "felt" my way to raising flap by 1 stage.

Cue my instructor shouting loudly and quickly snatching it out of my hand to lower to the correct position, luckily it hadn't had any adverse effects by the time he'd spotted it and intervened. I hadn't realised what I'd done wrong until we cleared busy airspace and he explained it to me. In fact we went to a safe altitude and he showed me exactly what happens when you go from full to 0 flap and just how much altitude you can lose.

I was also told it happens quite a lot, especially with students when calling a go around and I should always be on the lookout. Didn't realise even 320 pilots with that many hours could be susceptible too!
shamrock_f22 is offline  
Old 8th Oct 2019, 23:57
  #10 (permalink)  
 
Join Date: May 2019
Location: Aust
Posts: 399
Received 30 Likes on 14 Posts
I've heard of a captain, in his haste, initiating an emergency descent mid Pacific Ocean following an unrelated cockpit aural warning.
deja vu is offline  
Old 9th Oct 2019, 01:23
  #11 (permalink)  
 
Join Date: Aug 2004
Location: moon
Posts: 3,564
Received 89 Likes on 32 Posts
The problem with the electric flap switch on Cessna singles is that you can get a bit of crap on the switch contacts and the switch will “stick” in whatever position it’s in.

That is why a go around from full flaps at close to MTOW should not be tried when learning STOL techniques. If the switch sticks when flaps up selected with full flaps down (40deg) and you try to go around, you won’t be climbing. We did a circuit around a tree at 50’ just above stall speed and made it back to the strip. Don’t apply full flap until you commit to a full stop.
Sunfish is offline  
Old 9th Oct 2019, 14:21
  #12 (permalink)  
 
Join Date: Oct 2007
Location: Here and there
Posts: 386
Likes: 0
Received 0 Likes on 0 Posts
In fact we went to a safe altitude and he showed me exactly what happens when you go from full to 0 flap and just how much altitude you can lose.
If you are talking about retracting the flap from full down to up in one go in a Cessna 152, you shouldn't normally lose more than 100 feet of altitude providing you adjust the nose attitude up to cover the slight sink. Your instructor sounds like a panic merchant if he shouted loudly and snatched the flap lever out of your hand then climbed to a "safe" altitude. What did your instructor consider a "safe" altitude? Sounds like the instructor needs retraining.

It is only a Cessna 152 for goodness sake. Check the C152 Cessna Information manual where it states: In a baulked landing (go-around) climb the wing flap setting should be reduced to 20 degrees immediately after full power is supplied. Upon reaching a safe airspeed 55 knots wing flaps retract slowly.
Judd is offline  
Old 9th Oct 2019, 14:36
  #13 (permalink)  
 
Join Date: May 2018
Location: United Kingdom
Posts: 85
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Judd
If you are talking about retracting the flap from full down to up in one go in a Cessna 152, you shouldn't normally lose more than 100 feet of altitude providing you adjust the nose attitude up to cover the slight sink. Your instructor sounds like a panic merchant if he shouted loudly and snatched the flap lever out of your hand then climbed to a "safe" altitude. What did your instructor consider a "safe" altitude? Sounds like the instructor needs retraining.

It is only a Cessna 152 for goodness sake. Check the C152 Cessna Information manual where it states: In a baulked landing (go-around) climb the wing flap setting should be reduced to 20 degrees immediately after full power is supplied. Upon reaching a safe airspeed 55 knots wing flaps retract slowly.
He's not a panic merchant at all, he's a sensible guy who is safety conscious and taught me many things other instructors never pay attention too. I trust him over anyone else at the academy and at the end of the day, you weren't there and I don't have a robotic memory to give you a second by second account so you'll just have to trust that it was appropriate to the situation rather than being an armchair commentator.

Its "just" a 152 until you cock up and risk your own and/or someone else's life because you've not understood the impact of your actions. I'm well aware what the manual states and they don't reach it any differently, but that's not what I was talking about.
shamrock_f22 is offline  
Old 9th Oct 2019, 22:34
  #14 (permalink)  
 
Join Date: Nov 2013
Location: Equatorial
Age: 51
Posts: 1,054
Received 115 Likes on 57 Posts
It is always ok to go around! Well unless the fan/fans have stopped rotating.

Global Aviator is offline  
Old 9th Oct 2019, 23:01
  #15 (permalink)  
 
Join Date: Jun 2001
Location: FNQ ... It's Permanent!
Posts: 4,282
Received 162 Likes on 83 Posts
Originally Posted by shamrock_f22
We were taking off in a 152 and my instructor called for flaps to be raised in stages -
Just how much flap do you use for take off in a c152?
Capt Fathom is offline  
Old 9th Oct 2019, 23:28
  #16 (permalink)  
 
Join Date: Aug 2004
Location: moon
Posts: 3,564
Received 89 Likes on 32 Posts
From memory zero flap. He was going around. The call is full throttle, reduce flap to 20 to get a positive ROC then progressively reduce. The aircraft won’t necessarily climb out of ground effect with more than 20 degrees.
Sunfish is offline  
Old 10th Oct 2019, 21:06
  #17 (permalink)  
 
Join Date: Jan 2004
Location: Here and there
Posts: 3,089
Received 14 Likes on 11 Posts
It has happened to me in an Avro RJ at lift off. I called for gear up and he put the flaps to zero. Experienced FO too, just a brain fart I guess. I concentrated on flying, he put the flap lever back to 18, no harm done.
AerocatS2A is online now  
Old 11th Oct 2019, 00:38
  #18 (permalink)  
 
Join Date: Jun 2001
Location: FNQ ... It's Permanent!
Posts: 4,282
Received 162 Likes on 83 Posts
I have noticed some crew, in excited anticipation of your next call, place their hand either on or very close to the controls, eg. flap lever. So guess what happens when you sneeze!!
Capt Fathom is offline  
Old 11th Oct 2019, 04:03
  #19 (permalink)  
Thread Starter
 
Join Date: Jun 2000
Location: Australia
Posts: 4,186
Likes: 0
Received 6 Likes on 4 Posts
I have noticed some crew, in excited anticipation of your next call, place their hand either on or very close to the controls, eg. flap lever. So guess what happens when you sneeze!!
Agree. Quite common observation in the simulator. Can be most distracting as well as potentially disastrous. Similar to a B737 PM backing up the thrust levers until V1 during the takeoff roll with his hand when it is unnecessary since there is no external friction nut like a DC3 where the throttles can slip back if the fiction nut is not working properly.

The danger of unnecessary backing up until V1 with the hand behind the thrust levers (or throttles with some types) in the 737, is that a sharp closing of the thrust levers by the PF if he perceives an abort is necessary and there is no time to politely request the PM to kindly gets his mitt out of the way so an abort can be accomplished without delay.. This may jam the PM's hand between the back edge of the thrust levers and the adjacent start levers. Very painful and worst case the PF may not be able to fully close the thrust levers to idle if the PM's hand is in the way.
There are so many gimmicks perpetuated by some pilots either brought across from previous types or copied during simulator training. While this all sounds a bit trivial now, it can be distracting to another crew member. A PM hovering over the controls with feet on the rudder pedals is another unnecessary and distracting habit one frequently sees in the simulator.
Centaurus is offline  
Old 11th Oct 2019, 04:54
  #20 (permalink)  
 
Join Date: Aug 2002
Location: Australia
Posts: 314
Received 5 Likes on 1 Post
Originally Posted by Capt Fathom
I have noticed some crew, in excited anticipation of your next call, place their hand either on or very close to the controls, eg. flap lever. So guess what happens when you sneeze!!
I move my hand to the vicinity if we are getting close to the limit speed. Both speeding up and slowing down. Is this not sensible to prevent an overspeed or ending up below speed? I don't physically touch it, never had anyone say anything.
Slezy9 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.